NIVIAN 2-WIRED VIDEO INTERCOM - Quick Guide
Model: NV-VIDEOINTERCOM-2-BASIC
Welcome to the NIVIAN Universe
Thank you for your confidence in NIVIAN products. Founded over 10 years ago, Nivian aims to enhance your peace of mind by providing simple and effective security and supervision for your home or business.
Access More Information
Become an expert in Surveillance and Smart Home!
- ? User Manual: Detailed information on settings, features, and usage. Find it via QR code.
- ? NIVIAN HOME WEB: Your resource for all your needs. Visit: https://www.nivianhome.com/
Support and Customer Service
❓ Have Questions? We're here to help!
- Contact us via the "Contact" section on our website.
- Email: support@nivianhome.com
Like our product? Share your experience by leaving a review.
Follow us on SOCIAL NETWORKS for video tutorials, tips, and more:
- ▶️ YouTube
Video Door Entry System Installation
Follow this quick guide for proper installation and testing. For detailed instructions, download the complete product manual.
? PRO TIP! Make all temporary connections between the indoor monitor and the outdoor panel for correct initial configuration.
1. General Connection Diagram
Indoor Monitor (Back View): Features terminals for Power, TV-OUT, CHIME, GND, 18V, VIDEO, DATA, DOOR1, DOOR2, VCC, ALARM, CAM1, CAM2.
Outdoor Unit (Front View): Includes camera and speaker/microphone.
Wiring Connections: Shows connections for power supply, chime, door locks (DOOR1, DOOR2), cameras (CAM1, CAM2), and door lock control. Specific terminals are labeled for GND, 18V, DATA, NO, COM, NC, VCC, VIDEO, ALARM.
2. Install Monitor and Door Station in Their Final Location
If replacing an old intercom, a cable may already be installed. You can use the existing cable or install a new 2-wire cable. Select a wire pair from the cable behind your headset and find the corresponding wires at the front door. Plug the monitor's power supply into a nearby wall outlet.
3. Connect Door Station to Your Electric Lock
3.1 If an Electric Lock Exists
Most doors have an existing electric lock, usually NO type (normally open) with its own power supply. Connect the two wires from the lock to the NO and COM terminals of the door panel.
3.2 If it is a New Electric Lock
For a new electric lock, you can use the power supply from the video intercom. Connect the NO and GND contacts directly to the electric lock, and connect the COM and VL+ cables (no separate power supply needed).
4. Button Description (Indoor Monitor)
The indoor monitor features several buttons for operation:
- Standby Mode: Press [menu icon] to enter the main menu.
- Main Menu: Press [confirm icon] to confirm.
- Talking/Monitoring Mode (Recording): Press [record icon] to stop recording, press again to start a new recording.
- Talking/Monitoring Mode (Snapshot): Press [snapshot icon] to take a picture.
- Transfer Button: Initiate an intercom call or transfer calls to another indoor unit.
- Monitoring Button: View door and camera images.
- Talk Button: Initiate a call.
- Unlock Button: Press to unlock the door lock connected to the door station (during call or monitoring) or to unlock the lock connected to the indoor monitor (when monitoring CAM1 or CAM2).
- Hang Up Button: End a call.
- Volume Button: Adjust talking volume. Use the idler wheel: Up for "+", Down for "-".
- Capture Button: Press to capture a still frame of the current video stream.
- Recording Button: Press to start or stop manual recording.
- Indoor Monitor Unlock Button: Press to unlock the indoor unit from any interface.
Risk Information
- Keep away from heat sources and flammable products. Do not cover the product during operation. Avoid aggressive or corrosive products.
- Ensure your electrical installation complies with regulations. Faulty installations can cause faults or fires. Do not use damaged power supplies or cables.
- Do not tamper with, apply pressure to, or disassemble the product. This voids the warranty and risks electric shock. If the product malfunctions (smoke, odor, noise), disconnect power and contact customer service.
- This product, accessories, and packaging are not toys. Keep away from children and animals.
Declaration of Conformity
Product manufactured in P.R.C. This product complies with applicable harmonized European standards (Directives: 2014/53/EU, 2014/30/EU, 2011/65/EU, 2012/19/EU, 2006/66/EC). All company, brand, and product names are registered trademarks. ©2018 Long Xian Import Export S.L. All rights reserved. Products marked with the WEEE symbol must be recycled properly.
Compliance Marks: CE, RoHS COMPLIANT, FC, Ⓒ, ♻️ WEEE symbol.
Limited Warranty
For 24 months from the date of first purchase, Long Xian Import Export S.L. is responsible for conformity defects at the time of delivery, according to local, state, and community legislation. Additional rights may exist depending on the country or region. You can also exercise this warranty at the place of purchase. This warranty does not apply if defects are caused by misuse, negligence, or unauthorized use. Proof of purchase is required. Warranty is valid for the European Union; consult local legislation for other countries.
User Responsibility
Proper configuration of passwords and security settings is crucial. The company is not liable for damages resulting from improper configuration. This security system offers limited reliability for event detection and is not a guarantee of protection. The company is not liable for damages or losses related to product use, except for guaranteeing its functionalities. Improper use is not covered. Product specifications and manual contents are subject to change without notice.
