American Communication Systems | Two-Way Radio Dealer
Instruction Manual for ICOM models including: iSAT100, iSAT100 Satellite PTT Two-Way Radio, iSAT100, Satellite PTT Two-Way Radio, PTT Two-Way Radio, Two-Way Radio, Radio
File Info : application/pdf, 20 Pages, 702.77KB
DocumentDocumentOPERATING MANUAL SATELLITE PTT iSAT100 INTRODUCTION 1 ACCESSORIES ATTACHMENTS 2 PANEL DESCRIPTION 3 BATTERY CHARGING 4 BASIC OPERATION 5 OTHER FUNCTIONS 6 HEADSET CONNECTION 7 MENU SCREEN 8 SPECIFICATIONS AND OPTIONS 9 TROUBLESHOOTING INTRODUCTION Thank you for choosing this Icom product. This product is designed and built with Icom's state of the art technology and craftsmanship. With proper care, this product should provide you with years of trouble-free operation. Important READ ALL INSTRUCTIONS carefully before using the transceiver. This OPERATING MANUAL contains advanced features and operating instructions for the IC-SAT100. READ also the BASIC MANUAL that is supplied with the transceiver. KEEP THE MANUALS, because it contains important operating information that may be useful in the future. Table of contents INTRODUCTION ..................................................... i Important ....................................................... i 1 ACCESSORIES ................................................ 1 Supplied accessories .................................... 1 Attaching accessories ................................... 1 2 PANEL DESCRIPTION ..................................... 4 Front, top, and side panels............................ 4 Function display ............................................ 5 3 BATTERY CHARGING ..................................... 6 Battery charger.............................................. 6 4 BASIC OPERATION ......................................... 7 Receiving and transmitting ............................ 7 5 OTHER FUNCTIONS........................................ 8 Using the Message function .......................... 8 Using the Emergency mode .......................... 8 Using the Key Lock function.......................... 8 Using the Surveillance function ..................... 9 Using the AquaQuake function...................... 9 Using the Last Call Play function................... 9 6 HEADSET CONNECTION ................................ 10 Using a Bluetooth® headset .......................... 10 7 MENU SCREEN................................................ 11 Using the Menu screen ................................. 11 Menu items.................................................... 11 8 SPECIFICATIONS AND OPTIONS................... 15 Specifications ................................................ 15 Options .......................................................... 16 9 TROUBLESHOOTING...................................... 17 Troubleshooting............................................. 17 Icom, Icom Inc. and the Icom logo are registered trademarks of Icom Incorporated (Japan) in Japan, the United States, the United Kingdom, Germany, France, Spain, Russia, Australia, New Zealand and/or other countries. The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Icom Inc. is under license. Other trademarks and trade names are those of their respective owners. 3M, PELTOR, and WS are trademarks of 3M Company. AquaQuakeTM is a trademark of Icom Incorporated. Iridium, and the Iridium logo are registered trademarks of Iridium Satellite LLC and its affiliates. All other products or brands are registered trademarks or trademarks of their respective holders. i 1 ACCESSORIES Supplied accessories Battery pack Belt clip Power adapter* (with adapter plugs) Antenna Battery charger* * May not be supplied, or the shape may be different, depending on the transceiver version. Attaching accessories D Antenna Connect the supplied antenna to the antenna connector. CAUTION: · DO NOT carry the transceiver by holding only the antenna. · DO NOT connect an antenna other than the supplied antenna, or those listed in this manual. · DO NOT transmit without an antenna. 