User Manual for Spedal models including: CL796W Smart Multimedia Dashcam, CL796W, Smart Multimedia Dashcam, Multimedia Dashcam, Dashcam

Spedal-CL796W-025B3103-EN

CL796W - Spedal

Spedal

2023-02-25 — Do not operate this product when driving. · Do not install or operate this product with wet hands. · Do not install this product in a place with high ...8 puslapiai


File Info : application/pdf, 8 Pages, 898.52KB

Spedal-CL796W-025B3103-EN
025B3103
SMART MULTIMEDIA DASHCAM
CL796W

Safety Guidelines
Warnings
· Do not operate this product when driving. · Do not install or operate this product with wet hands. · Do not install this product in a place with high tempera-
ture, humidity, flammable, explosive gas or liquid. · Do not install this product in an area that interferes with
the driver's sight or driving safety. · Do not install this product on the airbag cover or within the
working range of the airbag. · Do not leave this product in a closed vehicle with high
temperature for a long time. · Do not operate this product over rated voltage. · Do not use non-original cables and accessories. · Do not use sharp objects such as awls or scissors to cut
this product and its accessories. · Do not disassemble, repair or modify this product and
accessories by yourself. · Do not install, use or place this product within the reach of
children under the age of 16.
Precautions
· Do not press the lens too hard to avoid damage or dislocation of the lens.
· Do not directly touch the lens surface, so as not to affect the recording effect.
· Do not remove the memory card during the shutdown process to avoid file damage.
English 01

· When using the memory card for the first time, please format it on this product to ensure stable reading and writing.
· When not using the product for a long time, please pull out the memory card to ensure the performance of the memory card.

Preparations For Product Use

Products And Components

 CL796W

 Camera

 Suction Bracket  Power Cable

 USB-A To USB-C Cable

 Audio Cable

 Camera Cable  TF Card

English 02

 Dashboard Pad  Non-slip Mat Mounting Disk

 User Manual

Note Do not use non-original cables and components. Gifts and components are not covered under warranty. The package contents of this product are subject to change without prior notice, and the actual package contents shall prevail.
Product Introduction
Screen

USB-C Port AV IN Port

TF Card Slot AUX OUT Port

Power Button English 03

Installation Guide  TF Card Installation
· Insert the TF card into the TF card slot. · Please use the TF card that comes with this product. The
self-provided TF card should meet the following require ments: Class 10 or above, the capacity does not exceed 128GB.
 Suction Bracket Installation 1. Align the suction bracket clips with the holes on the back of the device and push them up to secure the bracket. 2. Thoroughly clean and dry the car dashboard surface, remove dust or debris, and make sure the surface is flat. 3. Remove the 3M adhesive release paper from the dashboard pad mounting disk and adhere it to a clean instrument panel surface. 4. Allow to sit for 3 hours or more to ensure a strong bond. Then remove the protective film from the dashboard pad. 5. Tear off the protective film from the suction bracket, place the suction cups firmly in the center of the dashboard pad mounting disk, and press the lock button. 6. Adjust the angle of the device screen.
English 04

Note The installation position of equipment and brackets should not block the driver's sight and affect driving safety.
 Device Installation Insert the power cable into the car cigarette lighter, and connect the other end to the power interface of the device.
English 05

 Camera Installation 1. Tear off the protective film of the camera lens. 2. Peel off the 3M adhesive release paper from the camera
mount, attach the camera to the windshield, and press firmly to secure it. 3. Connect the device via the camera connection cable. 4.Adjust the angle of the camera lens.
 Audio Cable Installation 1. Insert the audio cable into the car AUX port, and connect
the other end to the AUX OUT port of the device. 2. Set the car's audio input mode to AUX audio input. After
the connection is successful, you can play music, navigation, calls and more through your car's audio system.
English 06

more product information www.spedal.cc
more product videos youtube search spedal
For any questions please contact support@spedaltech.com



References

Adobe PDF library 16.03 Adobe Illustrator(R) 24.0