Edifier MR3 Studio Monitor User Manual
1. EDIFIER ConneX App
The EDIFIER ConneX app allows you to:
- Control playback from the Bluetooth source device.
- Control the master volume.
- Select sound effects or customize EQs.
- Perform acoustic tuning.
- Upgrade the firmware.
- Access more functions.
Download EDIFIER ConneX App:
Scan the QR code on the quick start guide or packaging with your smart device. Alternatively, search for "EDIFIER ConneX" in the Apple App Store (iOS) or Google Play (Android). Download and install the app.
How to use this app:
- Connect your smart device to the speaker via Bluetooth.
- In Bluetooth mode, open the EDIFIER ConneX App on your smart device.
- Tap the menu for settings and playback control.
2. What's in the Box?
- Passive speaker
- Active speaker
- Speaker connecting cable
- 3.5mm to RCA audio cable
- 3.5mm to 3.5mm audio cable
- Power cable
- Quick start guide
Note: Images are for illustrative purposes only and may differ from the actual product. Information and specifications are subject to change without notice for technical improvement and system upgrade.
3. Cable Connection
Note: Power input: 100-240V~50/60Hz 300mA. All audio inputs, including Bluetooth, can be used in parallel. Connecting headphones to the " headphone port" will mute the speaker's sound. Headphone volume can be controlled with the speaker's volume knob.
4. Mode Switch
Press and hold the " knob to switch the speaker between work mode and standby mode (1.5s).
5. Controls
| Button/Knob | Mode | Action |
|---|---|---|
| Knob | Work mode | Press to switch sound effects. Rotate clockwise to increase volume. Rotate counterclockwise to decrease volume. |
| Knob | Bluetooth device connected | Press and hold to disconnect the current Bluetooth device and switch the speaker to Bluetooth pairing mode. |
| Knob | Bluetooth hidden mode | Press to exit Bluetooth hidden mode and enter Bluetooth pairing mode. |
Note: Volume sync is not supported. Adjust volume on the speaker and your device separately.
6. Indicator Status
| Indicator Status | Speaker Status |
|---|---|
| Solid red | Monitor sound effect |
| Solid green | Music sound effect |
| Solid white | Customized sound effect |
| Blinking | Bluetooth pairing mode |
| Blinking and then solid | Bluetooth device connected |
| Blinking in red and green | Upgrading the firmware |
7. Bluetooth Connection
- Press the " button on the speaker. The indicator will blink.
- On your device, select "EDIFIER MR3" in its Bluetooth device list to connect. The indicator will be steadily lit when the connection is established.
The speaker will automatically reconnect to the last-connected Bluetooth device after switching to work mode. If not, press the " button to activate re-connection. To disconnect, press and hold the " button for 1.5 seconds.
Note: Pin code for connection is "0000" if needed. Ensure your audio source device supports A2DP and AVRCP profiles. If no device is connected in 3 minutes, the speaker enters Bluetooth hidden mode. In this mode, new devices cannot find the speaker, but existing devices in the pairing record can reconnect by selecting "EDIFIER MR3". Press the " button to exit hidden mode.
8. Multipoint Connection
This speaker supports the simultaneous connection of two Bluetooth devices.
- Connect the first Bluetooth device.
- Press and hold the " button for 1.5 seconds.
- On the second Bluetooth device, select "EDIFIER MR3" to connect.
- On the first Bluetooth device, select "EDIFIER MR3" to reconnect.
Pause or stop playback on the current Bluetooth device before streaming audio from the second one.
9. Acoustic Tuning
By the speaker knobs:
- High knob: Boost or cut high frequencies above 10kHz by ±6dB.
- Low knob: Boost or cut low frequencies around 125Hz by ±6dB.
By the EDIFIER ConneX App:
- Low cutoff: Attenuate frequencies lower than the specified frequency (20-100Hz) at a selected slope (6, 12, 18, or 24dB/octave).
- Acoustic space: Select a gain level to compensate for bass boost, varying with speaker placement (0dB for middle of room, -4dB for corner).
- Desktop control: Enable this feature to mitigate apparent decibel level increases at certain frequencies when speakers are placed on a desktop or have objects in front of them.
10. Specifications
- Total output power (RMS): 18W+18W (DRC on)
- Frequency response: 52Hz-40kHz
Declaration for EU:
- Frequency Band: 2.402GHz ~ 2.480GHz
- RF Power Output: ≤13 dBm (EIRP)
- There is no restriction of use.
11. Troubleshooting
Cannot connect to your Bluetooth device
- Ensure distance is less than 10 meters with no obstacles.
- Ensure no other device is connected via Bluetooth.
- Ensure the product is in Bluetooth pairing mode.
- Restart the product and your Bluetooth device.
- Reset the product to factory settings.
No power
- Ensure the power cable is properly connected.
- Ensure the power supply is not disconnected.
No sound
- Ensure the product and your device are properly connected.
- Ensure the correct audio input source is selected.
- Ensure playback is not paused.
- Increase the volume on both the product and your device.
Noise coming from speakers
EDIFIER speakers generate minimal noise. If background noise from other audio devices is high, unplug audio cables and increase volume. If no sound is heard at 1 meter, the product is functioning correctly.
Contact Information
For more information about EDIFIER, please visit www.edifier.com.
For EDIFIER warranty queries, please visit the relevant country page on www.edifier.com and review the section titled "Warranty Terms".
USA and Canada: service@edifier.ca
South America: Please visit www.edifier.com (English) or www.edifierla.com (Spanish/Portuguese) for local contact information.