1 1 ACCESSORIES Attaching accessories D Battery pack/Battery case CAUTION: DO NOT attach or detach the battery pack or the battery case when the transceiver is wet or soiled. This may result in water or dust getting into the transceiver, battery pack, or battery case and may damage them. NOTE: Keep the battery pack terminals clean. It's a good idea to occasionally clean them. To attach: 1. Slide the battery pack in the direction of the arrow. (q) 2. Hook the latch until it makes a `click' sound. (w) To detach: z Unhook the latch (q), and then lift up the battery pack. (w) 1 2 Latch 2 1 2 1 ACCESSORIES Attaching accessories D Belt clip To attach: 1. Detach the battery pack. 2. Slide the belt clip in the direction of the arrow until the belt clip is locked and makes a `click' sound. 3. Attach the battery pack. To detach: 1. Detach the battery pack. 2. Lift the tab up (1), and slide the belt clip in the direction of the arrow (2). 3. Attach the battery pack. BE CAREFUL! Do not break your fingernail. 2 1 3 2 PANEL DESCRIPTION Front, top, and side panels 1 10 9 Antenna Connector 2 3 4 Microphone 8 7 6 5 Micro USB Connector Speaker 1 EMERGENCY KEY [EMER] Hold down to transmit an Emergency call. (p. 8) 2 PTT SWITCH [PTT] Hold down to transmit, release to receive. (p. 7) 3 P1/P2 KEYS [P1]/[P2] Push to use the function assigned in the "Key Setup" menu*. (p. 13) *[OK] > Functions > Key Setup 4 MENU/OK KEY [OK] z Push to enter the Menu screen. z Push to select an item in the Menu screen. 5 BACK/HOME KEY [BACK] z Push to return to the previous Menu screen. z Hold down to exit the Menu screen. 6 DIRECTIONAL KEY [UP]/[DOWN]/[LEFT]/[RIGHT] z Push to select a menu item, setting, and so on. z Push [UP]/[DOWN] to display the Talkgroup list in the Main screen. 7 MULTI-CONNECTOR Connects to an optional headset. 8 STATUS INDICATOR z Lights green while receiving. z Blinks green while the "OPEN" status. z Lights red while transmitting. z Blinks orange while registering, or no satellites are found. 9 VOLUME/POWER SWITCH [VOL] z Rotate to turn the transceiver ON or OFF. (p. 7) z Rotate to adjust the audio output level. 10 TALKGROUP SELECTOR z Rotate to select a Talkgroup. (p. 7) 4 2 PANEL DESCRIPTION Function display 1 23 00:00 Icon area Text area Last Call Scan Key display area L The display is shown in English as an example. Select other languages on the Menu screen, if necessary. ([OK] > Display > Language) D Icon Area Indicators 1 SIGNAL STRENGTH Displays the relative receive signal strength level. 2 CLOCK Displays the current time. 3 BATTERY Displayed or blinks to indicate the battery status. Full Mid Charging Battery exhausted required Icons The following icons are displayed in the Icon Area. LOCK Displayed when the Lock function is ON. (p. 8) SURVEILLANCE Displayed when the Surveillance function is ON. (p. 9) VIBRATION Displayed when the Vibration function is ON. (p. 14) Bluetooth® · " " is displayed when Bluetooth is activated. (p. 12) · " " is displayed when a Bluetooth device is connected. (p. 10) MESSAGE · Displayed when a message have been received. (p. 8) · Displayed if unread messages are still in the Message memory. RECORD Displayed when the Record function is ON. (p. 11) USB Displayed when a USB device is connected. D Text Area Displays the status, preset transceiver name, and selected Talkgroup Name. Status Description IDLE The selected Talkgroup is not active. OPEN The selected Talkgroup is active but no one is talking. REQUESTING Requesting a transmission. TALKING Transmitting LISTENING Receiving SCANNING Scanning a call D Key Display Area Displays the names of the function assigned to [P1] and [P2]. You can assign functions in the Menu screen. (p. 13) 5 3 BATTERY CHARGING Battery charger NOTE: Before attaching or detaching a battery pack, BE SURE to turn OFF the transceiver by rotating [VOL] fully counter clockwise until it makes a "click" sound. Otherwise, a transceiver malfunction could occur. D Supplied