VARI-LITE TCW/TWW Acclaim Led Fresnel Instruction Manual

Instruction Manual for VARI-LITE models including: TCWTWW Acclaim Led Fresnel, TCWTWW, Acclaim Led Fresnel, Led Fresnel, Fresnel

Downloadbereich

Vari-Lite Fresnel cast C.Adolph & RST Distribution GmbH DE

File Info : application/pdf, 28 Pages, 1.12MB

fresnel-tcw-tww-users

FRESNEL
TUNABLE COOL WHITE TUNABLE WARM WHITE
User Manual

FRESNEL TCW/TWW

User Manual

INTRODUCTION
OUR GOAL
We are committed to providing you the highest quality in customer service. Our comprehensive resources are available to help your business succeed and ensure you get the full benefit of being a Vari-Lite customer.
TECHNICAL SUPPORT
Our Service and Support team is tasked with online and field support, repair, demo, commissioning, maintenance contracts, and technical training for fixtures and systems. In addition, this team plays a large role in a Systems sales, responsible for administering final commissioning, record-keeping, and organizing services. Refer to the back cover of this User Manual for contacts in your region or visit www.vari-lite.com/support
CUSTOMER SERVICE
Customer Service is responsible for boxed goods and spare parts quotations, order entry and fulfilment, project delivery, lead times, and general account management. They also manage all after sales warranty fulfilment, RGA, and repairs invoicing in tandem with our After Sales Service & Support team. Visit our website to find a customer service agent in your region.
ADDITIONAL DOCUMENTATION
Additional product documentation, including DMX maps, software, and photometric reports, are available for download on our website. For more information on installing DMX512 control systems, the following publication is available for purchase from the United States Institute for Theatre Technology (USITT), "Recommended Practice for DMX512: A Guide for Users and Installers, 2nd edition" (ISBN: 9780955703522). USITT Contact Information:
USITT 315 South Crouse Avenue, Suite 200 Syracuse, New York 13210-1844 USA Phone: 800-938-7488 or +1-315-463-6463 Fax: 866-398-7488 or +1-315-463-6525 Website: www.usitt.org
ABOUT THIS DOCUMENT
Read all instructions before installing or using this product. Retain this User Manual for future reference. Additional product information and descriptions may be found on the product data sheet(s) which can be downloaded from the website at www.vari-lite.com. This User Manual provides necessary information regarding safety, installation, operation and routine maintenance for Fresnel TCW/TWW. Familiarizing yourself with this information will help you to get the most out of your product.
WARNING: It is important to read ALL accompanying safety and installation instructions to avoid damage to the product and potential injury to yourself or others.

W W W.VAR I - L I T E . C O M

FRESNEL TCW/TWW

User Manual

SAFETY WARNINGS AND NOTICES
Read this user manual in full before attempting to install, operate or maintain the fixture to which it relates. This user manual is intended to provide general guidance to such suitably qualified personnel. Installation and operation of the fixture are to be performed by qualified personnel only. When using electrical equipment, basic safety precautions should always be followed including the following:
READ AND FOLLOW ALL SAFETY INSTRUCTIONS.
· For indoor, dry location use only. Do not use outdoors unless fixture is suitably IP rated. · Use safety tether when mounting. · Equipment should be mounted in locations and at heights where it will not be readily subjected to
tampering by unauthorized personnel. · Not for residential use. Do not use this equipment for other than intended use. · Note distance requirement(s) from combustible materials or illuminated objects. Do not mount near gas
or electric heaters. · Install only in locations with adequate ventilation. Ensure sure that ventilation slots are not blocked. · Ensure that the voltage and frequency of the power supply match the power requirements of the
fixture. · The fixture must be earthed/grounded to the appropriate conductor. · Do not operate fixture outside the specified ambient temperature range. · Do not connect the fixture to any dimmer pack. · The use of accessory equipment not recommended by the manufacturer may cause an unsafe condition
and void warranty. · Refer service to qualified personnel. This fixture contains no user serviceable parts. · Prior to first use, carefully inspect fixture to ensure no damage has occurred during shipping. · Materials used in the manufacturing process can cause strong odors when the product is new. These
odors dissipate over time. · Prior to each use, carefully inspect power cables and replace any damaged cables. · Exterior surfaces of the luminaire will be hot during operation. Take appropriate precautions. · Continuous use of the fixture may shorten the lifespan. Power down the fixture when not in use. · Do not cycle power on and o repeatedly. Disconnect mains power if the fixture is not used for an
extended period. · Clean fixtures regularly, particularly when working in a dusty environment. · Never touch power cables or wires while the fixture is powered on. · Avoid entangling power wires with other cables. · In the event of a serious operating problem, immediately discontinue using the fixture. · It is hazardous to operate luminaires without lens or shield. Shields, lenses, or ultraviolet screens shall be
changed if they have become visibly damaged to such an extent that their e ectiveness is impaired, for example, by cracks or deep scratches. · Original packing materials can be reused for transporting the fixture. · Do not look directly at the LED light beam while the fixture is on. · This is a Class A product. In a domestic environment this product may cause radio interference, in which case, the user may be required to take adequate measures. · The light source contained in this luminaire shall only be replaced by the manufacturer or service agent or similarly qualified person.
SAVE THESE INSTRUCTIONS.
WARNING: Refer to National Electrical Code® and local codes for cable specifications. Failure to use proper cable can result in damage to equipment or danger to personnel. Caution Against Direct Sunlight Through Front Lens Assembly

