STREETZ CM763, CM764, CM769

Product Overview

This manual provides instructions for the STREETZ CM763, CM764, and CM769 Bluetooth speakers. It covers setup, operation, safety, and advanced features like True Wireless Stereo (TWS).

Product Features

• Microphone
• Power on/off and Voice Assistant
• Volume control and song selection
• Play/pause/answer/end call/TWS functionality
• Mode button for switching audio input (3.5mm/Bluetooth)
• Bluetooth LED indicator
• Charging LED indicator
• USB Micro-B charging port
• 3.5mm audio input port

Safety Instructions

• Use only 5V certified chargers to avoid damage.
• Do not open or attempt to repair the speaker yourself.
• Keep the speaker away from high temperature sources.

Speaker Battery and Charging

The speaker has a built-in rechargeable battery. Charge the battery using the provided USB cable connected to a USB port on a computer or a USB charger. The charging LED indicates the charging status.

Bluetooth Connectivity

• Bluetooth range is up to 10 meters. Obstacles may reduce the range.
• Keep the device away from other electronic devices that may cause interference.

Operation

Power Button

Press and hold the power button for approximately 3 seconds to turn the speaker on or off. A quick press activates the voice assistant (Siri, Google Assistant, Huawei Voice Assistant). The speaker will automatically turn off after 10 minutes of inactivity.

Connecting the Speaker

1. Turn on the speaker and your device.
2. Search for Bluetooth devices on your device and select the speaker from the list.
3. A confirmation sound and static Bluetooth LED indicate a successful connection.
4. Only one Bluetooth device can be connected at a time.

Disconnecting the Speaker

Disconnect the Bluetooth connection from your device or press and hold the mode button for 3 seconds.

Reconnecting the Speaker

Some devices support automatic reconnection. If not, press and hold the mode button to connect to the last disconnected device.

Play Button

• Short press: Play/pause, answer/end call.
• Double press: Redial last call.

Volume and Song Control

• When listening to music:
• Short press '+' to increase volume, '-' to decrease volume.
• Long press '-' for previous song, '+' for next song.
• During a call: Short press '+' to increase volume, '-' to decrease volume.

Audio Cable Connection

Connect the speaker to your device using a 3.5mm audio cable. Use the mode button to switch between 3.5mm and Bluetooth.

Hands-Free Operation

When a call is incoming, a ringtone will play. Short press the play button to answer. Speak through the speaker's microphone when hands-free is active.

True Wireless Stereo (TWS)

This speaker supports TWS functionality, allowing two speakers of the same type (CM763/CM764/CM769) to pair and function as a 2.0 wireless stereo system.

Connecting Speakers (TWS)

1. Turn on both speakers, ensuring they are not connected to any Bluetooth device.
2. Press and hold the Play/Pause button on one speaker for about 2 seconds until a tone is heard.
3. Release the button. The speakers will pair automatically. A flashing LED indicates the primary/left speaker, and a solid LED indicates the right speaker.
4. Pair the speakers with your phone via your device's Bluetooth menu. The speaker will appear as a single device.

TWS Notes

• Play/pause, volume, and song selection can be controlled from either speaker.
• Speakers will automatically pair if they were paired before being turned off.
• If automatic pairing fails, connect manually (steps 1-4). If your device is connected to both speakers without them being paired, disconnect your device from one speaker first to enable pairing.

Disconnecting (TWS)

Press and hold the Play/Pause button on one speaker for about 2 seconds until a tone is heard.