User Guide for studio-tech models including: 5204 Dual Line Input to Dante Interface, 5204, Dual Line Input to Dante Interface, Line Input to Dante Interface, Input to Dante Interface, Dante Interface, Interface
ation - Studio Technologies, Inc.
File Info : application/pdf, 11 Pages, 800.38KB
DocumentDocumentModel 5204 Dual Line Input to DanteTM Interface
User Guide
Issue 1, August 2014 This User Guide is applicable for serial numbers M5204-00151 to 02000 with application firmware 1.1 and later
and Dante firmware 2.7.1 (Ultimo 4.0.11.3)
Copyright © 2014 by Studio Technologies, Inc., all rights reserved studio-tech.com
50278-0814, Issue 1
TableofContents
Introduction................................................................... 3 Connections.................................................................. 6 DanteConfiguration...................................................... 7 Operation...................................................................... 7 TechnicalNotes............................................................ 10 Specifications............................................................... 11
Model 5204 Dual Line Input to Dante Interface
Introduction
TheModel5204Interfaceisageneral- purposeaudiodevicethatsupportsapplicationsutilizingtheDanteTMAudio-overEthernetmedianetworkingtechnology.Two 2-channel("stereo")analogline-levelaudio signalscanbeconnectedtotheModel 5204andthenconvertedtotwochannels onanassociatedDanteconnection.
Analogaudiosignalsconnecttolineinput Abywayofa3-conductor("stereo")3.5 mmjack.Thisallowsthedirectinterfacing ofsignalsfromavarietyofsourcessuch aspersonalaudioandmultimediaplayers, smartphones,andpersonalcomputers. Thesesignalstypicallyhaveanaverage (nominal)signallevelintherangeof20to 10dBu.LineinputBsupportsconnection ofbalancedanalogaudiosignalsusingtwo XLRconnectors.Averagesignallevelsfor thesetypesofsignalsaretypicallyinthe rangeof0to+4dBu.Eachinputhasan associateddual-channelrotarylevelcontrol tooptimizeitsaudioperformance.Followingthelevel"pots"thesignalsfrominputs AandBaresummed(combinedormixed together)tocreateone2-channelsignal. (Thechannel1signalsoflineinputsAand Baresummedtocreateoutputchannel 1;channel2signalsoflineinputsAandB aresummedtocreateoutputchannel2.)
Thetwochannelsarethenoutputbywayof theDanteinterface.Multi-stepLEDmeters provideconfirmationofthelevelofthetwo outputaudiochannels.
TheaudioqualityoftheModel5204is excellent,withlowdistortionandnoiseand highheadroom.Carefulcircuitdesignand excellentcomponentsensurelong,reliable operation.Awiderangeofapplications canbesupported,includingTV,radio,and streamingbroadcastevents,corporateand governmentAVinstallations,andDante systemtesting.
Foruserconvenienceadedicatedchargingport(DCP)isprovidedonastandard USBtypeAconnector.Thisallowspoweringandchargingofassociateddevices, suchaspersonalaudioplayersandtablets. Thecompact,lightweightdesignallowsthe Model5204tobeusedinportableordesktopsituationsordeployedasapermanent solutioninfixedapplications.Standardconnectorsensurefast,reliabledeployment. TheunitrequiresonlyanEthernetconnectiontosupplyboththedatainterfaceas wellasPower-over-Ethernet(PoE)power. TheModel5204'saudio,data,anddedicatedchargingportusepowerprovidedby thePoEconnection.
Figure1.Model5204DualLineInputtoDanteInterfacefrontandrearviews
Model5204UserGuide StudioTechnologies,Inc.
