User Guide for AX TECHNOLOGIES models including: PUPSPEAKER, 2AJXA-PUPSPEAKER, 2AJXAPUPSPEAKER, PUPSPEAKER Mini Bluetooth Speaker, PUPSPEAKER, Mini Bluetooth Speaker, Bluetooth Speaker, Speaker
AX Technologies LLC PUPSPEAKER Mini Bluetooth Speaker 2AJXA-PUPSPEAKER 2AJXAPUPSPEAKER pupspeaker
PUPSPEAKER Mini Bluetooth Speaker by AX
File Info : application/pdf, 1 Pages, 1.63MB
DocumentDocumentMini Bluetooth Speaker QUICK START GUIDE Mini Bluetooth Speaker æSpeaker èMicrophone ê Strap Hole çIndicator Light é Main Button ë Micro Charging Port OPERATING INSTRUCTIONS Charging the battery 1. Insert the charging cable into the Micro USB input port, connect the USB plug into a USB power terminal ,the LED indicator will turn red. 2. After charging is complete, the red LED indicator will turn off. Bluetooth Pairing for Music/Phone Calls/Remote Camera 1. Turn on the speaker by holding the Main Button for 3 seconds. The blue indicator will start flashing and a voice prompt will indicate that Bluetooth pairing is ready. 2. Activate your phone or other device's Bluetooth function. 3. Search and connect to the Bluetooth speaker, named "Mini Pup"Once the two devices are connected, the LED indicator will remain blue and a voice prompt will indicate a successful connection. Note:In addition to playing music, the Bluetooth speaker can be used to answer phone calls by clicking the Main Button. USING YOUR SPEAKERS Controll the speakes by using the main button on the bottom of the speakers Click:Play/Pause(Playing music) Answer/Hang up(In a phone call) Capturing(Camera Mode) Double Click: Redial last phone call Long click for 3 seconds: Turn on/Turn Off CHARGING Working Time: 2-3 Hours Charging Time: 1-2 Hours(Via Micro USB Cable) Note:When speakers in pairing mode,it will power off in 5 minutes later after the speaker did not connected any devices. LED LIGHT INDICATOR Paring Mode: Flashing BLUE Playing Music: Slow flashing BLUE Charging via Micro Cable: RED LED Light Device Connected: BLUE LED Light Full Charged: No LED Light (Light Off) Parameter of Speakers: Product: Mini Bluetooth Speaker Model: ITSPK34007-087 Bluetooth Version: V5.0 Input: 5V/500Ma Power Output: 3W Battery Charging Time: 1-2 hours Play Time: 2-3 hours Impedance: 43W Rechargeable Battery: 3.7V/350mAh (Built-In) REGULATORY NOTICE This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protec on against harmful interference in a residen al installa on. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instruc ons, may cause harmful interference to radio communica ons. However, there is no guarantee that interference will not occur in a par cular installa on. If this equipment does cause harmful interference to radio or television recep on, which can be determined by turning the equipment o and n, he u er is encouraged to try to correct the interference by one or more of the following measures: · Reorient or relocate the receiving antenna. · Increase the separa on between the equipment and receiver. · Connect the equipment into an outlet on a circuit di erent from that to which the receiver is connected. · Consult the dealer or an experienced radio/TV technician for help. Changes or modi ca ons not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Opera on is subject to the following two condi ons: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired opera on. This equipment complies with FCC RF radia on exposure limits set forth for an uncontrolled environment. This device and its antenna must not be located or operated in conjunc on with any other antenna or transmier. FCC ID : 2AJXA-PUPSPEAKERTodd Emerson Adobe PDF library 15.00