HOME
Hikvision - Leading the future of AIoT
User Manual for HIKVISION models including: HIKVISION, DS-PDTPH-E-WE, DS-PDTPH-E-WB, Wireless, Temperature, Detector
©2020 Hangzhou Hikvision Digital Technology Co., Ltd. All rights reserved. About this Manual. The Manual includes instructions for using and managing the ...
File Info : application/pdf, 4 Pages, 2.57MB
DocumentDocumentDS-PDTPH-E-WE/WB Wireless Temperature Detector ©2020 Hangzhou Hikvision Digital Technology Co., Ltd. All rights reserved. About this Manual The Manual includes instructions for using and managing the Product. Pictures, charts, images and all other information hereinafter are for description and explanation only. The information contained in the Manual is subject to change, without notice, due to firmware updates or other reasons. Please find the latest version of this Manual at the Hikvision website (https://www.hikvision.com/). Please use this Manual with the guidance and assistance of professionals trained in supporting the Product. and other Hikvision's trademarks and logos are the properties of Hikvision in various jurisdictions. Other trademarks and logos mentioned are the properties of their respective owners. Disclaimer TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, THIS MANUAL AND THE PRODUCT DESCRIBED, WITH ITS HARDWARE, SOFTWARE AND FIRMWARE, ARE PROVIDED "AS IS" AND "WITH ALL FAULTS AND ERRORS". HIKVISION MAKES NO WARRANTIES, EXPRESS OR IMPLIED, INCLUDING WITHOUT LIMITATION, MERCHANTABILITY, SATISFACTORY QUALITY, OR FITNESS FOR A PARTICULAR PURPOSE. THE USE OF THE PRODUCT BY YOU IS AT YOUR OWN RISK. IN NO EVENT WILL HIKVISION BE LIABLE TO YOU FOR ANY SPECIAL, CONSEQUENTIAL, INCIDENTAL, OR INDIRECT DAMAGES, INCLUDING, AMONG OTHERS, DAMAGES FOR LOSS OF BUSINESS PROFITS, BUSINESS INTERRUPTION, OR LOSS OF DATA, CORRUPTION OF SYSTEMS, OR LOSS OF DOCUMENTATION, WHETHER BASED ON BREACH OF CONTRACT, TORT (INCLUDING NEGLIGENCE), PRODUCT LIABILITY, OR OTHERWISE, IN CONNECTION WITH THE USE OF THE PRODUCT, EVEN IF HIKVISION HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES OR LOSS. YOU ACKNOWLEDGE THAT THE NATURE OF INTERNET PROVIDES FOR INHERENT SECURITY RISKS, AND HIKVISION SHALL NOT TAKE ANY RESPONSIBILITIES FOR ABNORMAL OPERATION, PRIVACY LEAKAGE OR OTHER DAMAGES RESULTING FROM CYBER-ATTACK, HACKER ATTACK, VIRUS INSPECTION, OR OTHER INTERNET SECURITY RISKS; HOWEVER, HIKVISION WILL PROVIDE TIMELY TECHNICAL SUPPORT IF REQUIRED. YOU AGREE TO USE THIS PRODUCT IN COMPLIANCE WITH ALL APPLICABLE LAWS, AND YOU ARE SOLELY RESPONSIBLE FOR ENSURING THAT YOUR USE CONFORMS TO THE APPLICABLE LAW. ESPECIALLY, YOU ARE RESPONSIBLE, FOR USING THIS PRODUCT IN A MANNER THAT DOES NOT INFRINGE ON THE RIGHTS OF THIRD PARTIES, INCLUDING WITHOUT LIMITATION, RIGHTS OF PUBLICITY, INTELLECTUAL PROPERTY RIGHTS, OR DATA PROTECTION AND OTHER PRIVACY RIGHTS. YOU SHALL NOT USE THIS PRODUCT FOR ANY PROHIBITED END-USES, INCLUDING THE DEVELOPMENT OR PRODUCTION OF WEAPONS OF MASS DESTRUCTION, THE DEVELOPMENT OR PRODUCTION OF CHEMICAL OR BIOLOGICAL WEAPONS, ANY ACTIVITIES IN THE CONTEXT RELATED TO ANY NUCLEAR EXPLOSIVE OR UNSAFE NUCLEAR FUEL-CYCLE, OR IN SUPPORT OF HUMAN RIGHTS ABUSES. IN THE EVENT OF ANY CONFLICTS BETWEEN THIS MANUAL AND THE APPLICABLE LAW, THE LATER PREVAILS. This product and - if applicable - the supplied accessories too are marked with "CE" and comply therefore with the applicable harmonized European standards listed under the EMC Directive 2014/30/EU, RE Directive 2014/53/EU, the RoHS Directive 2011/65/EU. 2012/19/EU (WEEE directive): Products marked with this symbol cannot be disposed of as unsorted municipal waste in the European Union. For proper recycling, return this product to your local supplier upon the purchase