DJI RC Pro Quick Start Guide

Disclaimer

Carefully read this entire document and all safe and lawful practices provided by DJI™ before using this product for the first time. Failure to read and follow instructions and warnings may result in serious injury to yourself or others, damage to your DJI product, or damage to other objects in the vicinity. By using this product, you hereby signify that you have read this document carefully and that you understand and agree to abide by all terms and conditions of this document and all relevant documents of this product. You agree that you are solely responsible for your own conduct while using this product and for any consequences thereof. DJI accepts no liability for damage, injury, or any legal responsibility incurred directly or indirectly from the use of this product.

DJI is a trademark of SZ DJI TECHNOLOGY CO., LTD. (abbreviated as "DJI") and its affiliated companies. Names of products, brands, etc., appearing in this document are trademarks or registered trademarks of their respective owner companies. This product and document are copyrighted by DJI with all rights reserved. No part of this product or document shall be reproduced in any form without the prior written consent or authorization of DJI.

This document and all other collateral documents are subject to change at the sole discretion of DJI. This content is subject to change without prior notice. For up to date product information, visit the product page for this product at http://www.dji.com.

This document is available in various languages. In the event of divergence among different versions, the English version shall prevail.

Introduction

The DJI RC Pro remote controller features O3+, the latest version of DJI's signature OCUSYNC™ image transmission technology, and can transmit a live HD view from the camera of an aircraft [1] at a distance of up to 15 km[2]. Users can connect to the internet via Wi-Fi and the Android operating system comes with a variety of functions such as Bluetooth and GNSS.

The built-in 5.5-in high brightness 1000 cd/m² screen boasts a resolution of 1920×1080 pixels while the remote controller comes with a wide range of aircraft and gimbal controls as well as customizable buttons and has a maximum operating time of 3 hours[3].

[1] Refer to the Specifications for more information on supported aircraft.

[2] The DJI RC Pro can reach its maximum transmission distance (FCC) in a wide open area with no electromagnetic interference using a DJI MAVIC™ 3 at an altitude of approximately 120 meters.

[3] The maximum operating time was tested in a lab environment and is for reference only.

Important

Stay alert when using the remote controller to control an Unmanned Aerial Vehicle (UAV). Carelessness may result in serious harm to yourself and others. Download and read the user manuals for the aircraft and remote controller before using for the first time.

1. Fully charge the remote controller before each flight.
2. The remote controller will sound an alert if it is powered on but has not been used for five minutes. It will automatically power off after a further 30 seconds. Move the control sticks or perform any other remote controller action to cancel the alert.
3. Make sure the antennas of the remote controller are unfolded and adjusted to the proper position for optimal transmission.
4. Contact DJI Support to repair or replace the antennas if they are damaged. Damaged antennas greatly decrease performance.
5. Link the remote controller and the aircraft every time the aircraft is changed.
6. Make sure to power off the aircraft before the remote controller.
7. Fully charge the remote controller every three months.
8. Charge the remote controller immediately if the power level reaches 0%. Otherwise, the remote controller may be damaged due to being over discharged for an extended period. Discharge the remote controller to between 40% and 60% if stored for an extended period.
9. DO NOT cover the air vent or the air intake on the remote controller. Otherwise, the performance of the remote controller may be affected due to overheating.
10. Contact DJI or a DJI authorized dealer to replace the components of the remote controller if damaged. DO NOT disassemble the remote controller without the assistance of a DJI authorized dealer.

Overview

The DJI RC Pro remote controller has various components. The following lists detail these parts:

Top View Components:

• 1. Antennas: For signal transmission.
• 2. Back Button/Function Button: Customizable button on the back.
• 3. Control Sticks: For controlling aircraft movement.
• 4. RTH Button: Return-to-Home button.
• 5. Flight Pause Button: Button to pause flight.
• 6. Flight Mode Switch: Select different flight modes.
• 7. 5D Button: Multi-directional button for various functions.
• 8. Power Button: To turn the controller on/off.
• 9. Confirm Button/Customizable C3 Button: For confirmation or custom functions.
• 10. Touchscreen: The main display interface.

