Skyworth HD TV Stick Leap-L1 User Guide

Welcome

This guide provides instructions for setting up and using your Skyworth HD TV Stick Leap-L1.

Getting Started: Setup Steps

Follow these steps to set up your TV Stick:

1. Power On: Connect the TV Stick to your TV and power it on.
2. HDMI Input: Select the correct HDMI input source on your TV.
3. Network Connection: Ensure your Wi-Fi router is near the TV Stick and that an internet connection is available.
4. Remote Pairing: Pair the remote control by pressing and holding the '+' buttons for 5 seconds. Keep the remote close to the TV Stick during pairing.
5. Setup Method: Choose to set up your TV using an Android phone or tablet, or follow the step-by-step instructions with the remote control.
6. Language Selection: Select your preferred language from the on-screen options.
7. Google Assistant: Use the ?️ Google Assistant button on your remote to interact with Google.
8. Google Play: Access a wide range of apps and games from the ▶️ Google Play store.

Remote Control Features

The remote control allows you to navigate menus, control playback, and access features like Google Assistant.

• Press the ?️ Google Assistant button to talk to Google.
• To pair the remote, press and hold the '+' buttons for 5 seconds while keeping the remote near the TV Stick.

Technical Specifications

This section details the wireless frequency bands and power output for the device.

Note on 5GHz Wi-Fi: The functions of Wireless Access Systems, including Radio Local Area Networks (WAS/RLANs) within the band 5150-5350 MHz, are restricted to indoor use only in all European Union countries (BE/BG/CZ/DK/DE/EE/IE/EL/ES/FR/HR/IT/CY/LV/LT/LU/HU/MT/NL/AT/PL/PT/RO/SI/SK/FI/SE/TR/NO/CH/IS/LI/UK(NI)).

Safety and Compliance Information

Important Warnings

• Only use attachments/accessories specified or provided by the manufacturer. Any other adapter may cause damage not covered under warranty.
• To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture. Do not place liquid-filled objects on the apparatus.
• Ensure ventilation openings are not blocked.
• Batteries shall not be exposed to excessive heat such as sunshine or fire.
• The mains plug or adapter is used as the disconnect device and shall remain readily operable.
• CAUTION: Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type.
• The equipment is Class II or double insulated and does not require a safety connection to electrical earth.
• The ⚡ arrowhead symbol within an equilateral triangle alerts users to the presence of non-insulated "dangerous voltage" within the enclosure.
• Warning: To reduce the risk of electric shock, do not remove the cover. Refer servicing to qualified personnel.
• The ⚠️ exclamation point within an equilateral triangle alerts users to important operating and maintenance instructions.

Operating Environment

Do not install this equipment in confined spaces, near damp or cold areas, or expose it to direct sunlight or dust. Keep away from open flames or flammable materials.

WEEE Directive

♻️ WEEE Directive: This marking indicates that the product should not be disposed of with other household wastes throughout the EU. To prevent possible harm to the environment or human health from uncontrolled waste, please use return and collection systems or contact the retailer for environmentally safe recycling.

FCC Statement

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. If interference occurs, users are encouraged to try correcting it by reorienting the antenna, increasing separation, or consulting a dealer or technician.

Operation is subject to two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation.

FCC Radiation Exposure Statement: This equipment complies with FCC Radiation exposure limits set forth for an uncontrolled environment. It should be installed and operated with a minimum distance of 20cm between the radiator and your body.

Legal Information and Declarations

DECLARATION: Subject to alterations. Technical specifications, design, and appearance of products may change due to continuous research and development.

Trademarks: Google, Android, Android TV, Chromecast built-in are trademarks of Google LLC. HDMI and the HDMI logo are trademarks of HDMI Licensing Administrator, Inc.

© SKYWORTH 2021. All rights reserved.

Data Protection: SKYWORTH and its partners may collect technical data to improve products and services, provided it does not personally identify you. Some services may require registration and collect personal data.

Storage: Your device has been checked and packed carefully. Keep packaging away from children. Retain the carton during the warranty period for protection during repair or warranty service.

Software Description: This product includes software restricted from third-party modification. The manufacturer reserves the right to publish software updates.

Customer Support

For assistance, please visit our website or contact customer support:

Website: https://en.skyworthdigital.com

Company: SHENZHEN SKYWORTH DIGITAL TECHNOLOGY CO., LTD.

Address: Unit A 14F, Skyworth Bldg., Gaoxin Ave.1.S., Nanshan District, Shenzhen, China

Print Specifications

Part No.: 0750-HP47D66P-01

Unfolding Size: 400x75 mm

Folded Size: 50x75mm (Accordion fold)

Print Color: Black, 4-Color Print

Material: 80g Matt Artpaper

Finishing: Gloss Varnish, Matt Varnish

Notes:

• Tolerance: ±2mm
• ROHS & WEEE: Raw materials and post-processing meet ROHS and WEEE requirements.

Manufacturer: Jiahui/Voion/Fuweizhi

Designer: Peng Yuan

Certification Audit: Audit: