mailto:support@intellitronix.com
Intellitronix | digital gauges | Eastlake, OH, United States
Installation Guide for Intellitronix models including: M9123G LED Digital Outside Air Temperature Gauge, M9123G, LED Digital Outside Air Temperature Gauge, Digital Outside Air Temperature Gauge, Outside Air Temperature Gauge, Air Temperature Gauge, Temperature Gauge, Gauge
Buy Intellitronix M9123G, LED Digital Outside Air Temperature Gauge, Green - Prime Buy
File Info : application/pdf, 2 Pages, 178.02KB
DocumentDocumentMade in America Lifetime Guarantee Thank you for purchasing this instrument from Intellitronix. We value our customers! INSTALLATION GUIDE Outside Air Temperature Gauge Part Number: M9123 * Always disconnect the battery before attempting any electrical work on your vehicle.* KIT COMPONENTS One (1) Outside Air Temperature Gauge One (1) Temperature Sending Unit (S8414) Mounting Hardware * Bezel, "Smoked" Acrylic, Housing, Nuts, Bolts, Bracket WIRING INSTRUCTIONS Note: Automotive circuit connectors are the preferred method of connecting wires. However, you may solder if you prefer. (GAUGE) Ground - Black Wire directly to the engine block. Power - Red Wire to a switched +12V source (ignition circuit). Temperature - Blue Wire to the blue wire of the temperature sensor. (M8014) Dimmer - Purple Wire to the headlight circuit to dim the LEDs 50% when the headlights are on. Do not connect to the dash light rheostat control wire or the dimming feature will not work properly. Alternatively, connect to an electric ground (such as the engine block) for permanent, maximum brightness. (SENSOR) Ground - Black Wire directly to the engine block. Power - Red Wire to a switched +12V source (ignition circuit). Temperature - Blue Wire to the blue wire of the temperature gauge (M9123). # # #