MOES ZigBee 006 Series Thermostat
User Manual for Water Heating/Boiler/Electric Heating Systems.
Thank you for purchasing MOES products. Please read the following terms before installation and use.
Confirm product suitability for your heating equipment before installation. Ensure power is off before installation or maintenance. Strictly follow the wiring diagram. Use appropriate fasteners for wall installation. Do not pull cables too hard. Bend hard plastic wires to an appropriate angle in advance. Professional installation is recommended. Contact after-sales service for equipment failure; do not attempt self-repair. Keep this manual for future reference.
About Your Thermostats
The 006 range is developed to control electric underfloor, water heating, or water/gas boiler systems. These units are designed for use in commercial, industrial, civil, and domestic properties.
Features
On Appearance
- LED display for a friendly interface.
- Touch operation buttons for smoother interaction.
- Ultra-thin embedded panel fits seamlessly on walls.
- Borderless small rounded corner design for a simple and atmospheric look.
- Compatible with standard 86mm square and 60mm European cassettes for versatile installation.
On Functionality
- Rich function options including Modbus, WIFI, and keycard.
- Strict temperature control accuracy (±1°C) for desired warmth.
- Power off protection to safely save all settings.
- Provides weather information and humidity display.
- Preset 5+1+1 mode weekly, with 6 programmable time periods daily for energy saving and cost reduction.
- Supports creation of local product groups/shares for unlimited centralized control and multi-terminal control.
- Seamless integration with Tmall Genie, Amazon Echo, and Google Home for voice control.
Technical Data
| Parameter | Value |
|---|---|
| Power Supply | 95~240 VAC, 50~60 Hz |
| Current Load | 5A (water heating, gas boiler), 16A (electric heating) |
| Sensor | NTC3950, 10K |
| Accuracy | ±1°C |
| Set Temp. Range | 5-35°C |
| Room Temp. Range | 5-99°C |
| Display Temp. Range | 5~99°C |
| Ambient Temp. | 0~45°C |
| Ambient Humidity | 5~95% RH (Non Condensing) |
| Storage Temp. | -10~45°C |
| Power Consumption | <1.5W |
| Timing Error | <1% |
| Shell Material | PC+ABS (Fireproof) |
| Installation Box | 86*86mm Square or European 60mm Round Box |
| Wire Terminals | Wire 2x1.5mm² or 1x2.5mm² |
| Protection Class | IP20 |
| Buttons | Capacitive Touch Buttons |
Wiring
Note: GA is for water heating; GB is for electric heating; GC is for water/gas boiler; NTC and Modbus are optional.
The wiring diagram shows terminal connections for AC power (N, L), load connections, and optional NTC/Modbus ports for GA, GB, and GC configurations.
Installation
Your thermostat is suitable for installation within a standard 86mm pattress box or European 60mm pattress box.
Steps:
- Step 1: Ensure the power is off. [See Fig 1]
- Step 2: Remove the mounting plate by pushing the LED assembly. [See Fig 2]
- Step 3: Connect the power supply and load to the appropriate terminals. [Refer to Wiring section and Fig 3]
- Step 4: Secure the mounting plate to the wall using the provided screws. [See Fig 4]
- Step 5: Attach the thermostat body to the mounting plate using the lower button. [See Fig 5]
- Step 6: Installation is complete. [See Fig 6]
Operation
Home Screen Quick Reference
Note: In the power-on state, press the [up/down arrows] to display humidity and set temperature.
- [Power Symbol]: Press to turn the thermostat on/off.
- [Mode Symbol]: Touch to switch between manual and programmable modes. Manual mode displays [Manual Icon], programmable mode displays [Program Icon].
- [Temperature Adjustment Symbol]: Press to set the desired temperature in manual mode. Temperature and time settings are locked in programming mode.
- [Clock Symbol]: Press to set minute, hour, and weekday. Use the [up/down arrows] to adjust. Press again to confirm and exit.
- [Lock Symbol]: Press and hold for 5 seconds to lock/unlock the thermostat.
- [Wifi Symbol]: For Wi-Fi connection status.
- [RH Symbol]: Displays humidity percentage.
- [Heating On Symbol]: Indicates heating is active.
- [Underfloor Heating On Symbol]: Indicates underfloor heating is active.
- [Energysaving Symbol]: Indicates energy-saving mode.
- [Sleep Mode Symbol]: Indicates sleep mode.
Operation Details
During Power On:
- Power On/off: Press the [power symbol] to turn the thermostat on/off.
- Function & Programmable: Touch the [mode symbol] to switch between manual and programmable modes. Manual mode shows [manual icon], programmable mode shows [program icon].
- Setting Temperature: In programming mode, temperature and time settings are locked. Switch to manual mode by pressing the [mode symbol] to adjust. In manual mode, use the [up/down arrows] to set the desired temperature.