Issue1,August2014 Page3
Model 5204 Dual Line Input to Dante Interface
Applications
TheModel5204isperfectforuseinconjunctionwithavarietyoffixedandportableaudio equipmentthatofferanalogoutputsignals. Anobviousapplicationiswithlegacyequipmentthatonlyoffersanalogoutputs.Afew simpleconnectionsareallthat'srequiredto covertthosesignalsintotheworldofAudioover-Ethernet.Whendeploying,maintaining, ormodifyingDantenetworkstheunitcan beausefultesttool,offeringasimple,highqualitymeansofcreatinga2-channelsignal source.Forpermanentapplicationsthere's noreasonwhyaModel5204can'treside withinanequipmentrackorbemounted, usingoptionalbrackets,underneathatable oron-airstudioset.Inaconferenceroom settingtheunitcanbepermanentlyconnectedtoaPoE-enabledEthernetport,readyto acceptasignalsourcefromvarioususerprovideddevices.
LineInputA
Usinga3-conductor("stereo")3.5mmjack, it'sasimplemattertoconnectunbalanced sourcestotheModel5204'slineinputA. Thesesignalswouldtypicallybeprovided bypersonalcomputers,smartphones,or personalaudiodeviceswhichhaveaverage (nominal)levelsintherangeof20to10 dBu.Onerotarycontrolisusedtoadjust theinputlevel,makingitasimpletaskto optimizetheconversionoftheinputanalog audiosourcetotheDanteoutput.Thelevel knobisapush-in/push-outtypewhichhelps preventinadvertentadjustment.
LineInputB
TheModel5204'slineinputBisdesignedfor usewithprofessionalline-levelanalogaudio signals.The2-channelinputiselectronically balanced,capacitor-coupled,andusestwo
standard3-pinfemaleXLRconnectors.A singlerotarylevelcontrolallowstheinput sensitivityofbothchannelstobeadjusted. Usingthepush-in/push-outknobit'sa simplemattertoadjusttheinputcircuitry tomatchaverage(nominal)signallevels whichwouldtypicallybeintherangeof 0to+4dBu.Andwithamaximuminput levelof+24dButherewillalwaysbe sufficientheadroomfor"pro"audioperformance.Protectioncomponentsintheinput circuitryhelpensurereliabilityintoughfield applications.
Summing(Mixing)oftheInput Signals
Thetwochannelsassociatedwithlineinput Aandthetwochannelsassociatedwithline inputBaremixed(summed),senttoanalog-to-digitalconversioncircuitry,andthen transmittedovertheDantenetwork.The twosignalsassociatedwiththechannel1 (or"left")inputsarecombinedandsentout Dantechannel1.Thetwosignalsassociatedwiththechannel2(or"right")inputsare combinedandsentoutDantechannel2. (Thereisnoprovisionforcreatingamonauralsignalwhichistypicallynotanissueas otherconnectedDante-enabledequipment canusuallyperformsuchtasks.)
Metering
Two7-stepLEDmetersprovideareal-time levelindicationofthetwoaudiooutput channels.ScaledindBFS(decibelsreferencedtofullscaledigital)themetersoffer adirectviewofthesignallevelsasthey aretransportedinthedigitaldomainvia Dante.Optimalaudioperformancerequires transportingsignalsattheirproperlevels --withoutanaccurateindicationthiscan bedifficulttoachieve.
Issue1,August2014 Page4
Model5204UserGuide StudioTechnologies,Inc.
Model 5204 Dual Line Input to Dante Interface
EthernetDataandPoE
TheModel5204connectstoadatanetworkusingastandard100Mb/stwistedpairEthernetinterface.Thephysical interconnectionismadebywayofa Neutrik®etherCONRJ45connector. WhilecompatiblewithstandardRJ45 plugs,etherCONallowsaruggedizedand lockinginterconnectionforharshorhighreliabilityenvironments.AnLEDdisplays thestatusofthenetworkconnection.
