Temperature and Humidity Sensor Lite

What's in the Box

• Temperature and Humidity Sensor Lite [Sensor Icon]
• 3M adhesive tape [Adhesive Tape]
• AAA Batteries (included) [Battery Icon]
• User Guide [Document Icon]

Introduction

We are thrilled to introduce a new generation of Zigbee Temperature and Humidity Sensor, a new LCD-Free design to enhance your living space with seamless connectivity, energy efficiency, and precise environmental monitoring. Enjoy battery-powered convenience, reliable and efficient communication, ensuring a seamless integration into your smart home ecosystem.

Specifications

Setup

1. Make sure the device has power by inserting a new battery. Press and hold the reset button for 5 seconds until the LED turns red and then flashes in blue, indicating it enters pairing mode.
2. Follow the instructions of your Zigbee hub to pair the sensor. Note: If not successfully paired to the Zigbee hub within 3 min, the sensor will exit pairing mode. To enter pairing mode again, press the reset button until the LED turns red and release. The LED turns blue and flashes, indicating that it is in pairing mode.

Pairing with ThirdReality

App: Third Reality App

Device: ThirdReality Smart Hub

Pairing steps:

1. Register and sign in your ThirdReality account, set up your ThirdReality smart hub, make sure both the Third Reality app and the smart hub's firmware are in the latest version.
2. Push to open the back cover of the sensor and install the batteries.
3. Press the reset button until the LED turns red and release. The LED turns blue and flashes, indicating that it is in pairing mode. It will exit pairing mode after 3 min if not paired.
4. Tap "+" [Plus Symbol] in the upper right in the Third Reality App, follow the on-screen instructions to add device.

(Screenshots show the ThirdReality app interface for adding devices, including a '+' button and the 'Temperature & Humidity Sensor Lite' option.)

Pairing with 3R-Installer

App: 3R-Installer App

Device: Smart Bridge MZ1

Pairing steps:

1. Set up your smart bridge, make sure both the 3R-Installer App and the smart bridge's firmware are in the latest version.
2. Push to open the back cover of the sensor and install the batteries.
3. Press the reset button until the LED turns red and release. The LED turns blue and flashes, indicating that it is in pairing mode. It will exit pairing mode after 3 min if not paired.
4. Tap the smart bridge icon [Bridge Icon] to enter the devices page, tap "+ Bridge ZIGBEE Devices" [Add Icon] to start Zigbee pairing, follow the on-screen instructions to add device.
5. Tap "Link With Matter Enabled Services" [Link Icon], copy the Manual Setup Code or Scan the QR Code [QR Code] within 3 min, then you can add the bridge to other Matter supported ecosystems through multi-admin.

(Screenshots show the 3R-Installer app interface for adding devices, including QR code scanning and manual setup code entry.)

Pairing with Amazon Echo

App: Amazon Alexa

Devices: Echo speakers with built-in Zigbee hub, Echo 4th Gen, Echo Plus 1st & 2nd Gen, Echo Studio

Pairing steps:

Direct Pairing:

1. Ask Alexa to check for updates before pairing.
2. Install the batteries. Press the reset button until the LED turns red and release. The LED turns blue and flashes, indicating that it is in pairing mode. It will exit Zigbee pairing mode after 3 min if not paired.
3. Tap "+" [Plus Symbol] in the Alexa App, choose "Other" and "Zigbee" to add device, the Temperature and Humidity Sensor Lite will be added.
4. Create routines to control other connected devices.

(Screenshots show the Alexa app interface for adding devices, including selecting 'Other' and 'Zigbee', and a confirmation of the sensor being found and connected.)

Via Alexa Skill:

1. Ask Alexa to check for updates before pairing.
2. Install the batteries. Press the reset button until the LED turns red and release. The LED turns blue and flashes, indicating that it is in pairing mode. It will exit Zigbee pairing mode after 3 min if not paired.
3. Follow instructions "Pairing with ThirdReality".
4. Open your Alexa app, enable Third Reality skill in Skills & Games.
5. Devices paired in Third Reality app will be automatically added into Alexa.

