I70 SMART WATCH USER MANUAL

Product Overview

Physical Button: Press 5 seconds for Power On/Off ⚡️, Short Press for back ↩️.

Magnet Battery Charging Contacts

Heart Rate Sensor ❤️

APP Download

Search "FitCloudPro" in the APP store (Apple store/Google store). Scan QR code ? to download.

User Tips

App Permissions

When installing the app, you will be prompted to access phone permissions. Please allow all permissions:

• Bluetooth ?
• Notification (including alerts / sounds / icon badges) ?
• Local network ? in the "FitCloudPro" app.

Connect Smart Watch

1. Switch watch on: Long press the side button for 3-5 seconds.
2. Ensure your phone's Bluetooth and location services are enabled, and the watch is not bound to other devices.
3. Open the FitCloudPro APP on your mobile phone, set your personal information, and enter the device interface.
4. Click on "Bind Device" ➕.
5. Right-slide on the main dial interface of the watch to view the MAC address. You can use the MAC address from the device list to determine your device. The device name and the corresponding MAC address are paired.
6. Device is successfully connected.
7. Step 1: Open "FitCloudPro APP" -> "OK, Allow" -> "Add A DEVICE" -> Find I70 and choose -> "Pair" ? -> "Allow" -> Done ✔️.
8. Step 2: Go to your mobile phone's Bluetooth settings -> Find "Watch Call" and choose -> connected.

Tips for the first time use

First time to use the watch, please make sure the battery is fully charged.

1. Open the box, use the I70 charging cable, then insert the USB into your laptop or any USB port with 5V to charge the Watch before use to ensure that the Watch is fully charged. The charging time is about 2 hours.
2. To ensure the charging contact is good, please ensure that the metal surfaces are not dirty, oxidizing, or have impurities.
3. When charging, the screen will display the charging symbol.
4. If the device is not used for a long time, please be sure to replenish it every one month.
5. When the Watch is first paired with "APP", it will synchronize the time, date, and battery level of the Watch and display the symbol of success of the BT connection ?.
6. How to Boot Device: Long press the watch key for 5 seconds.
7. How to Shut Down Device: At the watch face page, Long press the watch key for 5 seconds, then choose to shut down. The watch will be turned off and with vibration ?.

APP Functions and Settings

Main interface / dial

Switch the customized dial through the APP (As shown in the picture on the left). Discover more dials through APP.

On the APP device page, select "Dial Library" to find more dials. Click on your favorite dial picture and click to download now. Please do not leave the download page during download.

Personal Profile

Set personal information when you log in. My date - personal date. Gender - height - weight - age.

Call reminder

Keep connected. If the call alert function is enabled, the wristband will vibrate and display the name or number of the caller when there is an incoming call.

Notifications

Keep connected. If this function is enabled, the bracelet will vibrate when there are messages such as Wechat, Facebook, Twitter, and so on. (Grant the APP access to system permission).

Other Functions

• Alarms: Set alarms. ⏰
• Shutter: This function will control your mobile phone to take photos from the watch. ?
• Favorite Contacts: You can add your mobile phone contacts to your watch.
• Others: You can set "Find a bracelet" ?, "Time format", "Sedentary reminder" ?, "Raise your wrist to brighten the screen" ?, "Drink water reminder" ?.
• Upgrade: Upgrade the watch software when necessary. ⬆️

Notes

1. When using GPS under sports mode, please turn on location services for the phone and device. The watch does not have a built-in GPS function; you can enable the GPS function in the app.
2. The data for steps, sleep, heart rate ❤️, blood pressure ?, and blood oxygen saturation ? of the watch will be synchronized to the app. The relevant data can be synchronized by pulling down the corresponding page. More detailed information analysis and data recording can be viewed from the APP.
3. Each time you open the App, the watch will automatically connect to the phone. After right-sliding on the main interface of the watch to enter the MAC address interface, the Bluetooth icon ? will appear, indicating that Bluetooth is connected. If there is no Bluetooth icon, Bluetooth is not connected.