battery charger Charging time: Approximately 3.1 hours for the BP-300 Turn OFF Power adapter* Battery pack Battery charger Charging indicator Lights orange: Charging Lights green: Charged Blinks red: When a charging error has occurred. * May not be supplied, or the shape may be different, depending on the transceiver version. NOTE: If the charging indicator alternately blinks green and orange, remove the battery pack or the transceiver from the charger, then reinsert it. If the charging indicator still alternately blinks green and orange, ask your dealer for details. D Extend Battery Life function The charger has the Extend Battery Life function switch on the bottom panel. · OFF: The battery is fully charged. The operating time of the transceiver is maximum. · ON: The battery is not fully charged to not shorten the battery life cycle. L The battery life cycle is extended. But the operating time of the transceiver becomes shorter. D Micro USB Connector You can also use the Micro USB Connector to charge instead of the supplied battery charger. L An USB cable that compatible with more than 2.0 A is required (User supplied). L " " is displayed while charging. L Charging time may longer than using a battery charger. 6 4 BASIC OPERATION Receiving and transmitting D Turning ON the transceiver z Rotate [VOL] to turn ON the transceiver. · The transceiver searches for a satellite. · When the transceiver is connected and registered to a satellite, the status "IDLE," transceiver name, and Talkgroup name are displayed. L Rotate Talkgroup selector to select a Talkgroup. L Push [Last Call] to playback the received call. (p. 9) L Push [UP] or [DOWN] to display the Talkgroup List. D Receiving When receiving, "LISTENING," and the source transceiver's name is displayed, and audio should be heard. L Rotate [VOL] to adjust the audio output level. 00:00 LISTENING TRANSCEIVER 02 TALKGROUP01 Last Call Ignore D Transmitting CAUTION: DO NOT transmit without an antenna. 1. Hold down [PTT]. L "REQUESTING" is displayed while the transceiver requests a transmission. 2. When "TALKING" is displayed, speak at your normal voice level. L You can continuously transmit up to the period of time allowed by the system. 00:00 TALKING TRANSCEIVER 01 TALKGROUP01 Last Call Ignore D Scan and Ignore [Scan] Push to scan a call. [Ignore] Push to ignore a received call. L The Ignore function will be canceled if there are no more calls for 90 seconds or longer. NOTE: · The transceiver receives and transmits using several satellites in the same orbit. Receiving and transmitting may fail, depending on the satellite position or any obstacles between the transceiver and the satellites. · Your body can also be an obstacle. Do not hook the transceiver on your waist. 7 5 OTHER FUNCTIONS Using the Message function The transceiver can receive and send short messages. D Receiving When receiving, a received message's header and the Talkgroup name are displayed. L Push [RX MSG] to display a received message. 00:00 HELLO! TALKGROUP 01 Last Call RX MSG D Transmitting CAUTION: DO NOT transmit without an antenna. 1. Open the "Message List" in the Menu screen. [OK] > PTT Options > Message List L You can also assign [P1] key as a shortcut to the "Message List" (p. 13). 2. Select a message to send. TIP: Writing a new message 1. Select a blank on the "Message List" screen, and then push [OK]. · The "Message Display" screen is displayed. 2. Push [OK] again to display the cursor. 3. Enter a message of up to 100 characters. Message Display abcde ddd° mm'ss" L To enter a character, push [Up] or [Down]. Usable characters: a ~ z, A ~ Z, 0 ~ 9, / + - = \ . ! ? ' , * # " L To move the cursor, push [Right] or [Left]. L To insert a space, push [P1]. L To delete, push [P2] or [BACK]. 3. Push [PTT] to send the message. D Received message list You can read received messages on the "Received Message" screen. [OK] > PTT Options > Received Message Using the Emergency mode In the Emergency mode, the transceiver can transmit an Emergency call, as shown below. L Confirm the transceiver is connected and registered to a satellite. 