TheModel5204'soperatingpoweris providedbywayoftheEthernetinterface usingthePower-over-Ethernet(PoE)standard.Thisallowsfastandefficientinterconnectionwiththeassociateddatanetwork. TosupportPoEpowermanagement,the Model5204'sPoEinterfacereportstothe powersourcingequipment(PSE)thatit's aclass3(midpower)device.AnLEDis providedtoindicatewhenpowerisbeing suppliedtotheModel5204.Notethatno provisionhasbeenmadetoallowanexternalpowersourcetobeconnected.However,iftheassociatedEthernetswitchdoes notprovidePoEcapabilityacommonlyavailablemid-spanPoEpowerinjector canbeutilized.
DedicatedChargingPort (DCP)
AuniqueresourceistheModel5204's dedicatedchargingport.Usingastandard USBtypeAreceptacle,theporthasa 5voltoutputwithamaximumcurrentof approximately1amp.Thisnominally 5wattoutputshouldbesufficienttorapidly chargeapersonalaudioplayer,smartphone,ortabletdevice.Anauto-detectfeaturesupportsdividermode,shortmode,
and1.2V/1.2Vchargingmodes.Besides charging,theportcanallowaconnected devicetocontinuouslysendaudiotothe associatedDantenetworkwithoutrequiring anexternalpowersource.Notethatinthis situationinterfacingadevicewiththeModel 5204requiresseparatecables,oneforthe analogaudiosourceandoneforpowering/ charging.
Onenoteofinterest:thededicatedchargingportderivesitspowerfromtheEthernet withPower-over-Ethernet(PoE)connection.WhiletheModel5204'saudioand datacircuitrytakesverylittleenergy,the dedicatedchargingportcansourceupto approximately5watts.Assuch,theModel 5204'sEthernetinterfacewillidentifyitself toupstreampower-sourcing-equipment (PSE),typicallyanEthernetswitchwith integratedPoE,asaPoEclass3powered device(PD).
DanteAudio-over-Ethernet
AudiodataissentfromtheModel5204 usingtheDanteAudio-over-Ethernetmedia networkingtechnology.AsaDante-compliantdevice,theModel5204'stwoaudio channelscanbeassignedtootherdevices usingtheDanteControllersoftwareapplication.Bitdepthsofupto24andsample ratesof44.1,48,88.2,and96kHzare supported.Twobi-colorLEDsprovidean indicationoftheDanteconnectionstatus. TheModel5204usesAudinate'sUltimoTM integratedcircuitforimplementingDante. Theintegratedcircuit'sfirmwarecanbe updatedviatheEthernetconnection,helpingtoensurethatitscapabilitiesremainup todate.
Model5204UserGuide StudioTechnologies,Inc.
Issue1,August2014 Page5
Model 5204 Dual Line Input to Dante Interface
Connections
Inthissectionsignalinterconnectionswillbe madeusingtheconnectorslocatedonthe frontandbackpaneloftheModel5204.An EthernetdataconnectionwithPower-overEthernet(PoE)capabilitywillbemadeusing eitherastandardRJ45patchcableoran etherCONprotectedRJ45plug.Line-level signalsourceswillbeconnectedusingthe 3.5mmjackassociatedwithlineinputAand the3-pinXLRconnectorsassociatedwith lineinputB.TheUSBdedicatedcharging portcanbeconnectedtopowerorcharge anexternaldevice.
SystemComponents
IncludedintheshippingcartonisaModel 5204Interfaceandaprintedcopyofthe userguide.
EthernetConnection
A100BASE-TXEthernetconnectionthat supportsPower-over-Ethernet(PoE)is requiredforModel5204operation.This oneconnectionwillprovideboththeEthernetdatainterfaceandpowerfortheModel 5204'scircuitry.A10BASE-Tconnectionis notsufficientanda1000BASE-T("GigE") connectionisnotsupportedunlessitcan automatically"fallback"to100BASE-TX operation.ForPoEswitch(PSE)power managementtheModel5204willenumerate itselfasaPoEclass3device.
TheEthernetconnectionismadebywayof aNeutriketherCONprotectedRJ45connectorthatislocatedonthebackpanelof theModel5204.Thisallowsconnectionby wayofacable-mountedetherCONplugor astandardRJ45plug.TheModel5204's EthernetinterfacesupportsautoMDI/MDI-X sothatmostcablingimplementationswillbe correctlysupported.