- Adjusting/Setting the Clock: Press the [clock symbol] to set minute, hour, and weekday. Use the [up/down arrows] to adjust. Press again to confirm and exit.
- Locking your Thermostat: Press and hold the [lock symbol] for 5 seconds to lock/unlock. Full or half lock can be selected in advanced options (item 3).
- Adjusting/setting the Program Schedules:
- When Wi-Fi is connected, schedules are accepted from the app. The thermostat may need to be turned off once after app schedule changes.
- If no Wi-Fi connection, set schedules manually: Press the [program schedule symbol] four times. Minutes will flash; use [up/down arrows] to set. Press again for hour, use arrows to set. Press again for temperature, use arrows to set. This completes period 1. Repeat for periods 2, 3, 4, and 5. Press the symbol again to enter Saturday settings, then Sunday settings. Press again to confirm and exit.
- Checking the Temperature of Floor Sensor: Press and hold the [down arrow] for 5 seconds to display the floor sensor temperature.
Preparation for Use
1. Download MOES App
The MOES App offers enhanced compatibility over Tuya Smart/Smart Life App, with features for Siri control, widgets, and scene recommendations. (Note: Tuya Smart/Smart Life App still works, but MOES App is highly recommended).
Download from: [App Store Link], [Google Play Link]
2. Registration or Log in
Access the Register/Login interface. Tap "Register" to create an account using your phone number and set a password. Log in if you have an existing MOES account.
Description of app registration/login screenshots.
3. ZigBee Gateway Connection
Ensure the device is within the effective signal coverage of your smart ZigBee gateway for successful connection into the ZigBee gateway in MOES APP.
Method One:
Scan the QR code to configure the network guide. Ensure your MOES APP is connected to a Zigbee gateway. Enter the gateway and follow the steps: "Add subdevice → LED already blink". Connection takes 10-120 seconds.
Description of app screenshots for adding a subdevice.
Method Two:
Reset the thermostat: When off, press and hold the [power symbol] until the screen flashes and displays the [reset symbol]. Follow the figure.
Description of app screenshots for adding a device.
Setting the Functions and Options
To access system functions, press and hold [button 1] and [button 2] for 8 seconds while the thermostat is off. Use [button 88] to scroll and [arrows] to change options. Settings are confirmed automatically.
| Code | Function | Setting and options | Default |
|---|---|---|---|
| 1 | Temperature compensation | -9 to 9 °C | -3 |
| 2 | Deadzone Temperature | 1-5°C | 1 |
| 3 | Button Locking | 01: All buttons locked except power button. 00: All buttons locked. | 01 |
| 4 | Sensor type | In: Internal Sensor (for temp. control). Ou: External Sensor (for temp. control). AL: Internal/External Sensor (Internal sensor for temp. control, external sensor for temp. limit). | AL |
| 5 | Min. Set Temp. | 5-15°C | 05 |
| 6 | Max. Set Temp. | 15-45°C | 35 |
| 7 | Temp. display | 00: Display set Temp. and Room Temp. 01: Only display set Temp. | 00 |
| 8 | Low temp. protection setting. | 0-10°C | 00 |
| 9 | High temp. protection setting. | 45-70°C | 45 |
| A | Daytime display brightness (6:00-22:00) | 0-8 | 1 |
| B | Brightness at night (22:00-6:00) | 0-8 | 1 |
| C | Reset | 00: No factory reset; 01: Factory reset. | 00 |
| D | Version number | U1 |
Service
MOES provides a two-year worry-free after-sales service (freight not included). Please do not alter the warranty service card. Contact the distributor or MOES for service or questions.
Warranty void if product appearance is damaged, LOGO is missing, service term is exceeded, products are disassembled, modified, or damaged by foreign matter.
Recycling Information
Products marked with the WEEE symbol must be disposed of separately from municipal waste. To protect health and the environment, dispose of this equipment at designated collection points for electrical and electronic equipment. Contact your local authority for details.
Warranty Card
Fields for Product Information (Name, Type, Purchase Date, Warranty Period), Dealer Information, Customer Details, and Maintenance Records are provided.
Contact Information
Follow MOES on social media: [Facebook Icon/Link], [Instagram Icon/Link], [Twitter Icon/Link], [Official Website Icon/Link].
UK REP: EVATOST CONSULTING LTD, Suite 11, First Floor, Moy Road Business Centre, Taffs Well, Cardiff, Wales, CF15 7QR, Tel: +44-292-1680945, Email: contact@evatmaster.com
EC REP: AMZLAB GmbH, Laubenhof 23, 45326 Essen
Manufacturer: WENZHOU NOVA NEW ENERGY CO.,LTD, Power Science and Technology Innovation Center, NO.238, Wei 11 Road, Yueqing Economic Development Zone, Yueqing, Zhejiang, China, Tel: +86-577-57186815, After-sale Service: service@moeshouse.com
