Safety Instructions

IMPORTANT SAFETY INSTRUCTIONS

SAVE THESE INSTRUCTIONS

READ THIS ENTIRE DOCUMENT PRIOR TO OPERATING CRICUT EASYPRESS™ 2.

For more safety and compliance information go to www.cricut.com/safety

Key:

! HOT SURFACE: Ceramic plate and stand are hot while in use.

CAUTION: Use as directed. Hot surfaces may scorch or burn.

Safety Instructions:

CAUTION

HOT SURFACE

DO NOT TOUCH

WARNING: This Cricut EasyPress 2 (Device) operates at high temperatures that can cause burns or other injury. Use with extreme caution.

CAUTION: Risk of electric shock. Do not open, modify, or otherwise tamper with Device.

Always turn Device OFF before plugging or unplugging from the electrical outlet. Never pull on the cord to disconnect Device from the electrical outlet; instead, grasp the plug and pull to disconnect Device.

Save these instructions.

Do not immerse in water or use in wet conditions.

Cricut EasyPress 2 is intended for household and indoor hobby use only:

This Device is not intended for use by persons (including children) with reduced physical, sensory or cognitive capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of Device by a person responsible for their safety. Children should be supervised to ensure that they do not play with Device. If the power cord is damaged, do not operate Device. The power cord should be positioned so that it will not drape over the countertop or tabletop where it can be tripped over, snagged, or pulled on unintentionally (especially by children). Use care not to allow the cord to touch the heated surface. Coil the cord loosely in the handle area when storing.

Do not operate if Device is damaged.

CAUTION: To provide continued protection against risk of electric shock, connect to properly grounded outlets only. Extension cords used with Device should be properly configured and capable of carrying the electrical load.

Auto shutoff occurs after 10 minutes of inactivity, after pushing any button, or after the timer beeps. If Device has to cool to reach a lower temperature, the auto shutoff 10-minute countdown starts after Device has reached the set temperature. This may take additional time.

WARNING: This Device must be placed on its stand when not in use.

WARNING: Accessible parts may become hot during use. Young children should be kept away.

SAVE THESE INSTRUCTIONS

MODEL: CHP132F2, CHP132G2, CHP13212, CHP182F2, CHP182G2, CHP18212

RATING: 220-240V 50/60 Hz 1150W

MODEL: CHP222F2, CHP222G2, CHP22212

RATING: 220-240V 50/60 Hz 1350W

Models: Easy Press 2 Heat Press Machine, Easy Press 2, Heat Press Machine, Press Machine, Machine

PDF preview unavailable. Download the PDF instead.

EasyPress-2-EU-User-Manual macOS Version 11.3.1 (Build 20E241) Quartz PDFContext

Related Documents

Preview Cricut EasyPress Welcome Booklet: Your Guide to Heat Transfer Success
Welcome to the Cricut EasyPress! This guide covers everything from unboxing and controls to application tips, project ideas, and a comprehensive time and temperature chart for perfect iron-on transfers.
Preview Cricut Information Manual: Smart Cutting Machines and Crafting Tools
Explore the world of Cricut smart cutting machines, heat presses, and accessories. This comprehensive guide introduces users to Cricut's innovative products, detailing their features, capabilities, and the vast creative possibilities for DIY enthusiasts and crafters.
Preview Cricut Kickoff Transcript: Lesson Two - Explore and Venture Tools, Mats, and Materials
Dive into Cricut Kickoff Lesson Two, a comprehensive transcript detailing the tools, blades, mats, pens, and materials for Cricut Explore and Venture machines. Learn setup and usage tips from Jennifer Maker to maximize your crafting potential.
Preview Cricut Orientation and Digital Fabrication at Harris County Public Library
An overview of Cricut machines, Design Space software, digital fabrication, and maker space resources available at Harris County Public Library, including project ideas, usage policies, and how to get started.
Preview Cricut Machine Tearing or Dragging Material Troubleshooting Guide
Troubleshoot common issues with Cricut machines tearing or dragging material. This guide provides step-by-step solutions for Cricut Maker, Explore, and older models, covering settings, blade, mat, and pressure adjustments.
Preview Troubleshooting Unusual Noises for Cricut Machines
A comprehensive guide to diagnosing and resolving unusual noises encountered with Cricut crafting machines, including grinding, loud operation, and specific model issues. Provides step-by-step troubleshooting for Cricut Maker, Explore, Expression, and other models.
Preview Cricut Getting Started Guide: Explore Air 2 & Maker Setup and Usage
Learn to use your Cricut Explore Air 2 or Cricut Maker with this comprehensive getting started guide. Covers machine setup, Design Space software, tools, mats, blades, and your first project. Perfect for beginners.
Preview Cricut Dial Not Working Troubleshooting Guide
Troubleshooting steps for Cricut machines when the dial is not working or the material is not changing in Design Space. Covers Explore series and older machines.