Carrera GO!!! Hot Wheels 6.4 Slot Car Track Set

Introduction

This document provides assembly and operating instructions for the Carrera GO!!! Hot Wheels 6.4 slot car racing set, model number 20062553. The set is manufactured by Carrera Toys GmbH.

For support and additional information, visit carrera-toys.com.

Package Contents and Track Overview

The image displays all components included in the Carrera GO!!! Hot Wheels 6.4 set. It shows two Hot Wheels branded slot cars, a wired speed controller with a trigger and turbo button, a power supply unit, a power base that connects to the track, and various track pieces. These pieces include straight sections, curved sections, a crossover section, and a loop section with supporting pillars. Also visible are track connectors and small accessories.

• 2x Hot Wheels branded slot cars
• 1x Wired speed controller with turbo button
• 1x Power supply unit
• 1x Power base
• 7x Straight track sections
• 6x Curved track sections
• 1x Loop section with supports
• 1x Crossover section
• Track connectors and accessories

Track length: 6.4 meters (21 feet)

Usable track area: 210 x 93 cm (6.96 x 3.05 feet)

Track Assembly Instructions

This diagram illustrates the assembly of the slot car track. It shows a complete circuit featuring straight sections, several curved turns, a loop-the-loop with support structures, and a lane-changing section. The layout is designed to create a dynamic racing experience.

1. Lay out the track pieces according to the diagram. Connect the straight sections, curves, and the loop.
2. Connect the power base (1a) to the track.
3. Connect the speed controller (1b) to the power base.
4. Assemble the loop supports and attach the loop section.
5. Connect the crossover section.
6. Connect the speed controller to the power supply unit.
7. Place the cars on the track.

Power and Operation

This section details power connections and car preparation. It shows how to connect the power supply unit to the power base, with specific adapters for EU, GB, and USA power outlets. It also depicts attaching the speed controller to the power base. A visual indicates the correct way to insert batteries into a component (though this set uses wired controllers) and shows a comparison of correct vs. incorrect battery installation.

Power Connection: Connect the power supply unit to the power base. Ensure the correct voltage adapter is used for your region (EU, GB, USA).

The diagram also shows how to attach the car's rear spoiler and how to replace rear tires using a small tool, emphasizing correct alignment.

This diagram explains the operation of the speed controller and car performance. It demonstrates how to use the trigger to control the car's speed, with markings for 70% and 100% TURBO. It also illustrates how to adjust the car's guide vane (front part) to optimize its performance on different track sections, particularly around curves and the loop. The visual shows the guide vane being adjusted to be more or less angled.

Operation: Place the cars on the track. Use the speed controller trigger to adjust speed. The trigger position indicates speed, with 70% and 100% TURBO levels shown.

Car Setup: Ensure the car's guide vane is correctly adjusted for optimal performance on the track. Rear tires can be replaced using the provided tool.

Visual Indicators: Correct assembly and operation are indicated by a checkmark symbol (✔️).

Safety Warnings

WARNING: CHOKING HAZARD - SMALL PARTS.

NOT FOR CHILDREN UNDER 3 YEARS.

Carrera vehicles and decorative elements are represented symbolically for instructional purposes only. Refer to the parts list for exact package contents.

Technical and design-related changes are reserved by the manufacturer.