1. Hold down [EMER] for 2 seconds. · Beep sounds, and the transceiver enters the Emergency mode. L "REQUESTING" is displayed while the transceiver requests the transmission. 2. When "TALKING" is displayed, the transceiver transmits the audio for 5 seconds. Using the Key Lock function You can use the Key Lock function to prevent accidental or unnecessary function access. 1. Assign the function to the [P2] key in the Menu screen. [OK] > Functions > Key Setup > P2 Key 2. Push [P2] until "Lock ON" or "Lock OFF" is displayed to turn the function ON or OFF. · " " is displayed while the function is ON. D Auto Key Lock function The transceiver locks the keypad* when no key is pushed for 30 seconds. * Except for [EMER], [PTT], [VOL], and Talkgroup selector. z Turn the function ON or OFF in the Menu screen. [OK] > Functions > Auto Key Lock · " " is displayed while the function is ON. L Push [P2] until "Lock OFF" is displayed to turn OFF the function. 8 5 OTHER FUNCTIONS Using the Surveillance function When this function is turned ON, the beep is not heard and the backlight and the Status indicator do not light, even when a signal is received, or a key is pushed. 1. Assign the function to the [P1] key in the Menu screen. [OK] > Functions > Key Setup > P1 Key 2. Hold down [BACK] for 1 second to exit the Menu screen. 3. Push [Surveillan] to turn the function ON or OFF. L " " is displayed while the function is ON. Using the AquaQuake function The AquaQuake water draining function removes water from the speaker grill by vibrating the internal speaker. 1. Assign the function to the [P1] key in the Menu screen. [OK] > Functions > Key Setup > P1 Key 2. Hold down [BACK] for 1 second to exit the Menu screen. 3. Hold down [AquaQu...] to use the function. L Water in the speaker grill may muffle the sound coming from the speaker. L After the specified period of time, the function automatically stops, even if you continue holding down the key. L The function works with only the internal speaker. Using the Last Call Play function The transceiver can playback the previously received call. L You can playback up to 6 latest calls. L Confirm the Call Recorder function is turned ON. ([OK] > PTT Options > Call Recorder) 1. Assign the function to the [P1] key in the Menu screen. [OK] > Functions > Key Setup > P1 Key 2. Hold down [BACK] for 1 second to exit the Menu screen. 3. Push [Last Call] to playback the received call. 9 6 HEADSET CONNECTION Using a Bluetooth® headset The transceiver can operate with Bluetooth headsets. The communication range of Bluetooth is approximately 10 meters (33 ft). Bluetooth® Bluetooth headset (Example: Optional VS-3) 3. Pairing and connecting the Bluetooth headset 1. Select "Find Device," and then push [OK]. [OK] > Bluetooth > BT Device List > Find Device 2. Select "Headset," and then push [OK]. · The transceiver searches for a headset. L Push [BACK] to cancel searching. 3. Select the headset to pair and connect, and then push [OK]. L A passkey or PIN code may be required to pair, depending on the headset. Refer to your headset or device's instructions for details. 4. Hold down [BACK] for 1 second to exit the Menu screen. · " " is displayed if the headset or device is correctly connected. NOTE: The Bluetooth communication range may vary, depending on the environment where you operate the device. D Electromagnetic Interference When you use a Bluetooth device, pay attention to the following: Bluetooth devices operate in the 2.4 GHz band. The 2.4 GHz band is also used by other devices, such as Wireless LAN products, microwave ovens, RFID systems, amateur radio stations, and so on. When using this device near such devices, interference may occur, causing a decrease in communication speed, and an unstable connection. In such cases, use this device away from the other devices, or stop using those devices. D Pairing with a headset You can pair a maximum of 4 Bluetooth headsets to the transceiver. L These instructions describe pairing with the VS-3 Bluetooth® headset, as an example. 