TP-Link VIGI Regulatory Compliance

FCC Compliance Information Statement

Product Name: Intelligent Solar Power Supply System/Solar System Controller

Model Number: VIGI SP9030/VIGI SP6030/VIGI SP6020/VIGI PS20/VIGI PS30/VIGI PS90

Responsible Party: TP-Link Systems Inc.

Address: 10 Mauchly, Irvine, CA 92618

Website: https://www.tp-link.com/us/

Tel: +1 626 333 0234

Fax: +1 909 527 6804

E-mail: sales.usa@tp-link.com

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/ TV technician for help.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

• 1) This device may not cause harmful interference.
• 2) This device must accept any interference received, including interference that may cause undesired operation.

Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

TP-Link Systems Inc. has determined that the equipment shown has been shown to comply with the applicable technical standards, FCC part 15. There is no unauthorized change made in the equipment and the equipment is properly maintained and operated.

Issue Date: 2024/08/30

Canadian Compliance Statement

This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada's licence-exempt RSS(s). Operation is subject to the following two conditions:

• (1) This device may not cause interference.
• (2) This device must accept any interference, including interference that may cause undesired operation of the device.

Industry Canada Statement

CAN ICES-3 (B)/NMB-3(B)

CE Mark Warning

This is a class B product. In a domestic environment, this product may cause radio interference, in which case the user may be required to take adequate measures.

TP-Link hereby declares that the device is in compliance with the essential requirements and other relevant provisions of directives 2014/30/EU, 2014/35/EU, 2011/65/EU and (EU)2015/863.

The original EU declaration of conformity may be found at https://www.tp-link.com/support/ce.

UKCA Mark

UK Declaration of Conformity

TP-Link hereby declares that the device is in compliance with the essential requirements and other relevant provisions of the Electromagnetic Compatibility Regulations 2016 and Electrical Equipment (Safety) Regulations 2016.

The original UK declaration of conformity may be found at https://www.tp-link.com/support/ukca/.

Ukrainian Compliance

Product certified according to UkrSEPRO system rules for compliance with normative documents and requirements stipulated by current legislative acts of Ukraine.

Safety Information

For VIGI PS20/VIGI PS30/VIGI PS90:

• [Do not disassemble] Do not attempt to disassemble, repair, or modify the device.
• [Damaged charger warning] Do not use damaged charger or USB cable to charge the device.
• [Incorrect charger warning] Do not use any other chargers than those recommended.
• [Adapter installation] Adapter shall be installed near the equipment and shall be easily accessible.
• [Use manufacturer's power supply] Use only power supplies which are provided by manufacturer and in the original packing of this product. If you have any questions, please don't hesitate to contact us.
• [Battery fire hazard] Avoid disposal of a battery into fire or a hot oven, or mechanically crushing or cutting of a battery, that can result in an explosion.
• [Bottom down placement] Place the device with its bottom surface downward. Install it at stable places, and prevent it from falling.
• [Keep away from heat] Keep the device away from fire or hot environments. DO NOT immerse in water or any other liquid.

This equipment is not suitable for use in locations where children are likely to be present, such as family environment, school, children's playground and so on.

Please read and follow the above safety information when operating the device. TP-Link cannot guarantee that no accidents or damage will occur due to improper use of the device. Please use this product with care and operate at your own risk.

Battery Cautions

CAUTION!

Avoid replacement of a battery with an incorrect type that can defeat a safeguard.

Avoid disposal of a battery into fire or a hot oven, or mechanically crushing or cutting of a battery, that can result in an explosion.

Do not leave a battery in an extremely high temperature surrounding environment that can result in an explosion or the leakage of flammable liquid or gas.

Do not leave a battery subjected to extremely low air pressure that may result in an explosion or the leakage of flammable liquid or gas.

For PS90:

CAUTION! [Fire/explosion risk] if the battery is replaced by an incorrect type.

Explanation of the Symbols on the Product Label

Note: The product label can be found at the bottom of the product and its I.T.E. power supply. Symbols may vary from products.