Installation Guide for ezcap models including: ezcap172, USB Video Capture, Video Capture, Capture
Download-ezcap - Video Streaming Capture Card
ezcap172 USB Video Capture-æ·±å³å¸é£äºç¿é¾ç§ææéå ¬å¸ æ¸¸æééç´æ è§é¢ééç´æ
ezcap172 USB Video Capture-ezcap - Video Streaming Capture Card
File Info : application/pdf, 7 Pages, 308.73KB
DocumentDocumentOverview USB Video Capture Quick Installation Guide You now have all the options you need for recording your favorite movies, TV shows, or life video from an analog video source onto your computer. And edit them, burn DVD disc, convert them, and send them to your iPod, PSP, or 3GP Mobile Phone. So you can watch them anywhere and anytime. Connection Guide If you use a scart interface, please connect equipment following below picture and set the switch to be OUTPUT Notice: 1, You maybe have to buy Video and Audio cable, and S-Video cable to connect the USB Video Capture with your analog video device. You need to buy the Scart Video/Audio adapter if the output of your video source device is Scart type. 2, The following devices can be used as analog video sources: Video recorder, DVD player, Video camera, Set-top box, Game player and any device that provides an analog video signal. Download Link Driver and Arcsoft ShowBiz 3.5 software at the bottom of below link: http://www.ezcap.com/ezcap172 You can find the series number sticker of ShowBiz software on the Manual. For Simplified Chinese system, please use the following link: http://cn.ezcap.com/ezcap172 Hardware Installation Please download the driver firstly: http://www.ezcap.com/ezcap172, and double click Setup.exe to start to install drivers. Follow the Next prompts then click Finish to end the driver installation. Now, plug USB Video Capture into USB2.0 port of your computer. System will appear you Found the new hardware or others. Please wait for the installing automatic until the system appears you Device is now installed and ready to use. Click on the Sound, video and game controllers that in the Device Manager, you should see the ezcap Video Grabber, that means driver installed rightly. Software Installation Please download the ArcSoft ShowBiz software: http://www.ezcap.com/ezcap172, and double click Setup.exe to start to install ShowBiz software. Click Next and/or Finish buttons following the attention of installation program to complete the software installation. When asked to enter a Product Key, enter the code which can be found the software sticker on the manual. Software Guide 1, Double click ShowBiz 3.5. icon which on the Desktop of your computer to open it. And click Capture button to enter into the capture panel. 2, Click the drop-down box next to Source and select ezcap USB video capture, and click the tropdown box next to Audio Device and select Audio Pin Source. 3, Click the drop-down box next to Video Input and select Composite or S-Video according to the connection of device. 4, Click Video Settings to select the right TV system of your video source, such as NTSC-M, PAL-B, or others. Now, you should can see the right video on the software panel. 5, Click the RECORD BUTTON to start recording, and click again to stop recording. 6, To learn more about ShowBiz3.5, please click Option button and select Help to get the information. Ver: M17220240618 USB DVD iPodPSP 3GP 1// RCAS-VideoUSB 2 DVD Download Link Arcsoft ShowBiz 3.5 : http://cn.ezcap.com/ezcap172 Setup.exe USB USB ezcap Video Grabber Setup.exe 1, ShowBiz 3.5Capture 2, ezcap USB video capture, Audio Pin Source 3, Composite S-Video Composite S-VideoS-Video 4, NTSC-MPAL-B PAL NTSC 5, 6, Option