EU-Type Examination Certificate

Notified Body 1622 – Radio Equipment Directive 2014/53/EU

In compliance with Directive (EU) No 2014/53 of the European Parliament and of the Council of 16 April 2014 on the harmonisation of the laws of the Member States relating to the making available on the market of radio equipment (RED), this certificate applies to the product(s)

Product: Two-way Radio

Model: BF-88ST, PM-88ST, PF-88ST

Placed on the market under the name or trade mark of:

PO FUNG ELECTRONIC(HK) INTERNATIOANL GROUP COMPANY

3/F FULOK BLDG 131-133 WING LOK ST SHEUNG WAN, Hong Kong

Assessment and Verification of Performance

This certificate attest that all provisions concerning the assessment and verification of performance described in the standard(s):

• Art. 3.1a): EN 62368-1:2014+A11:2017, EN 50566:2017, EN 62209-2:2010/A1:2019
• Art. 3.1b): ETSI EN 301 489-1 V2.2.3, ETSI EN 301 489-5 V2.2.1
• Art. 3.2): ETSI EN 300 296 V2.1.1

as per Annex III (Module B) for the performance set out in this certificate, are applied.

This certificate was first issued on March 22, 2021

Certificate revision: 1.0

This certificate consists of 3 pages

For NEMKO (Notified Body 1622)

Ottawa, Canada, on Mar 22, 2021

Authorized signatory:

Xu Jin, Senior Technical Assessor

PRODUCT DESCRIPTION

• Equipment type: PMR446 Walkie Talkie
• Model/type: BF-88ST, PM-88ST, PF-88ST
• Brand/trade name: BAOFENG, POFUNG
• Supply voltage: DC 3.7V
• Rated power: -
• Hardware version: BF-889-A21_V1.3
• Software version: 1.0.1

TECHNICAL CHARACTERISTICS

• Transmitter type: -
• Intended purpose: Land Mobile Service
• Frequency range: 446.00625-446.19375 MHz
• Transmit power: 0.5 Watts
• Modulation type: FM
• Number of channels: -
• Channel separation: 12.5 kHz
• Antenna type: Integral antenna
• Maximum antenna gain: -

MANUFACTURER

• Name: Fujian Baofeng Electronics Co., Ltd.
• Address: Changfu Industrial Zone, Xiamei, Nan'an, Quanzhou, Fujian, China

ADDITIONAL INFORMATION

None.

SCOPE OF EXAMINATION

• Protection of Health and Safety, according to Article 3(1)(a): Conform
• Standards: EN 62368-1:2014+A11:2017, EN 50566:2017, EN 62209-2:2010/A1:2019
• Electromagnetic Compatibility (EMC), according to Article 3(1)(b): Conform
• Standards: ETSI EN 301 489-1 V2.2.3, ETSI EN 301 489-5 V2.2.1
• Radio Spectrum Use, according to Article 3(2): Conform
• Standards: ETSI EN 300 296 V2.1.1
• Special Radio Features, according to Article 3(3)(a)-(f): N/A
• Standards: N/A

MARKING OF PRODUCT

The Manufacturer and Type Designation shall be applied to the product in a visible location. The equipment shall carry the CE marking of the European Union.

TYPE EXAMINATION DOCUMENTATION

Test report(s):

• EMC test report by Shenzhen Huatongwei International Inspection Co., Ltd. Test Report Number: CHTEW2103006401
• Radio test report by Shenzhen Huatongwei International Inspection Co., Ltd. Test Report Number: CHTEW21030064
• Safety test report by Shenzhen Huatongwei International Inspection Co., Ltd. Test Report Number: CHTSE21030080
• Health test report by Shenzhen Huatongwei International Inspection Co., Ltd. Test Report Number: CHTEW21030065

Additional documentation:

• RED technical file by PO FUNG ELECTRONIC(HK) INTERNATIOANL GROUP COMPANY

ADDITIONAL INFORMATION

None.