ITC Warranty & Return Policy
Installation Guide for ITC models including: 21060-001 Color Module, 21060-001 Color Module, Color Module
Index of /files/resources/
303 Corporate rove Dr. Hudsonville MI 9426 Pone: 16.396.155 itc-us.com PARTS / TOOLS NEEDED: RGB Fixed Color Module RGB Lighting (Varies) Double Stick Tape x 2
File Info : application/pdf, 1 Pages, 148.92KB
DocumentDocumentFixed Color Module Part#: 21060-XXX PARTS / TOOLS NEEDED: INSTALLATION INSTRUCTIONS RGB Fixed Color Module RGB Lighting (Varies) Double Stick Tape x 2 Butt Splices (not provided) Safety Instructions · Disconnect power before installing, adding or changing any component. · To avoid a hazard to children, account for all parts and destroy all packing materials. · Do not install any luminaire assembly closer than 6" from any combustible materials. · Positive (+) outputs require a fuse if the attached wire leads are not rated to handle the max current. Alcohol Wipes (not provided) 1. Determine the installation location for your color module. Make sure to consider the size of the module (3.2"L x 2"W x 0.8"H) when determining your location. Note, it will require room for access and for wiring. Once determined, clean the back of the module and the install location with alcohol wipes (not provided). Place the double stick pads (included) on the back of the module as shown below. Remove the paper and stick the module in place. · Do not mount in area where water can be splashed over unit. 3.2" 0.8" Double Stick Tape 2.0" Tape on bottom of controller 2. Follow the wiring diagram below to wire the module to your system. Inputs Red - Power (+) Black - Power (-) Color Module - 21060-XXX Color Module Output 1 (+) White/Red Red Green Blue Output 2 (+) White/Red Red Green Blue 12-24V DC / Max 12A 4A Max per RGB Wire 3030 Corporate Grove Dr. Hudsonville, MI 49426 Phone: 616.396.1355 itc-us.com For warranty information please visit www.itc-us.com/warranty-return-policy DOC #: 710-00015 · Rev A · 05/12/17 Page 1 of 1