Help Center
User Manual for BLAUX models including: 30773 Motion Sensor Lights, 30773, Motion Sensor Lights, Sensor Lights, Lights
there is another light source, the Blaux Motion Sensor Lights will not switch on, even if movement is detected. 1 x Blaux Motion Sensor Light 1x Micro USB Cable 1x Magnetic sticker 1 x User Manual 1 .When plugged in, a red LED will glow When your lights are done charging, the LED will turn green. 2 Do NOT expose the lights to xtreme
File Info : application/pdf, 2 Pages, 139.07KB
DocumentDocumentUSER MANUAL Now, you and your loved ones can easily navigate your home and conserve energy. Kindly read this user manual carefully before using your new Motion Sensor Lights. Make sure to keep this document for future reference. The Blaux Rechargeable Motion Sensor Lights use built-in detectors and LEDs to effectively illuminate entryways, rooms, and even exterior areas. These lights can run for up to 11 hours on a single charge, giving you maximum efficiency. · Detection Distance: 10 to 26 feet (3 to 8 meters) · Detection Angle: 120° · Number of LED Beads: 10 · LED Life: More than 80,000 hours · LED Brightness: 1800 - 2000 MCD/piece · Luminous Angle: 120° · LED Color: Warm white · Standby Current: 39 mA · Operating Current: 70 mA · Power Supply: 350 mAh lithium battery · Auto Shutoff Time: 15 seconds · Product Size: 188 x 30 x 15 mm · Storage Temperature: 14 - 104 °F (10 - 40 °C) 1. To charge your Motion Sensor Lights, simply use the included Micro USB cable. Your lights will be able to run for up to 11 hours on a single charge. 2. Attach the magnetic tape onto the desired surface (e.g. near a doorway, inside your garage, along your exterior walls). Then, attach the Blaux Motion Sensor Lights to the magnetic tape. 3. The lights will automatically turn on when movement is detected within a 10-26 foot range. They will switch off 15 seconds after you leave the room or when no movement is detected. Note: The lights will only work if the area is dark. If there is another light source, the Blaux Motion Sensor Lights will not switch on, even if movement is detected. 1 x Blaux Motion Sensor Light 1x Micro USB Cable 1x Magnetic sticker 1 x User Manual 1. When plugged in, a red LED will glow. When your lights are done charging, the LED will turn green. 2. Do NOT expose the lights to extreme temperatures (below 14 °F or above 104 °F). 3. Do NOT expose your Blaux Motion Sensor Lights to overly damp conditions (ie. bathrooms) or immerse in water. Thank you for choosing Blaux! Have questions about our products? You can contact our helpful customer service team by going to support.blauxstore.com or by scanning the QR code below. We're always happy to help!