LineInputA
LineinputAisintendedforconnection witha2-channel(stereo)unbalancedlinelevelanalogaudiosignalsource.Thiswill typicallybeassociatedwithconsumerand semi-professionaldevicessuchaspersonal audioplayers,AVequipment,andtablet andpersonalcomputers.Thesesignals willtypicallyhaveanominallevelinthe rangeof15to10dBu.DevicesareconnectedtolineinputAbywayofa3.5mm 3-conductorjacklocatedontheModel 5204'sfrontpanel.Asisstandardfor2channel(stereo)audiosignalspresenton thistypeofconnectorchannel1(left)is connectedtothejack'stiplead,channel2 (right)tothejack'sringlead,andthecommonconnectiontothejack'ssleeve.
LineInputB
LineinputBisintendedforconnectionwith twobalancedline-levelanalogaudiosignal sourcesassociatedwithprofessionalaudio andvideoequipment.Thesewillinclude devicessuchasaudioconsoles,video storageandplaybacksystems,wireless microphonereceivers,andaudiotesting equipment.Theaudioqualityissuchthat usinglineinputBforon-airbroadcastor streamingapplicationswouldbeappropriate.Thetwochannelsassociatedwithline inputBareanalog,electronicallybalanced, andcapacitorcoupled.
TheModel5204providestwo3-pinfemale XLRconnectorsforinterfacingsignalswith lineinputB.Pin2onamatingconnector (3-pinmaleXLR)shouldbeconnectedas signal+(high),pin3assignal(low),and pin1ascommon/shield.Withanunbalancedsourceconnectsignal+(high)tothe pin2andsignal(low/shield)tobothpins 1and3.
Issue1,August2014 Page6
Model5204UserGuide StudioTechnologies,Inc.
Model 5204 Dual Line Input to Dante Interface
USBDedicatedChargingPort
AUSBtypeAreceptacleislocatedonthe backpaneloftheModel5204.Itallows connectiontoawidevarietyofdevicesthat obtainpowerforoperationand/orcharging viaUSB.Nodataistransferredtoorfrom theModel5204withthisconnector,only powerisprovided.Thededicatedchargingport(DCP)iscapableofautomatically enumerating("handshaking")withanumberofthepopulardeviceprotocols.This allowsoperationwithmostmobilephones, tabletcomputers,andpersonalaudiodevices.Usingtheappropriatecable,simply connectthededicatedchargingporttothe selecteddevice.Upto5wattsofenergy canbedeliveredonacontinuousbasis. It'spossiblethatthedevicebeingpoweredand/orchargedisalsoservingasthe sourceofanalogaudioforlineinputA.In thiscasetwointerfacecableswillbeused tolinkthedevicewiththeModel5204.
Dante Configuration
SeveralModel5204'sDante-related parameterscanbeconfigured.These configurationsettingswillbestoredinnonvolatilememorywithintheModel5204's circuitry.Configurationwilltypicallybe donewiththeDanteControllersoftware applicationwhichisavailablefordownload freeofchargeatwww.audinate.com.VersionsofDanteControllerareavailableto supportWindows®andOSX®operating systems.TheModel5204usestheUltimo 2-input/2-outputintegratedcircuittoimplementtheDantearchitecture.However,only thetwotransmitter(output)channelsare utilized.Thisdictateswhichparameters
canbeconfiguredandwhatchoicesare available.
Thetwotransmitterchannelsassociated withtheModel5204'sDanteinterface mustbeassignedtothedesiredreceiver channels.WithinDanteControllera"subscription"isthetermusedforroutinga transmitflow(agroupofoutputchannels) toareceiveflow(agroupofinputchannels).Notethatasofthewritingofthis guidethenumberoftransmitterflows associatedwithanUltimointegratedcircuit islimitedtotwo.
