Smartwares Wireless Security Camera

Instruction Manual

Parts Description

Camera:

1. Antenna
2. LED light
3. Lens
4. Day/night sensor
5. Microphone
6. Speaker

A diagram shows a wireless security camera with the following labeled parts: 1. Antenna, 2. LED light, 3. Lens, 4. Day/night sensor, 5. Microphone, 6. Speaker.

Setting Up Your Device

The monitor can pair up to 4 cameras.

1. Turn the camera on by connecting it to the mains supply.
2. Wait for 30 seconds.
3. You will hear: “Start configuration mode”.
4. NOTE: If you don’t hear the voice, press the re-set button on the camera for 6 seconds until you hear “Restore factory setting”.
5. On the monitor from the main menu: Select “Add Camera”.
6. Select “Add Camera”.
7. On the camera: If the above steps are done correctly, you will hear:
   • “Wireless settings, please wait”
   • “Wireless connection successful”
8. On the monitor: Wait for the pairing to complete.

Extended Manual

The extended manual is available at the following internet address: www.smartwares.eu. Search for Wireless Security Camera Set Outdoor CMS-30100.

Declaration of Conformity

Hereby, Smartwares Europe declares that the radio equipment type CMS-30101 is in compliance with Directive 2014/53/EU.

The full text of the EU declaration of conformity is available at the following internet address: www.smartwares.eu/doc.

Compliance Information

[CE mark]

[WEEE symbol - crossed-out wheeled bin]