1. Turning ON the transceiver's Bluetooth function 1. Select "Bluetooth ON/OFF," in the Menu screen, and then push [OK]. [OK] > Bluetooth > Bluetooth ON/OFF 2. Select "ON," and then push [OK] to turn ON the Bluetooth function. 3. Hold down [BACK] for 1 second to exit the Menu screen. · " " is displayed. D Disconnecting a paired device You can disconnect a paired Bluetooth device if it is not being used. 1. Select "BT Device List," and then push [OK]. [OK] > Bluetooth > BT Device List 2. Select the device to disconnect, and then push [OK]. 3. Select "Disconnect," and then push [OK]. 4. Hold down [BACK] for 1 second to exit the Menu screen. · " " is displayed if the headset or device is correctly disconnected. D Deleting a headset Disconnect a connected headset before deleting it. 1. Select "BT Device List," and then push [OK]. [OK] > Bluetooth > BT Device List 2. Select the headset to delete, and then push [OK]. 3. Select "Delete," and then push [OK] to delete the headset. 4. Hold down [BACK] for 1 second to exit the Menu screen. 2. Entering the VS-3 Pairing mode 1. Confirm the VS-3 is turned OFF. 2. Hold down [ ] for 6 seconds. · The LED alternatively blinks red and blue, and then the headset enters the Pairing mode. 10 7 MENU SCREEN Using the Menu screen You can use the Menu screen to set infrequently changed values or function settings. The Menu screen is constructed in a tree structure. You can go to the next tree level by pushing [RIGHT] or [OK], go back a level pushing [LEFT] or [BACK]. To select an item, push [UP] or [DOWN]. NOTE: The menu items contained in the transceiver may differ, depending on the its version or presettings. Menu items D Talkgroup Refresh Talkgroup Select the item, and then push [OK] to refresh the Talkgroup list. Talkgroup List Displays the Talkgroup list. L "P" is displayed for the Priority Talkgroup. D PTT Option Talk Timer The Talk Timer displays the time remaining for the current talk period. · OFF: Turns OFF the function. · ON: Displays the remaining time while transmitting. Mic gain Sets the microphone sensitivity to between -5 and 5. L Higher values make the microphone more sensitive to the user's voice. Call Recorder Turn ON or OFF the Call Recorder function. · OFF: Turns OFF the function. · ON: Records the received call audio. Received Message Displays the Received message list. Message List Displays the Created message list. Location Sharing Turn ON or OFF the Location Sharing function. OFF: Turns OFF the function. ON: Share your location with other Talkgroup participants. Menu Talkgroup PTT Options Bluetooth Functions Clock Position Format Select a format to display your position data. Position Format ddd° mm.mm' ddd° mm'ss" Distance Format Select a format to display the distance. Distance Format Miles Kilometers 11 7 MENU SCREEN Menu items D Bluetooth Bluetooth ON/OFF Turn the Bluetooth function ON or OFF. BT Device List Displays the paired Bluetooth headsets and Bluetooth data devices. Find Device Search for a Bluetooth headset or data device to pair and connect. · Headset: Search for a Bluetooth headset. · Data Device: Search for a Bluetooth data device. Bluetooth Reset Initialize the built-in Bluetooth unit. BT Auto Connect Select whether or not to automatically connect to the last bonded Bluetooth device. · OFF: The user must manually connect to a bonded device. · ON: Automatically connects to the last bonded device. BT Audio Setting Select the audio output device for when the Bluetooth headset is connected. · BT Only: Sets the Bluetooth headset as the Audio Output device. · BT & SP: Sets the Bluetooth headset and the transceiver's speaker as the audio output devices. BT Device Info Displays the Bluetooth device information such as the device name, address, support profile, version, and so on. Key Beep (VS-3) Turn the optional