TheModel5204willsupportaudiosample ratesof44.1,48,88.2,and96kHzwith alimitedselectionofpull-up/pull-down values.TheModel5204canserveasthe clockmasterforaDantenetworkbutin mostcasesitwill"sync"toanotherdevice.
TheModel5204hasadefaultDantedevicenameofST-M5204andauniquesuffix.ThesuffixidentifiesthespecificModel 5204thatisbeingconfigured(itrelatesto theMACaddressoftheUltimointegrated circuit).ThetwoDantetransmitterchannelshavedefaultnamesofCh1andCh2. UsingDanteControllerthedefaultdevice andchannelnamescanberevisedasappropriateforthespecificapplication.
Operation
AtthispointanEthernetconnectionwith Power-over-Ethernet(PoE)capability shouldhavebeenmade.Theunit'sDante configurationsettingsshouldhavebeen selectedusingDanteControllersoftware application.AtaminimumtheModel 5204'stwoDantetransmitterchannels shouldhavebeenroutedtoreceiver channelsonanassociateddevice.Analog
Model5204UserGuide StudioTechnologies,Inc.
Issue1,August2014 Page7
Model 5204 Dual Line Input to Dante Interface
signalsourceconnectionstolineinputA andlineinputBshouldhavebeenmade asdesired.AdevicemayhavebeenconnectedtotheUSBdedicatedcharging port.NormaloperationoftheModel5204 cannowbegin.
InitialOperation
TheModel5204willimmediatelybeginto functionassoonasaPower-over-Ethernet (PoE)powersourceisconnected.Atthis timetheUSBdedicatedchargingportwill becomefunctional.However,fulloperation maytakeupto20secondstobegin.Upon initialpowerupthefourstatusLEDslocatedonthebackpanelwillbegintolight.The meterLEDsonthefrontpanelwilllightina testsequence.AfterthemeterLEDscompletetheirtestsequenceonemeterLED associatedwithchannel1andonemeter LEDassociatedwithchannel2willbriefly lighttoindicatetheversionnumberofthe unit'sfirmware(embeddedsoftware).Once thatsequencehascompletedandthe Danteconnectionhasbeenestablished fulloperationwillbegin.
Ethernet,PoE,andDante StatusLEDs
FourstatusLEDsarelocatedbelowthe EthernetconnectorontheModel5204's backpanel.ThePoELEDwilllightgreen toindicatethatPower-over-Ethernet(PoE) associatedwiththeconnectedEthernet signalisprovidingoperatingpowerforthe Model5204.TheLINK/ACTLEDwilllight greenwheneveranactiveconnectionto a100Mb/sEthernetnetworkhasbeen established.Itwillflashinresponsetodata packetactivity.TheSYSandSYNCLEDs displaytheoperatingstatusoftheDante
interfaceandassociatednetwork.The SYSLEDwilllightreduponModel5204 poweruptoindicatethattheDanteinterfaceisnotready.Afterashortintervalit willlightgreentoindicatethatitisreadyto passdatawithanotherDantedevice.The SYNCLEDwilllightredwhentheModel 5204isnotsynchronizedwithaDante network.Itwilllightsolidgreenwhenthe Model5204issynchronizedwithaDante networkandanexternalclocksource (timingreference)isbeingreceived.Itwill slowlyflashgreenwhentheModel5204is partofaDantenetworkandisservingas aclockmaster.
HowtoIdentifyaSpecific Model5204
TheDanteControllersoftwareapplication offersanidentifycommandthatcanbe usedtohelplocateaspecificModel5204. Whenidentifyisselectedforaspecificunit theSYSandSYNCLEDsonthatunitwill slowlyflashgreen.
