Network Switch Port Configuration and Status Indicators

Front Panel Overview

The front panel of the network switch displays various ports and status indicators. The ports are numbered from 1 to 26.

Port Descriptions:

Ports 1-24: 10/100Mbps (PoE) - These ports support Power over Ethernet and operate at speeds of 10 or 100 Megabits per second.
Ports 25-26: 10/100/1000Mbps - Combo - These are combo ports that support speeds of 10, 100, or 1000 Megabits per second.

Status Indicators:

For each of the first 24 ports, there are indicators for 'Link' and 'PoE'.

Link: Indicates network connectivity.
PoE: Indicates if Power over Ethernet is active on the port.

System Indicators:

SYS: System status indicator.
PWR: Power status indicator.

Rear Panel:

The rear panel features an 'AC IN' port for power connection and a 'RESET' button.

AC IN: Standard AC power input connector.
RESET: Button to reset the device to its default settings.

Port Status Summary Table

The following table details the status indicators for the system and ports.

Indicator	Status	Description
SYS	(Solid)	System is operating normally.
PWR	(Solid)	Power is on.
Link (Ports 1-24)	(On)	Link established.
PoE (Ports 1-24)	(On)	PoE is active.
PoE Status (General)	100%	Maximum PoE power budget is utilized.
PoE Status (General)	80%	80% of PoE power budget is utilized.
PoE Status (General)	50%	50% of PoE power budget is utilized.

	Network Switch Port Layout and Indicators Diagram illustrating the port layout and indicator lights for a network switch, detailing 10/100/1000Mbps Ethernet ports and Gigabit Ethernet ports.
	Network Switch Port Configuration and Status Overview This document provides a detailed overview of the network switch's port configuration, including PoE capabilities, link speeds, and status indicators. It also details the function of the Extend Mode and PoE Watchdog features.
	Wall-Mount 19-inch CAT6 Patch Panel - 48 Ports, 2U Detailed information on the wall-mount 19-inch CAT6 patch panel featuring 48 ports, 2U height, UTP connections, and a golden plate with top-entry punch-down blocks for simplified installation.
	User Manual: 2-Port DisplayPort KVM Switch 8K60Hz USB3.0 User manual for the 2-Port DisplayPort KVM Switch with 8K60Hz and USB3.0 capabilities. This guide provides safety information, features, specifications, panel descriptions, connection diagrams, usage instructions, and troubleshooting tips for the KVM switch.
	LEF001-WST-10 Stone Composite Tile Specifications Technical specifications for the LEF001-WST-10 Stone Composite tile, including dimensions, material properties, usage guidelines, and packaging information.
	10 Gallon Fog Unit With Timer Service Manual FG-10N-2-TM Service manual for the 10 Gallon Fog Unit With Timer, model FG-10N-2-TM. Provides safety instructions, maintenance procedures, troubleshooting tips, and detailed assembly diagrams for various components including the tank, back plate, and nozzles.
	Tubular Size and Load Capacity Specifications This document provides specifications for tubular sizes and their corresponding maximum load capacities, including models W3 1/2-5/100 and W5-7/100.
	Network Switch Dimensions and Specifications Detailed dimensions and front/rear panel views of a network switch, including RJ45 ports, SFP ports, and indicator lights. Specifications provided in millimeters and inches.