of equivalent new equipment, or dispose of it at designated collection points. For more information see: www.recyclethis.info rscereeeauxndlapsfpteveutilblaisiagorlnpvatocusgioteininatnosmoemrgandarfelaeynao(onnfbsrefbottuatxaarotbthphttfebjeteleaxeaoarctlarsytebtymtcieaoe,aiankdpnttrnathylaeteogaonir,erntyieettcnoowhxxaftttenfiirhrflteerlheraeemmemaacsoekeanumralsllyyitegaanelhibcoohniolowfogearfhstrnlaofleiotqimecaevrutxmempeiptdnrmyplle,oipoetsoasherrsrbiaiougutlmtenarhumes;aerlitetcqbhhcuasaaautitdntnremriodcroyareaulyfgtnleyyardapescit;ensrauausg)nsl;thdiinnganor 2006/66/EC (battery directive): This product contains a battery that cannot be disposed of as unsorted municipal waste in the European Union. See the product documentation for specific battery information. The battery is marked with this symbol, which may include lettering to indicate cadmium (Cd), lead (Pb), or mercury (Hg). For proper recycling, return the battery to your supplier or to a designated collection point. For more information see:www.recyclethis.info Warning Caution 1. Do not ingest battery, Chemical Burn Hazard 2. Keep new and used batteries away from the children. 3. If the battery compartment does not close securetyly, stop using the product and keep it away from children. 4. This product contains a coin / button cell battery. If the coin / button cell battery is swallowed, it can cause severe internal burns in just 2 hours and lead to death. 5. If you think batteries might have been swallowed or placed inside any part of the body, seek immediate medical attention. 1. Risk of fire or explosion if the battery is replaced by an incorrect type. 2. Improper replacement of the battery with an incorrect type may defeat a safeguard (for example, in the case of some lithium battery types). 3. Do not dispose of the battery into fire or a hot oven, or mechanically crush or cut the battery, which may result in an explosion. 4. Do not leave the battery in an extremely high temperature surrounding environment, which may result in an explosion or the leakage of flammable liquid or gas. 5. Do not subject the battery to extremely low air pressure, which may result in an explosion or the leakage of flammable liquid or gas. 6. Dispose of used batteries according to the instructions 1 Appearance Battery Screen Indicator Tamper Alarm Enrollment Signal Battery Temperature Alarm Probe Interface Tamper Button Power Switch Battery + - Mark + identifies the positive terminal(s) of equipment which is used with, or generates direct current. - identifies the negative terminal(s) of equipment which is used with, or generates direct current. 1 Hangzhou Hikvision Digital Technology CO.,Ltd. No.555 Qianmo Road, Binjiang District, Hangzhou 310052, China 2 Enrollment 1. Download and install the App from the APP Store. 2. Power on the security control panel. 3. Log in the APP and tap the icon "+" . Scan the QR code or input the control panel serial No. to add the control panel. 1 Enroll the Peripheral Locally 1. In the APP, tap the "Enrollment Mode" button on the control panel page to make the control panel enter the enrollment status. 2. Remove the rear panel. 3. Power on the peripheral, and it will be automatically enrolled to the control panel. 2 Enroll the Peripheral with QR and serial No. 1. In the APP, tap the icon "+"and scan the QR code or serial No. on the peripheral. 2. Remove the rear panel. 3. Power on the peripheral, and it will be automatically enrolled to the control panel. xxxx Device 3 Installation 1. Check Signal Strength Enter the signal checking mode by operating on the control panel. Strong Signal - Good for installation Medium Signal - Ok for installation Weak Signal - Not proper for installation Lost Signal - Not proper for installation Signal Strength Test 2 Hangzhou Hikvision Digital Technology CO.,Ltd. No.555 Qianmo Road, Binjiang District, Hangzhou 310052, China 2. Connect the probe cable. ...... Note: The humidity detection will be disabled when using probe. 