LevelMeters
Two7-stepLEDmeterswilldisplaythe levelofthetwoDantetransmitter(output) channels.Themeterstepsarecalibrated indBFSwhichindicatesthenumberofdB belowthemaximumpossibledigitalsignal level.Themaximumlevelis0dBFSwhich occurswhenthedigitalaudiodataisall "1"s.Intypicalapplicationsasignallevel of20dBFSwouldbethedesirednominal(normalaverage)value.Thefivemeter stepsthathaveathresholdof20dBFS andlesslightwiththecolorgreen.The stepthatlightsat15dBFSandgreater isyellowincolorandindicatesa"hot"or aboveaveragesignallevel.Thetopstep
Issue1,August2014 Page8
Model5204UserGuide StudioTechnologies,Inc.
Model 5204 Dual Line Input to Dante Interface
lightsredincolorwhenasignallevelsis 5dBFSorgreater,indicatingthatapotentially"clipped"(distortedduetoexcessive level)signalispresent.
InputA
Thesignalconnectedtothetip(leftchannel)connectionoflineinputA's3.5mm jackisassociatedwithDantetransmitter (output)channel1.Thering(rightchannel) connectionofthe3.5mmjackisassociated withDantetransmitterchannel2.Thepushin/push-outrotarycontroladjuststheinput levelofbothchannelsoflineinputA.Inits fullycounterclockwisepositiontheinput signalareessentiallyoff(muted).Adjust thecontrolsuchthatnormalinputsignals willcausethefivegreenLEDstolight. PeaksignalscancausetheyellowLED tolightonoccasion.ButtheyellowLED shouldneverbecontinuouslylit.Thered LEDshouldneverlight,exceptpossiblyin thecaseofanextremepeak.TheredLED lightingonaregularbasisindicatesthat thesignallevelisatriskofreachingdigital 0(0dBFS)whichisdestructivetoaudio quality.
InputB
ThesignalconnectedtolineinputB's channel13-pinfemaleXLRconnectoris associatedwithDantetransmitter(output) channel1.Thesignalconnectedtoline inputB'schannel2XLRconnectorisassociatedwithDantetransmitter(output)channel2.Thepush-in/push-outrotarycontrol adjuststheinputlevelofbothchannelsof lineinputB.Initsfullycounterclockwise positiontheinputsignalsareessentiallyoff (muted).Adjustthecontrolsuchthatnormal inputsignalswillcausethefivegreenLEDs tolight.Peaksignalscancausetheyellow
LEDtolightonoccasion.Buttheyellow LEDshouldneverbecontinuouslylit.The redLEDshouldneverlight,exceptpossibly inthecaseofanextremepeak.Thered LEDlightingonaregularbasisindicatesthat thesignallevelisatriskofreachingdigital 0(0dBFS)whichisdestructivetoaudio quality.
LineInputsA&BCombine
It'simportanttohighlightthattheModel 5204'stwo2-channellineinputs(AandB) combineintheanalogdomain.Ineffect theModel5204isadual-input2-channel (stereo)mixerandDanteconverter.Asignalpresentonchannel1(left)oflineinput Aandasignalpresentonchannel1ofline inputBwillcombine(mixtogetherorsum) after("post")thetwolevelcontrols.This combinedsignalisroutedtotheanalogto-digitalconvertercircuitryandontothe Dantetransmitter(output)forchannel1. Asignalpresentonchannel2(right)ofline inputAandasignalpresentonchannel2 oflineinputBwillcombine(mixtogether orsum)after("post")thetwolevelcontrols. Thiscombinedsignalisroutedtotheanalog-to-digitalconvertercircuitryandonto theDantetransmitter(output)forchannel 2.Butnotethatnomonauralversionofthe inputsignalsiscreated.
USBDedicatedChargingPort
Therearenospecialinstructionswhenusing thededicatedchargingport.Simplyconnect thedesireddeviceandthefunctionwilltypicallyautomaticallystart.Theonlylimitations willbewiththeport's5volt,1ampere(5 watt)maximumpowersupplycapability. Aconnecteddevicethatrequiresmore energyforoperationmaynotenumerate (handshakeornegotiate)successfully.No damagewilloccurinthiscase.
