BLACK SHARK Lucifer T14 Wireless Earbuds
Thank you for purchasing the BLACK SHARK Lucifer T14 Wireless Earbuds. Please read this manual carefully and keep it for future reference. If you need any assistance, please contact the Black Shark support team with your product model number and Amazon order number.
Package Contents
BLACK SHARK Lucifer T14
The package includes the BLACK SHARK Lucifer T14 wireless earbuds and their charging case. Each earbud features a touch control surface, a pressure vent, and an ultra-clear microphone. The earbuds are marked 'L' for left and 'R' for right.
Charging Case and Cable
The charging case houses the earbuds and provides charging. It features battery indicators, a case button, and a USB-C charging port. The package also includes a USB-C charging cable.
Specifications
| Specification | Details |
|---|---|
| Model | BS-T14 |
| Bluetooth Version | Bluetooth 5.0 |
| Transmission Distance | ≤ 10 m |
| Driver Size | 13 mm x 2 |
| Frequency Response | 20 Hz -20 kHz |
| Battery Capacity | 35 mAh x 2 (earbuds), 300 mAh (charging case) |
| Charging Time | 1.5 h |
| Play Time | 4 h (A total of 16 h with the charging case) |
| Charging Type | USB-C |
| Casing Material | ABS, PC |
| Cable Material | PVC |
| Cable Length | 0.3m |
| Compatibility | Devices with Bluetooth audio capability |
| Supported Codecs | SBC, AAC |
Getting Started
Charging Your BLACK SHARK Lucifer T14
For first-time use, connect the charging case (containing the earbuds) to a USB port via the charging cable and wait until your Lucifer T14 is fully charged. For subsequent use, the charging case and earbuds can be charged independently.
Battery Indicator for the Charging Case
When Plugged In
| Indicator | Status |
|---|---|
| Flash ☀️ | Charging |
| Static ? | Fully charged |
When Unplugged
| Indicator | Status |
|---|---|
| Flash ❄️ | Battery <10% |
| Static ⚪ | Battery >10% |
Note: Open the case to check the power. When the power is less than 10%, the indicator flashes in white (static white when more than 10%); it goes out after 8 seconds. If the case is closed, the indicator goes out immediately.
Earbud Charging Indicators
| Indicator | Status |
|---|---|
| Flash ❄️ | Earbuds in |
| Flash ❄️ | Earbuds out |
| Flash x1 ❄️ | 1 earbud charging |
| Flash x2 ❄️ | 2 earbuds charging |
Note: No indicator prompt if earbuds are not on charge.
Pairing to a Mobile Device
When connecting your Lucifer T14, keep it within a meter (1m) of your mobile device.
- Simply open the case to enter pairing mode. You will hear "Power on" while the earbuds are powered on and enter pairing mode.
- Enable Bluetooth on your mobile device and select “Black Shark Lucifer T14” from the list of devices found.
- Wait for pairing to complete. You will hear 2 dong sounds while the earbuds auto-pairing was successful.
Note: If the earbuds fail to connect to your audio source, they will stay in search mode for up to 5 minutes before powering off. Repeat the steps to pair again.
Once paired, the earbuds will automatically try to connect to the paired mobile device each time the charging case is opened or the earbuds are powered on.
Power On/Off
To power off the device, return the earbuds to the charging case and close it. The earbuds will power back up when you open the case or hold both touch controls for 3 seconds.
Using the Left/Right Earbud Only
Simply take the left or right earbud out only and connect it to your device. There is no prompt when using one side earbud only.
Touch Controls for Earbuds
| Function | Action | Audio Prompt |
|---|---|---|
| Power On | Open the case / Hold both touch controls for 3 seconds | "Power On" |
| Power Off | Place the earbuds back in the case and close it | None |
| Automatic shut-down | Fail connected to the device for 5 minutes / low power | "Power Off" |
| Pairing | Open the case | 2 dong sounds |
| Connected | Open the case | "Connected" |
| Standby | None | None |
| Disconnect | Disconnect via the connected device | "Disconnected" |
| Voice Assistant | Hold the L/R touch control for 3 seconds | 1 beep sound |
| Answer a call | Double tap the L/R touch control | Ringtone: 4 beep sounds |
| End a call | Double tap the L/R touch control | 1 beep sound |
| Reject a Call | Hold the L/R touch control for 2 seconds | None |
| Play/Pause | Double tap the L/R touch control | None |
| Previous Track | Triple tap the left touch control | None |
| Next Track | Triple tap the right touch control | None |
| Battery Low | None | "Please Charge" |
| Force pairing | Quintuple tap both touch control and wait 15 seconds | 2 dong sounds |
Safety Information
Avoid Hearing Damage
Using the earbuds at a high volume for a long time may cause permanent hearing loss. To reduce this risk, keep the volume at a safe and comfortable level.
Traffic Security
To reduce the risk of accidents, always pay full attention while driving. Using a device while driving, even with a hands-free kit, distracts you and can cause an accident. Follow local driving laws and regulations while using this device.
Interference with Medical Equipment
This device may cause medical equipment to malfunction. Therefore, follow all rules and regulations of hospitals and health care facilities. Do not use your device in prohibited areas. Some wireless devices may affect the performance of hearing aids and pacemakers. Consult your service provider for more information. Pacemaker manufacturers advise keeping a minimum distance of 15 cm between a mobile device and pacemaker to prevent potential interference. It is recommended to hold the device opposite the pacemaker, and not to carry the device in your front pocket.
Battery
This product contains a lithium-ion battery. WARNING! There is a risk of explosion if the battery is replaced by an incorrect type. Do not attempt to remove, open, crush, puncture, short circuit, dispose of in fire or water, or expose the battery to temperatures higher than 40°C. Dispose of used batteries according to local regulations.
Your device's battery is built-in and non-removable. The battery can be replaced only by an authorized service partner, whose contact information can be found on the Warranty card.
The operating temperature of the device is -15 to 55°C. Avoid environments that are dusty, damp, dirty, or have magnetic fields. Keep the device away from extended-period direct sunlight, extreme heat/cold, fire, microwave, or high-pressure containers. Such environments may damage your device or accessories.
[crossed-out-bin-symbol] Correctly dispose of this product. This icon indicates that this product should not be disposed with other household wastes throughout the EU. To prevent the environment or human health from being damaged due to uncontrolled waste disposal, recycle responsibly to promote the sustainable reuse of material resources. To safely recycle your device, use return and collection systems or contact the retailer from whom you purchase the device.
Warranty & Customer Support
For questions, support, or warranty claims, please contact Black Shark through the region-specific email addresses provided below. Please include your Amazon order number and product model number.
- Amazon US orders: support.us@blackshark.com
- Amazon EU orders: support.eu@blackshark.com
- Amazon CA orders: support.ca@blackshark.com
- Amazon JP orders: support.jp@blackshark.com
For more information, please check on global.blackshark.com.
Join Black Shark at global.blackshark.com.
Like Black Shark on Facebook at facebook.com/BlackSharkGlobal.
Follow Black Shark on Twitter at twitter.com/blckshrk_global.
Manufacturer: Blackshark Technologies (Nanchang) Co., Ltd.
Registered Address: Room 815-1, 8th floor, Block A, Huajiang Building, NO.1 Tsinghua Science Park, NO.299, Yupingdong Street, Nanchang Economic and Technological Development Zone, Nanchang City, Jiangxi Province, 330013, CN
FCC ID: 2A2JO-BST1
IC: 27499-BST14
[CE-logo] [recycle-symbol] R210-163772 [RoHS-logo Made in China]