VS-3 Bluetooth headset's key beep ON or OFF. PWR Save (VS-3) Select whether or not to operate using the Bluetooth headset's battery saving mode while the optional VS-3 Bluetooth headset is connected. · OFF: The Power Save mode is OFF. · ON: The Power Save mode is activated when there is no communication or operation for 120 seconds. PTT Beep (VS-3) Set the beep sound when pushing [PTT] on the optional VS-3 Bluetooth headset. · OFF: No beep sounds when pushing PTT. · ON: A beep sounds when pushing PTT. One-touch PTT Set the One-Touch PTT function while the optional VS-3 Bluetooth headset is connected. The function enables you to communicate with a single push of the VS-3's [PTT]. · OFF: Push [PTT] to transmit and release to receive. · ON: Push [PTT] to transmit and push again to receive. Waiting Pairing Waits for the pairing request from a Bluetooth headset or data device. 12 7 MENU SCREEN Menu items D Functions Auto Key Lock Turn the Auto Keypad Lock function ON or OFF. · OFF: Turns OFF the function. · ON: The transceiver locks the keypad* when no key is pushed for 30 seconds. * Except for [EMER], [PTT], [VOL], and Talkgroup selector. Key Setup Assign functions to the [P1] and [P2] keys. Key Setup P1 Key P2 Key Assignable functions [P1] [P2] OFF (No function is assigned) OFF (No function is assigned) Talkgroup List (p. 11) Scan Start/Stop (p. 7) My Position (p. 14) Lock (p. 9) Surveillance (p. 9) AquaQuake (p. 9) Last Call Play (p. 9) Message List (p. 11) PC Command Select a connecting method to connect the transceiver to a PC. · OFF: Nothing is selected. · Multi-Connector: Select when connect to a PC using a connection cable with Multi-Connector. · USB: Select when connect to a PC using a USB cable (User supplied). · Bluetooth: Select when connect to a PC using a Bluetooth device. D Clock Clock Display Select whether or not to display the clock on the Main screen. Time Format Select time format for the clock. Time Format 12 hours 24 hours Clock Time Zone Select your local time zone. Clock Time Zone UTC-02:00 UTC-01:30 UTC-01:00 UTC-00:30 UTC+00:00 DST Selects whether or not to use Daylight Saving Time (DST) for the clock. D Display Backlight Select a Backlight setting. · OFF: The backlight is always OFF. · ON: The backlight is always ON. · Auto: When any switch except [PTT] is pushed, the backlight lights for 5 seconds. Contrast Adjust the contrast level. Language Select a Language for the user interface. 13 7 MENU SCREEN Menu items D Beep/Vibration Sets the transceiver's beep level and select an option for vibration. TIP: When you set the beep level to between "1 (Linked)" and "5 (Linked)," you can adjust the beep level within the range of 0 and selected level by rotating [VOL]. System Beep Lv Sets the system beep output level. The beep sounds when connecting to or blocked from the system. Emer Beep Lv Sets the beep output level when in the Emergency mode. Key Beep Lv Sets the key beep output level. Ringer Lv Sets the ringer output level. Opening Beep Lv Sets the opening beep output level. The transceiver beeps when it is turned ON. System Vibration Turn the system vibration ON or OFF. The transceiver vibrates when connecting to or blocked from the system. Emer Vibration Turn the Emergency vibration ON or OFF. The transceiver vibrates when received an Emergency call. Key Vibration Turn the key vibration ON or OFF. The transceiver vibrates when you pushed any key except [PTT]. Receive Vibration Turn the receive vibration ON or OFF. The transceiver vibrates when received any call or message. Opening Vibration Turn the opening vibration ON or OFF. The transceiver vibrates when it is turned ON. D Information Battery Info Displays the battery information such as voltage, battery percentage, cycle count, and so on. RSSI Displays the Received Signal Strength Indication (RSSI). My Position Displays your current position. Firmware Info Displays the transceiver's firmware information. Satellite Info Displays satellite information. Certification Displays the certifications acquired with the transceiver. 