Model5204UserGuide StudioTechnologies,Inc.
Issue1,August2014 Page9
Model 5204 Dual Line Input to Dante Interface
TherearenoLEDsorperformanceindicatorsorconfigurationsettingsassociated withthededicatedchargingport.It'sreally justa"plug-inandgo"feature.
TechnicalNotes
UltimoFirmwareUpdate
TheModel5204implementsDanteconnectivityusingtheUltimointegratedcircuit fromAudinate.This2-input/2-outputdevicecanbeupdatedbywayoftheModel 5204'sEthernetconnection.Asofthedate ofwritingthisguideit'snotevidentasto whetherornotnewerfirmwarewillever needtobeloaded.
IdentifyingtheFirmware VersionNumber
Aspreviouslydiscussedinthisguide, uponpowerupthemeterLEDsareused tobrieflydisplaytheversionnumberof theModel5204'sfirmware(embedded software).Thisinformationistypicallyonly necessarywhenworkingwiththefactoryonsupportissues.ThemeterLEDs willfirstgothroughadisplaysequence followedbyanapproximately1-second periodwheretheversionnumberwillbe indicated.ThetoprowofsevenLEDswill displaythemajorversionnumberwitha rangeof1to7.Thebottomrowofseven LEDswilldisplaytheminorversionnumber witharangeof1to7.RefertoFigure2for details.
MajorVersionNumber
1 2 3 4 5 6 7 O O O O O O O O O O O O
.1 .2 .3 .4 .5 .6 .7
MinorVersionNumber
Figure2.DetailoffrontpanelshowingtheLEDsthatdisplaythefirmwareversion. Inthisexample,theversionshownis1.1.
Issue1,August2014 Page10
Model5204UserGuide StudioTechnologies,Inc.
Model 5204 Dual Line Input to Dante Interface
Specifications
NetworkAudioTechnology: Type:DanteAudio-over-Ethernet BitDepth:upto24 SampleRates:44.1,48,88.2,and96kHz
NetworkInterface: Type:twisted-pairEthernetwithPower-over- Ethernet(PoE) DataRate:100Mb/s(10Mb/sEthernetnot supported)
Power:Power-over-Ethernet(PoE)perIEEE802.3af class3(midpower,12.95watts)
GeneralAudioParameters: FrequencyResponse:20Hzto20kHz,±0.5dB, lineinputBtoDante Distortion(THD+N):0.01%,measuredat1kHz, +4dBu,lineinputBtoDante DynamicRange:>100dB,A-weighted,lineinputB toDante
LineInputA: Type:2-channel("stereo")unbalanced,capacitor- coupled InputImpedance:10kohms NominalLevel:adjustableusingrotarylevelcontrol, 3dBu@100%rotation MaximumLevel:+10dBu
LineInputB: Type:2-channel("stereo")electronicallybalanced, capacitor-coupled InputImpedance:20kohms NominalLevel:adjustableusingrotarylevel control,+11dBu@100%rotation MaximumLevel:+24dBu
Meters:2 Function:displayslevelofDanteoutputsignals Type:7-segmentLED,modifiedVUballistics
DedicatedChargingPort: Function:poweringandchargingofconnected devices;nodatainterface Output(Nominal):5voltsDC,1amp(5watts) Compatibility:auto-detectsupportsdividermode, shortmode,and1.2V/1.2Vchargingmodes
Connectors: Ethernet:NeutriketherCONRJ45 LineInputA:3-conductor("stereo")3.5mmjack LineInputB:2,3-pinfemaleXLR DedicatedChargingPort:USBtypeAreceptacle
Dimensions(Overall): 4.2incheswide(10.7cm) 1.7incheshigh(4.3cm) 5.1inchesdeep(13.0cm)
MountingOption:bracketkit
Weight:0.8pounds(0.35kg)
Specifications subject to change without notice.
Model5204UserGuide StudioTechnologies,Inc.
Issue1,August2014 Page11