Watch Function Interface

1. Watch face: Long press the watch face button to change it to 4 different watch faces. It shows Dates, Time, etc.

   Customized Watch Face: Go to APP "FitCloudPro" -> Watch faces -> My watch face -> Edit -> Select image -> Choose photo -> Done -> Save -> Screen update -> Done. Then you can see the photo will be showed on your watch.

   More default watch faces: Go to APP "FitCloudPro" -> Watch faces -> Discover more dials -> Choose dial -> Download immediately -> Done. Then you can see the dial will be showed in your watch.

2. From the watch face page, slide your finger left and right to navigate through pages:
   • Sports: Show the step counts. ?
   • Sleep: Show the sleep status, like sleep time, deep sleep time, etc. ?
   • Measure HR: Measure your heart rates. ❤️
   • Exercise Information: Record various exercise information and data.
   • Phone: You can check phone call records, contacts, and dial pad. ?
   • Measure BP: Measure your blood pressure. ?
   • Blood Oxygen: Measure blood oxygen. ?
   • Weather: Show weather status. ☀️
   • Shutter: This function will control your mobile phone to take photos from the watch. ?
   • Player: Music control, play or pause, last music or next music. ▶️
   • Others: In this page, you can set the dial switch, brightness, etc.
3. On the watch face page, you can go to the following page by touching the finger from top to bottom:
   • Do not disturb: You can turn on or off the do not disturb function. ?
   • Brightness: You can adjust the brightness. ?
   • Settings: You can set stopwatch, alarm clock, timer, brightness, phone switch, call settings, vibration ?, theater mode, factory reset ?, shutdown, about ℹ️, APP download.

Settings Details

Vibration setting / Brightness adjustment / Bracelet reset

Down slide screen will display the interface (As in the first picture):

1. Click brightness adjustment ?, you can adjust the screen brightness you need according to your usage.
2. If you need to use the watch with another phone, you need to reset the watch. Click "Restore factory settings" ?, the watch will be restored to the initial state and restart automatically. At this time, all data on the wristband is cleared.
3. Click the "ABOUT" ℹ️ icon, you can check the version information, Bluetooth MAC address, battery percentage display, and Bluetooth connection status.

Troubleshooting & Important Information

Why the watch can't receive message notification?

Android mobile phone background may automatically clean up Apps that are not commonly used, which can cause the watch connection to drop and no longer push messages.

1. Make sure message push is turned on in FitCloudPro settings.
2. Make sure the message can be displayed in the mobile phone's notification bar. Message notification is pushed by reading the phone notification bar; the watch cannot get notifications if message push is closed in mobile phone settings.

Note: Find notification settings in your phone's settings, and turn on WhatsApp, Facebook, Twitter, Phone, SMS.

Getting to know your Device

Warning: ⚠️ This product is not a medical device. The Watches and its applications should not be used for diagnosis, treatment, or prevention of diseases and illnesses. Please consult a qualified medical doctor first if you want to change your habits such as exercises and sleep to avoid causing serious casualties.

It is forbidden to throw this product into fire to avoid explosion. The battery life varies according to the environment and usage mode.

Our company reserves the right to modify and improve the functions described in this manual without prior notice. All contents are subject to the actual product.

Why does the blood pressure data differ from the Sphygmomanometer?

The difference between the smartwatch data and a sphygmomanometer is determined by a variety of factors. The measurement site of the sphygmomanometer is typically the radial artery, while the watch measures on the wrist, which are two different points. Normally, the difference value between aortic blood pressure measurement and micro-arterial measurement can be around 3-40 mmHg. Additionally, if you use the smartwatch and sphygmomanometer simultaneously, the sphygmomanometer band can apply pressure to your arm, affecting blood flow and potentially increasing the difference in readings.

Why can't wear the smart watch to take a bath & hot springs & sauna?

The water temperature in baths, hot springs, and saunas is relatively high, producing a lot of water vapor. Water vapor, being a gas with small molecular radius, can easily infiltrate through the watch's casing gaps. When the temperature drops, it can condense back into liquid. Water droplets can easily cause a short circuit inside the watch, damaging the circuit board and the watch itself.

Special attention: For other issues regarding watch usage, you can find detailed answers in the app's suggestion feedback section.