14 8 SPECIFICATIONS AND OPTIONS Specifications (Measurements made without an antenna.) L All stated specifications are subject to change without notice or obligation. D General · Frequency range: · Number of channels: · Type of emission: · Duplexing method: · Multiplexing method: · Antenna impedance: · Input impedance (MIC): · Output impedance (audio): · Operating temperature range: · Power supply voltage: · Current drain: · Dimensions*: · Weight (approximate): 1616 ~ 1626.5 MHz 240 Channels 41K7Q7W TDD (Time Domain Duplex) TDMA/FDMA 50 nominal 2.2 k 8 30°C ~ +60°C, 22°F ~ +140°F 7.5 V DC nominal Less than 2.5 A 57.8 (W) × 135 (H) × 32.8 (D) mm, 2.3 (W) × 5.3 (H) × 1.3 (D) inches 360 g, 12.7 oz with BP-300 and FA-S102U D Transmitter · Output power: · Modulation: · Channel spacing: · Frequency stability: · Spurious emissions: · Audio harmonic distortion: 7.0 W maximum DE-QPSK/DE-BPSK 41.667 kHz ±1.5 ppm 0.25 W (Less than 1 GHz) 1.0 W (More than 1 GHz) 0.8% typical (at AF 1 kHz) D Receiver · Sensitivity: · Audio output power (At 5% distortion): * Projections not included. 116 dBm typical 1.5 W (Typical) into an 8 load (Internal speaker) 1.0 W (Typical) into an 8 load (External speaker) 15 8 SPECIFICATIONS AND OPTIONS Options D BATTERY PACK · BP-300 BATTERY PACK Voltage: 7.2 V Capacity: 2200 mAh (minimum), 2350 mAh (typical) Approximate battery life*: 14.5 hours * Operating periods are calculated under the following conditions. TX : RX : standby = 5 : 5 : 90 D CHARGERS · BC-241 DESKTOP CHARGER + BC-242 AC ADAPTER To rapidly charge a single battery pack. · BC-214N MULTI CHARGER + AD-140 CHARGER ADAPTER + BC-157S AC ADAPTER To rapidly charge up to 6 battery packs. D OTHERS · OPC-656 DC POWER CABLE Use with a 13.8 V power source instead of the power adapter. (Use with the BC-214N) · FA-S102U ANTENNA · MBB-5 BELT CLIP · HM-222 SPEAKER MICROPHONE With an Emergency key. The HM-222 meets IP68 requirements for waterproof protection. · VS-3 Bluetooth® HEADSET The Bluetooth® headset with a [PTT] switch. About the third party Bluetooth® headsets: Icom has checked the PTT operation with some 3M Peltor headsets such as the WS Headset XP, WS ProTac XP and WS Alert XP. (Compatibility not guaranteed.) · VS-5MC PTT SWITCH CABLE + HS-94, HS-95, HS-97 HEADSET VS-5MC: Used to connect a headset to a transceiver. HS-94: Ear-hook type HS-95: Neck-arm type HS-97: Throat microphone · HM-163MC TIEPIN TYPE MICROPHONE + EH-15B EARPHONE, SP-28 EAR HOOK TYPE EARPHONE, SP-26 TUBE EARPHONE · SP-32 TUBE TYPE EARPHONE ADAPTER For use with EH-15B. · SP-27 TUBE EARPHONE, SP-29 EAR HOOK TYPE EARPHONE, SP-40 EARPHONE + AD-135 EARPHONE ADAPTER AD-135: Used to connect an earphone to the transceiver's multi-connector. · AD-118 ACC ADAPTER Used to connect a headset with a Hirose-6-pin connector to the transceiver's multi-connector. Some options may not be available in some countries. Ask your dealer for details. 16 9 TROUBLESHOOTING Troubleshooting PROBLEM POSSIBLE CAUSE SOLUTION The transceiver does · The battery is exhausted. · Recharge the battery pack. not turn ON. · The battery pack is not correctly attached. · Correctly reattach the battery pack. REF. p. 6 p. 2 Little or no sound comes from the speaker. You cannot transmit. You cannot use the keypad. No beep sounds. · Volume level is set too low. · The battery is exhausted. · An obstacle may exist between the satellite and transceiver. · The Key Lock function is ON. · The Key beep is set to OFF. · The audio output level is low. · Adjust the volume level. p. 4 · Recharge the battery pack. p. 6 · Retry transmitting in a place without p. 7 obstacles. · Push [P2] until "Lock OFF" is displayed p. 4 to turn OFF the function. · Adjust the key beep level in the Menu p. 4 screen. ([OK] > Beep/Vibration > Key Beep Lv) · Rotate [VOL] to adjust the audio output p. 4 level. 17 A7517-3EX © 2019 Icom Inc. May 2019 1-1-32 Kamiminami, Hirano-ku, Osaka 547-0003, Japan