3. Install the Detector. Secure the mounting plate on the wall with supplied screws or sponge tape. b Screw Mounting 4 Application Sponge tape mounting Standalone Work Work with Probe 5 Formatting Hold the TAMPER button and power the detector on at the same time. The signal indicator will be dim out when the formatting is completed. 6 Set Up with App You can view the device status including temperature, signal intensity, battery level, lid, etc.,on the device page. Tap the button to enter the settings page. 3 Hangzhou Hikvision Digital Technology CO.,Ltd. No.555 Qianmo Road, Binjiang District, Hangzhou 310052, China ...... 7 Operation Caution and Device Maintenance - All the electronic operation should be strictly compliance with the electrical safety regulations, fire prevention regulations and other related regulations in your local region. - Do not drop the device or subject it to physical shock, and do not expose it to high electromagnetism radiation. Avoid the equipment installation on vibrations surface or places subject to shock (ignorance can cause equipment damage). - Please make sure that the power has been disconnected before you wire, install or dismantle the device. - If smoke, odors or noise rise from the device, turn off the power at once and unplug the power cable, and then please contact the service center. - Do not drop the device or subject it to physical shock, and do not expose it to high electromagnetism radiation. Avoid the equipment installation on vibrations surface or places subject to shock (ignorance can cause equipment damage). - Do not place the device in extremely hot (refer to the specification of the device for the detailed operation temperature), cold, dusty or damp locations, and do not expose it to high electromagnetic radiation. - The device for indoor use shall be kept from rain and moisture. Exposing the equipment to direct sun light, low ventilation or heat source such as heater or radiator is forbidden (ignorance can cause fire danger). - Do not aim the device at the sun or extra bright places. A blooming or smear may occur otherwise (which is not a malfunction however), and affecting the endurance of sensor at the same time. - Improper use or replacement of the battery may result in hazard of explosion. Replace with the same or equivalent type only. Dispose of used batteries according to the instructions provided by the battery manufacturer. - Do not expose the device to the corrosive gas. Otherwise the equipment damage may occur. - Do not expose the device to the explosive situation. 8 Specification Detection Method Detection Range Digital Processing Tamper Protection Signal Strength Indicator Power Switch Indicator Screen Size Transmission Technology Transmission Method Transmission Frequency Transmission Security Frequency Hopping Enrolling Method Power Supply Battery Type Typical Voltage Standard Battery Life Operation Temperature Storage Temperature Operation Humidity Dimension(WxHxD) Weight Accessory Temperature Sensor -10 °C to 55 °Cstandalone -35 °C to 99 °Cwith probe Support Front,Rear Support Power Up Enrolling On Screen Display 53 x 53 mm Tri-X Wireless Two-Way RF Wireless 868 MHz /433 MHz AES-128 Encryption Support Power up,Remote ID,QR Code Battery Powered AAA × 2 3V 2 Years -10 °C to 55 °C (14 °F to 131 °F) -20 °C to 60 °C (-4 °F to 140 °F) 10% to 90% 62.6mm × 62.6mm × 18mm 73.5 g Extension Probe 4 Hangzhou Hikvision Digital Technology CO.,Ltd. No.555 Qianmo Road, Binjiang District, Hangzhou 310052, China