Note: Humidity value is not exposed to Alexa. Temperature and Humidity Sensor Lite added through ThirdReality Skill cannot be used as triggers for Alexa routines.

Pairing with SmartThings

App: SmartThings App

Devices: SmartThings Hub 2nd Gen(2015) and 3rd Gen(2018), Aeotec Smart Home Hub.

Pairing steps:

1. Before pairing, check for updates to make sure the SmartThings Hub firmware is up to date.
2. Add SmartThings drivers for ThirdReality T & H Sensor Lite: Open this link in your PC browser. Log in your SmartThings Account. https://bestow-regional.api.smartthings.com/invite/adMKr50EXzj9 Click "Enroll" -- "Available Drivers" -- "Install" to install the device driver.
3. Install the batteries. Press the reset button until the LED turns red and release. The LED turns blue and flashes, indicating that it is in pairing mode. It will exit Zigbee pairing mode after 3 min if not paired.
4. Open the SmartThings App, tap "+" [Plus Symbol] on the upper right corner to "Add device" and then tap "Scan for nearby devices".
5. The Temperature and Humidity Sensor Lite will be paired with the SmartThings hub.
6. Create routines to control connected devices.

(Screenshots show the SmartThings app interface for adding drivers and devices, including scanning for nearby devices.)

Pairing with Hubitat

Website: http://find.hubitat.com/

Pairing steps:

1. Install the batteries. Press the reset button until the LED turns red and release. The LED turns blue and flashes, indicating that it is in pairing mode. It will exit Zigbee pairing mode after 3 min if not paired.
2. Tap "Add Device" in Hubitat Devices page.
3. Choose "Zigbee", then "Start Zigbee Pairing".
4. Type in a device and room name and click "Next" to complete pairing.

(Screenshots show the Hubitat interface for adding devices, selecting Zigbee, and configuring device details.)

Pairing With Home Assistant

Device: Zigbee dongle

Zigbee Home Automation

Pairing steps:

1. Install the batteries. Press the reset button until the LED turns red and release. The LED turns blue and flashes, indicating that it is in pairing mode. It will exit Zigbee pairing mode after 3 min if not paired.
2. Make sure Home Assistant Integrations Zigbee Home Automation Setup is ready, then go to "Configuration" page, click "integration".
3. Then click the "Devices" on the Zigbee item, then click "Add Devices".
4. After the pairing is completed successfully, it will show up in the page.
5. Back to "Devices" page, then you can find the device added.
6. Click to enter in the control interface to set the device.
7. Click "+" [Plus Symbol] belongs to Automation and then you can add different actions.

(Screenshots show the Home Assistant interface for setting up Zigbee integrations and adding devices.)

Zigbee2MQTT

Home Assistant Zigbee2MQTT

Pairing steps:

1. Install the batteries. Press the reset button until the LED turns red and release. The LED turns blue and flashes, indicating that it is in pairing mode. It will exit Zigbee pairing mode after 3 min if not paired.
2. Make sure Home Assistant Zigbee2MQTT Setup is ready.
3. Click "permit join (All)" [Permit Join Button] to add device.
4. Create automation and then you can add different actions.

(Screenshots show the Zigbee2MQTT interface within Home Assistant, including the 'Permit join (All)' button and a device list.)

FCC Regulatory Conformance

This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help important announcement.

NOTE: The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment. Such modifications could void the user's authority to operate the equipment.

RF Exposure

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator and your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

Limited Warranty

For limited warranty, please visit www.3reality.com/devicesupport.

For customer support, please contact us at info@3reality.com or visit www.3reality.com.

For help and troubleshooting related to Amazon Alexa, visit the Alexa app.

ISED Statement

English: This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) This device may not cause interference, and (2) This device must accept any interference, including interference that may cause undesired operation of the device. The digital apparatus complies with Canadian CAN ICES-3 (B)/NMB-3(B).

Radiation Exposure Statement

This equipment complies with Canada radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.