Thomann Battery Charger Pro MKII

Safety Instructions

Intended use

This device is used to charge suitable rechargeable batteries. Any other use or use under other operating conditions is considered to be improper and may result in personal injury or property damage. No liability will be assumed for damages resulting from improper use.

Danger for children

⚠️ Ensure that plastic bags, packaging, etc. are disposed of properly and are not within reach of babies and young children. Choking hazard! Ensure that children do not detach any small parts from the product. They could swallow the pieces and choke! Never let children unattended use electrical devices.

Risk of fire due to incorrect polarity

Incorrectly inserted batteries may destroy the device or the batteries. Ensure that proper polarity is observed when inserting batteries.

Possible damage by leaking batteries

Leaking batteries can cause permanent damage to the device. Take batteries out of the device if it is not going to be used for a longer period.

Where to use the product

• Never use the product in conditions of extreme temperature or humidity
• in extremely dusty or dirty areas
• at locations where the unit can become wet

General handling

• To prevent damage, never use force when handling the product.
• Never immerse the product in water. Just wipe it with a clean dry cloth. Do not use liquid cleaners such as benzene, thinners or flammable cleaning agents.
• Disconnect the device from the mains power supply when it is not in use.

Features

• Professional charger for up to 16 rechargeable batteries / accumulators of size AA or AAA
• Separate charging circuit with indicator light for each battery
• Trickle charging
• Detection of faulty batteries
• Protection against overvoltage, overcharging and overheating
• 19" / 2 RU metal housing

Operating Elements

The Thomann Battery Charger Pro MKII features:

• 1. Charge slots: The front panel displays 16 individual slots designed to hold AA or AAA rechargeable batteries.
• 2. Status indicator LEDs: Each charge slot is accompanied by an LED indicator. The LED flashes to show that a battery is currently being charged, and it lights up solid when the battery is fully charged.
• 3. On-/Off switch: A switch located on the front panel to turn the charger on or off.
• 4. Connection for the power adapter: On the rear panel, a power input port is available for connecting the external power adapter. It is labeled "POWER INPUT" and specifies a 12V DC connection.
• 5. Ventilation openings: The rear panel includes ventilation openings to ensure proper airflow and prevent overheating during operation.

Technical Specifications

• Power supply: External power adapter, 100 - 240 V ~ 50/60 Hz
• Operating voltage: 12 V ⎓ / 3 A, centre positive
• Dimensions (W x H x D): 483 mm x 89 mm x 80 mm
• Weight: 1.6 kg
• Ambient conditions: Temperature range: 0 °C...40 °C, Relative humidity: 20 %...80 % (non-condensing)

Environmental and Disposal Information

For the transport and protective packaging, environmentally friendly materials have been chosen that can be supplied to normal recycling. Ensure that plastic bags, packaging, etc. are properly disposed of. Do not just dispose of these materials with your normal household waste, but make sure that they are collected for recycling. Please follow the notes and markings on the packaging.

Batteries must not be disposed of as domestic waste or thrown into fire. Dispose of the batteries according to national or local regulations regarding hazardous waste. To protect the environment, dispose of empty batteries at your retail store or at appropriate collection sites.

This product is subject to the European Waste Electrical and Electronic Equipment Directive (WEEE) in its currently valid version. Do not dispose of your old device with your normal household waste. Dispose of this product through an approved waste disposal firm or through your local waste facility. Comply with the rules and regulations that apply in your country. If in doubt, consult your local waste disposal facility.