GIO warm Portable Baby Bottle Warmer User Manual

Overview

The innoGIO GIO warm is a portable baby bottle warmer designed for convenient warming of milk and water.

What's in the box:

• Dust Cover
• Sealing Ring
• USB Charging Cable
• Bottle Warmer Motor
• User Manual
• Adapters

Description of LED Display and Button Function

LED Display:

• 1: Milk warming mode / Battery display
• 2: Battery indicator
• 3: Power button

Button Function:

• Power Button: Press and hold for 2 seconds to turn on/off. Short press to change warming mode or night light.

Assembly Instructions

1. Remove the bottle warmer dust cover.
2. Install the L-shaped seal, aligning it with the groove of the bottle warmer and the bottle interface, and push down until it reaches the bottom.
3. Align the adapter and feeding bottle with the groove of the bottle warmer and the feeding bottle interface, and tighten with moderate force.
4. Fill the bottle with plain water or breast milk at room temperature, turn the body of the bottle warmer upside down, and then tighten it.

Operation Instructions

1. To turn on, press and hold the power button [power-symbol] for 2 seconds. The buzzer will sound once, and the default warming to 37°C will start.
2. Continue to press and hold the button for 2 seconds to convert between Celsius (°C) and Fahrenheit (°F) display. The temperature is displayed in real-time during heating.
3. Celsius Mode: Short press the power button [power-symbol] to cycle through available temperatures: 37°C, 40°C, 45°C, 50°C. The buzzer sounds once per press, and the selected heating temperature is displayed in real-time after 2 seconds. After warming, it enters the keep-warm state.
4. Fahrenheit Mode: Short press the power button [power-symbol] to cycle through available temperatures: 99°F, 104°F, 113°F, 122°F. The buzzer sounds once per press, and the selected heating temperature is displayed in real-time after 2 seconds. After warming, it enters the keep-warm state.
5. Thaw Mode: If the milk temperature is ≤15°C when turned on, the device automatically switches to thaw mode. The temperature is displayed in real-time. Thawing is completed when the temperature reaches 30°C, after which it switches to 37°C mode. Selecting milk warming mode during thawing will stop the thaw process.
6. Night Light: Short press the power button [power-symbol] twice to turn the night light on or off.
7. Turning Off: When finished, press and hold the power button [power-symbol] for 2 seconds to shut down the device.

Battery and Charging

Battery Display: When the device is switched off, press and hold the power button [power-symbol] to display the battery level percentage. When the battery level falls below 20%, the display will briefly show "LO". We recommend using a certified PD fast charger. If "LO" flashes, charge the device without delay. The device will automatically switch off after 6 seconds of "LO" flashing.

Charging: When the device is charging while turned off, the display shows battery percentage using flashing bars (1 bar flashing, 2 bars flashing, 3 bars flashing, full 3 bars always on). The battery percentage must be over 50% to use the device while charging.

Low Battery Warning: When the power display falls below 20%, the display shows "LO". After 2 seconds, the device switches to display the current temperature. The power continues to decrease to the programmed value, and the buzzer sounds 2 times. The device will automatically switch off.

Cleaning

• Clean the bottle warmer before and after each use.
• Unplug the USB charging cable and shut down the device.
• Clean the stainless steel parts on the top of the motor and the waterproof sealing ring. Allow them to dry.
• Wipe parts clean with a soft cloth. Be careful not to lose the sealing ring.
• Repeat cleaning steps after warming milk.

Descaling

It is recommended to descale the bottle warmer every month to ensure efficiency.

• Descale with a mixture of white vinegar and cold water. Turn on the heating function, then turn off the bottle warmer after 5 minutes. Leave the solution until limescale dissolves.
• Thoroughly clean and dry the stainless steel bottle, dust cap, sealing ring, and adapter.
• Citric acid descaler can also be used. Do not use other types of descalers.

White Spots: White spots inside the bottle warmer are limescale deposits, which are hazardous to health. Use pure or distilled water to avoid limescale. If limescale appears, follow the descaling procedure.

Cautions for Use

• The product must be used under adult supervision.
• No parts should be used as toys. Keep unused parts out of reach of children.
• Actual heating time is affected by ambient temperature, bottle material, baseline temperature, and milk quantity.
• Do not touch the hot stainless steel parts during operation to avoid burns.
• Working environment: 10°C to 35°C.
• Do not use aggressive detergents or antibacterial cleaners, as they can cause plastic parts to crack. Replace cracked parts immediately.
• Wash hands thoroughly and ensure surfaces are clean before touching disinfected components.
• Do not place the device in direct sunlight, near heat sources, or disinfection solutions for extended periods when not in use, as this may reduce its service life.
• Breast milk should not be heated for too long. After reaching the specified temperature, keep milk warm for no more than half an hour, as milk is perishable and can become unsuitable for consumption and health after longer periods.
• Always check milk temperature before feeding by testing a few drops on the back of your hand or wrist.
• Heating times provided are reference values for specific conditions.
• Match the product with an adapter meeting local safety requirements (e.g., Input: 100-240V~50/60Hz~0.45A Output: 5.0V⁰2A).
• Avoid using the product in environments with strong static electricity or magnetic fields, which could damage the battery protection device and cause a safety hazard.
• Unplug the device when fully charged; prolonged charging may lead to fire or other safety incidents.

Dry Boil Protection

If the stainless-steel part is not filled with a bottle containing breast milk or water, a dry boil alarm will be triggered. A long buzzer sounds for 1 second, and the display will show "01".

Dry Boil Alarm with Water: When adding hot water, wait 10-30 seconds before turning on the device to avoid a temperature difference that could trigger the dry boiling mode.

Bottle Compatibility

The GIO warm is designed to be compatible with various bottle brands. A sealing ring is included, which can be used in two orientations (U-shape up or down) to fit different bottle shapes.

Heating Time Reference

The following data are laboratory data for milk heated to 40°C and are intended for general reference only. Actual heating times may differ based on environmental conditions.

Keep Warm Function

The device can maintain a temperature of 40°C for up to 12 hours.

Note on Milk: While the device can keep milk warm, it is recommended not to exceed half an hour, as milk is perishable and can become unsuitable for consumption and health after longer periods.

Troubleshooting and FAQs

Can I use this product to keep water / milk warm all night?

You can use this product to keep water warm overnight. For milk, it is suggested to keep it warm for less than half an hour due to its perishable nature.

What is the best water temperature for babies?

• 37°C-40°C for protein powder/probiotics.
• 40°C-45°C for milk powder and drinking water.

Why is the heating time longer at lower ambient temperatures?

A lower ambient temperature results in a lower initial water temperature, which consequently requires a longer heating time.

Why is the dry boil alarm on when there is water in the bottle?

When adding hot water, wait for 10-30 seconds before turning on the device. This prevents a significant temperature difference between the water and the device, which could falsely trigger the dry boiling mode.

Importer Information

Importer: INNOGIO sp. z 0.0.

Address: Ostródzka street 74H, 03-289 Warsaw, Poland

Website: www.innogio.com

Social Media: f@innoGIO.official, @innogio_com

Certifications: CE ROHS