JØNI Induction Range IN 650

Product Overview

The JØNI Induction Range IN 650 features cooking zones with an effect of 4 kW each. The power can be limited to a maximum of 16 or 20 Amp depending on the variant. The induction coils measure 210x210 mm per zone. Variants are available with an ordinary or vari frame, or as a tabletop model.

Accessories:

• Electrical height regulation (VARI)
• Table top (TT)
• Current limitation
• Sea rail
• Handrail
• Floor attachment
• Prepared for power management
• Signal for the extractor

Technical Data - Electric

Refer to the user manual for important information regarding supply and connections.

3~400V+PE / 3~400V+N+PE, 50/60Hz

3~440V+PE, 50/60Hz

Technical Data - Ventilation

3~400V and 3~440V

The data is based on the German standard VDI 2052 for dimensioning of ventilation facilities. Values are based on average product usage. Actual demand may vary based on appliance efficiency, control, and usage. The simultaneity factor from VDI 2052 is not included.

Ingress Protection Class

IPX5

Dimensions of the Product

IN 654

Main Unit Dimensions:

• Width: 650 mm
• Depth: 600 mm
• Height: 850-900 mm
• Height of cooking surface from floor: 300 mm

Refer to the 'Dimensions for installation' section for space requirements around the appliance.

Additional Equipment - Electric Height Adjustment (Vari)

Dimensions:

• Width: 650 mm
• Depth: 600 mm
• Height: 800-1000 mm
• Height of cooking surface from floor: 200-400 mm

Refer to the 'Dimensions for installation' section for space requirements around the appliance.

Additional Equipment - Tabletop Model (TT)

Dimensions:

• Width: 650 mm
• Depth: 600 mm
• Height: 300 mm

Refer to the 'Dimensions for installation' section for space requirements around the appliance.

Fiddles

Dimensions:

• Width: 75 mm
• Depth: 26 mm
• Height: 702 mm

This accessory requires floor mounting and cannot be combined with electric height adjustment.

Hand rail

The accessory requires floor mounting and cannot be combined with electric height adjustment.

Side Shelf

Dimensions:

• Width: 30 mm
• Depth: 250 mm
• Height: 650 mm

Side shelves can be mounted on the left, right, or both sides of the appliance.

Fixing to the Floor

Dimensions:

• Diameter: 75 mm
• Base Diameter: 102 mm
• Height: 52 mm
• Flange Diameter: 14.5 mm

Cannot be combined with electric height adjustment.

Power Management

The range can be delivered with current limitation according to DIN 18875. For connection, 1.5 mm² clamp terminals are located inside the appliance.

Signal to the Exhaust Hood

The range can be supplied with a potential-free contact set for signaling the extractor. The signal must be a maximum of 230 VAC and 8 A. For connection, 1.5 mm² clamp terminals are located inside the appliance.

Dimensions for Installation

IN 654

Clearance Requirements:

• Minimum 1200 mm electrical cable over the floor.
• Minimum 100 mm clearance when placed next to inflammable materials.
• For usage and service, a minimum clearance of 700 mm in front of the range is required.

Diagram Description:

A top-down view showing the appliance footprint with minimum clearances. A: Minimum 1200mm electrical cable over the floor. Minimum 100mm clearance to inflammable materials. Minimum 10* clearance on sides and back.

IN 654 Vari

Clearance Requirements:

• Minimum 850 mm electrical cable over the floor.
• Minimum 100 mm clearance when placed next to inflammable materials.
• For usage and service, a minimum clearance of 700 mm in front of the range is required.

Diagram Description:

A top-down view showing the appliance footprint with minimum clearances for the Vari model. A: Minimum 850mm electrical cable over the floor. Minimum 100mm clearance to inflammable materials. Minimum 50* clearance on sides and back.