Product Liability Disclaimer-MEAN WELL Switching Power Supply ManufacturerGlobal Trade Item Number (GTIN)-MEAN WELL Switching Power Supply Manufacturer
Owner's Manual for MEAN WELL models including: MDR-60-24 60W Single Output Industrial DIN Rail Power Supply, MDR-60-24, 60W Single Output Industrial DIN Rail Power Supply, Output Industrial DIN Rail Power Supply, Industrial DIN Rail Power Supply, DIN Rail Power Supply, Rail Power Supply, Power Supply, Supply
MDR-60-24 MEAN WELL - РКС Компоненти - РАДІОМАГ
File Info : application/pdf, 2 Pages, 129.78KB
DocumentDocument60W Single Output Industrial DIN Rail Power Supply MDR-60 series GTIN CODE Features : Universal AC input/Full range Protections: Short circuit / Overload / Over voltage Cooling by free air convection Can be installed on DIN rail TS-35/7.5 or 15 Class I, Div 2 Hazardous Locations T4 LED indicator for power on DC OK relay contact No load power consumption<0.75W 100% full load burn-in test 3 years warranty User's Manual MW Search: https://www.meanwell.com/serviceGTIN.aspx SPECIFICATION UL62368-1 R33100 RoHS TPTC004 THOMAS SAMUEL THOMAS SAMUEL IS13252 (except 48V) Bauart gepruft Sicherheit egelma ge od o s be wac g www.tuv.com ID 2000000000 BS EN/EN62368-1 IEC62368-1 MODEL MDR-60-5 MDR-60-12 MDR-60-24 MDR-60-48 DC VOLTAGE 5V 12V 24V 48V RATED CURRENT 10A 5A 2.5A 1.25A CURRENT RANGE 0 ~ 10A 0 ~ 5A 0 ~ 2.5A 0 ~ 1.25A RATED POWER 50W 60W 60W 60W OUTPUT RIPPLE & NOISE (max.) Note.2 80mVp-p VOLTAGE ADJ. RANGE 5 ~ 6V VOLTAGE TOLERANCE Note.3 ±2.0% LINE REGULATION ±1.0% LOAD REGULATION ±1.5% 120mVp-p 12 ~ 15V ±1.0% ±1.0% ±1.0% 150mVp-p 24 ~ 30V ±1.0% ±1.0% ±1.0% 200mVp-p 48 ~ 56V ±1.0% ±1.0% ±1.0% SETUP, RISE TIME Note.5 500ms, 30ms/230VAC 500ms, 30ms/115VAC at full load HOLD UP TIME (Typ.) 50ms/230VAC 20ms/115VAC at full load VOLTAGE RANGE 85 ~ 264VAC 120 ~ 370VDC FREQUENCY RANGE 47 ~ 63Hz EFFICIENCY (Typ.) 78% 85% 87% 87% INPUT AC CURRENT (Typ.) 1.8A/115VAC 1A/230VAC INRUSH CURRENT (Typ.) COLD START 30A/115VAC 60A/230VAC LEAKAGE CURRENT <1mA / 240VAC OVERLOAD PROTECTION OVER VOLTAGE 105 ~ 150% rated output power Protection type : Constant current limiting, recovers automatically after fault condition is removed 6.25 ~ 7.25V 15.6 ~ 18V 31.2 ~ 36V 57.6 ~ 64.8V Protection type : Shut down o/p voltage, re-power on to recover FUNCTION DC OK SIGNAL WORKING TEMP. WORKING HUMIDITY ENVIRONMENT STORAGE TEMP., HUMIDITY TEMP. COEFFICIENT VIBRATION SAFETY STANDARDS SAFETY & WITHSTAND VOLTAGE EMC (Note 4) ISOLATION RESISTANCE EMC EMISSION EMC IMMUNITY Relay contact rating(max.): 30V/1A resistive -20 ~ +70 (Refer to "Derating Curve") 20 ~ 90% RH non-condensing -40 ~ +85, 10 ~ 95% RH ±0.03%/ (0 ~ 50) Component : 10 ~ 500Hz, 2G 10min./1cycle, period for 60min. each along X, Y, Z axes ; Mounting : Compliance to IEC60068-2-6 Ul508, UL62368-1, TUV BS EN/EN62368-1,Class I, Div. 2 Group A, B, C, D Hazardous Locations T4, EAC TP TC 004, BSMI CNS14336-1, AS/NZS 60950.1 , IS13252(Part1)/IEC60950-1(except 48V) approved I/P-O/P:3KVAC I/P-FG:2KVAC O/P-FG:0.5KVAC I/P-O/P, I/P-FG, O/P-FG:>100M Ohms / 500VDC / 25/ 70% RH Compliance to BS EN/EN55032 (CISPR32), BS EN/EN61204-3 Class B, BS EN/EN61000-3-2,-3, EAC TP TC 020, CNS13438 Class B Compliance to BS EN/EN61000-4-2, 3, 4, 5, 6, 8, 11, BS EN/EN55035, BS EN/EN61000-6-2, BS EN/EN61204-3, heavy industry level, EAC TP TC 020 OTHERS NOTE MTBF 2355.2K hrs min. Telcordia SR-332 (Bellcore) ; 489.9K hrs min. MIL-HDBK-217F (25) DIMENSION 40*90*100mm (W*H*D) PACKING 0.33Kg; 42pcs/14.8Kg/0.82CUFT 1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25 of ambient temperature. 2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1F & 47F parallel capacitor. 3. Tolerance : includes set up tolerance, line regulation and load regulation. 4. The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets EMC directives. For guidance on how to perform these EMC tests, please refer to EMI testing of component power supplies. (as available on https://www.meanwell.com//Upload/PDF/EMI_statement_en.pdf ) 5. Length of set up time is measured at first cold start. Turning ON/OFF the power supply may lead to increase of the set up time. 6. The ambient temperature derating of 3.5/1000m with fanless models and of 5/1000m with fan models for operating altitude higher than 2000m(6500ft). Product Liability DisclaimerFor detailed information, please refer to https://www.meanwell.com/serviceDisclaimer.aspx File Name:MDR-60-SPEC 2024-02-19 Downloaded from Arrow.com. 60W Single Output Industrial DIN Rail Power Supply Mechanical Specification 35 40 55555 +V +V -V -V DC OK DC OK + +V ADJ MDR-60 series Case No.962A Unit:mm 100 LOAD (%) 90 LOAD (%) NL Install DIN rail TS35/7.5 or TS35/15 Block Diagram 7.5 7.5 I/P EMI FILTER RECTIFIERS & FILTER FG DC OK Relay Contact Contact Close PSU turns on / DC OK. Contact Open PSU turns off / DC Fail. Contact Ratings (max.) 30V/1A resistive load. Derating Curve O.L.P. POWER SWITCHING CONTROL RECTIFIERS & FILTER O.C.P. DETECTION CIRCUIT O.V.P. Output Derating VS Input Voltage fosc : 60KHz DC OK +V -V 100 12V,24V,48V 80 60 50 5V 40 20 -20 0 10 20 30 45 55 60 70 (VERTICAL) AMBIENT TEMPERATURE () 100 90 80 70 60 50 40 85 95 100 115 120 140 160 180 200 220 240 264 INPUT VOLTAGE (VAC) 60Hz File Name:MDR-60-SPEC 2024-02-19 Downloaded from Arrow.com.