Bottom/Front View Components:

• 11. microSD Card Slot: For expandable storage.
• 12. USB-C Port: For charging and data transfer.
• 13. Mini HDMI Port: For video output.
• 14. Gimbal Dial: Controls the gimbal tilt.
• 15. Record Button: Starts/stops video recording.
• 16. Status LED: Indicates the controller's status.
• 17. Battery Level LEDs: Show the remaining battery charge.
• 18. Focus/Shutter Button: Controls camera focus and takes photos.
• 19. Camera Settings Dial: Adjusts camera settings.
• 20. Air Vent: For cooling the controller.
• 21. Control Sticks Storage Slots: Compartments to store control sticks when not in use.
• 22. Customizable C1 Button: A customizable button.
• 23. Speaker: For audio alerts and feedback.
• 24. Customizable C2 Button: Another customizable button.
• 25. Air Intake: For cooling the controller.

[1] A pair of control sticks are stored in the control sticks storage slot before delivery. The control sticks have already been mounted to the remote controller in the illustration in the Overview section.

1. Charging and Checking Battery Level

The built-in battery is placed in hibernation mode before delivery. It must be charged before using for the first time. It takes approximately two hours to fully charge the remote controller using a recommended USB charger rated 12V and one and a half hours using a recommended USB charger rated 15V.

Charging Setup:

• Connect a USB charger (100-240 V) to a power outlet.
• Connect the USB charger to the controller using a USB-C cable.

Checking Battery Level: Press the power button.

Powering On/Off: Press the power button briefly to turn on, then press and hold to turn off.

Battery Level Indicators: The controller displays battery status with LEDs, ranging from Low to High.

Recommendations:

• It is recommended to use an FCC/CE certified USB charger rated 12V or 15V.
• Recharge the battery at least every three months to prevent over discharging. The battery depletes when stored for an extended period.

2. Preparing the Remote Controller

Control Sticks:

• Remove the control sticks from their storage slots.
• Attach the control sticks to the controller and twist to secure them firmly.

Antennas: Unfold the antennas.

Optimal Transmission Range: The optimal transmission range is achieved when the antennas are facing toward the aircraft and the angle between the antennas and the back of the remote controller is 180° or 270°. The illustrations show situations where the operator and aircraft are far away.

Important Notes:

• Make sure the control sticks are firmly mounted.
• A prompt will be received in DJI Fly if the transmission signal is weak during flight. Adjust the antennas to ensure the aircraft is within the optimal transmission range.

3. Activating the Remote Controller

The remote controller needs to be activated before using for the first time. An internet connection is required for activation.

Activation Process:

1. Power on the remote controller.
2. Select the language on the screen (e.g., "Hello", "Next").
3. Follow the prompts to activate (e.g., "Welcome", "Start").

Troubleshooting: Check the internet connection if activation fails. Try activating again if the connection is normal. Contact DJI if activation fails several times.

4. Linking

The remote controller is already linked to the aircraft when purchased as part of a combo. Otherwise, follow these steps to link the remote controller and the aircraft after activation:

1. Power on the remote controller and the aircraft.
2. Press the customizable C1 button, customizable C2 button, and the record button simultaneously. The status LED will blink blue, and the remote controller will beep twice to indicate linking has started.
3. Press the linking button of the aircraft. The status LED of the remote controller will turn solid green if linking is successful.

Refer to the DJI RC Pro User Manual for more information about linking. To download the user manual, visit https://www.dji.com/rc-pro.

5. Flight

Before takeoff, ensure that takeoff is permitted in the camera view of DJI Fly.

Auto Takeoff/Landing

Tap the [takeoff/landing icon] in the camera view. When the prompt appears, press and hold the button to initiate auto takeoff or landing.

Manual Takeoff/Landing

Perform combination stick commands to start/stop the motors.

• Takeoff: Slowly push the left control stick (Mode 2) up to take off.
• Landing: Slowly push the left control stick down until the aircraft lands. Hold for three seconds to stop the motors.

The default control stick mode is Mode 2. The left control stick controls the altitude and heading of the aircraft, while the right control stick controls the forward, backward, and sideward movements.

Left Stick Controls:

• [up arrow]: Ascend
• [down arrow]: Descend
• [left arrow]: Turn Left
• [right arrow]: Turn Right

Right Stick Controls:

• [up arrow]: Forward
• [down arrow]: Backward
• [left arrow]: Strafe Left
• [right arrow]: Strafe Right

Important Notes:

• The motors can only be stopped mid-flight when the flight controller detects a critical error.
• Make sure the remote controller is linked to the aircraft.

Specifications

* 5.8 GHz is unavailable in some countries due to local regulations.

** The DJI RC Pro will support more DJI aircraft in future. Visit the official website for the latest information.