W W W.VAR I - L I T E . C O M

FRESNEL TCW/TWW

User Manual

CAUTION AGAINST DIRECT SUNLIGHT THROUGH FRONT LENS ASSEMBLY
The design and nature of the front lens assembly in Vari-Lite LLC luminaires is to e ciently focus the light energy from the luminaire's lamp for maximum light output.
· When the front lens assembly is exposed to direct sunlight or intense light from neighboring fixtures, the lens will collect and intensify this light and focus it back into the fixture. Intense sunlight or beams from other fixtures can cause damage to internal assemblies contained within the fixture.
· When fixture is not in use and direct sunlight or other intense light is present, position luminaires so their front lens assembly it not directly exposed to the light source.
CAUTION AGAINST POWERING LUMINAIRES FROM DIMMER CIRCUITS
It is not recommended to power any Vari-Lite LLC luminaire from a dimmer - even in `NONDIM' mode. Dimmer and non-dim modules are not suitable sources of power because their output modifies the AC wave form. This may work for a short time, but eventually results in power problems, luminaire mis-operation and/or failure.
· When using a power distribution rack, do not use dimmer or non-dim modules to power any Vari-Lite LLC luminaire. Damage to the luminaire can occur.
· Using a dimmer or non-dim module to power your Vari-Lite LLC luminaire will void your luminaire's warranty.
CAUTION AGAINST THE USE OF THIRD PARTY PARTS OR ACCESSORIES
· Heat and heat distribution are important factors when operating Vari-Lite LLC luminaires. Vari-Lite LLC luminaires are designed to dissipate heat e ciently and safely. Any blockages or obstructions, such as aftermarket ba es, covers, enclosures, etc. can interrupt the luminaire's ability to dissipate heat properly and can damage the luminaire.
· Vari-Lite LLC cannot be responsible for issues arising from non-approved parts and accessories installed on or used with any Vari-Lite LLC product. Customers of such products should contact the manufacturer directly for assistance and support.
TRANSPORTING LUMINAIRES
When shipping or transporting luminaires, Vari-Lite LLC recommends that the luminaire(s) be su ciently protected against any (including, but not limited to) shock, vibration, drops, jarring, exposure to the environment, etc. Failure to su ciently protect any Vari-Lite LLC luminaire during shipping or transportation will result in damage and void the luminaire's warranty. Vari-Lite LLC will not be responsible for any shipping damage or breakage of any product under any circumstances. Vari-Lite LLC will not be responsible for any third party case manufacturer's cases.
NOTE: As with all automated luminaires, proper handling and suitable protective shipping cases should be used when transporting fixtures to reduce the risk of damage.
TRANSPORTATION AND SHIPPING CASE REQUIREMENTS
Cases to transport Vari-Lite LLC luminaires should meet the following loading requirements: · Luminaire head, yoke, and enclosure sub-assemblies shall be equally supported and constrained where no one sub-assembly (head, yoke, or enclosure) fully supports the entire mass of the luminaire. · The interior of the case shall be of high quality and uniform density foam. The foam shall be of the same type and density throughout as to equally and uniformly support loading at every contact surface. · The case shall, when laid on any of its six (6) surfaces, maintain the loading requirements outlined above. · All cases not meeting the aforementioned loading requirements, with wheels, shall have markings on the exterior of the case that the unit is to be transported on it wheels only (e.g. "Case must be transported and remain [at all times] on its wheels").

W W W.VAR I - L I T E . C O M

FRESNEL TCW/TWW

User Manual

COMPLIANCE NOTICE
FCC DECLARATION OF CONFORMITY
This equipment has been tested and found to comply with the limits for a Class A digital device pursuant to Part 15 of FCC Rules. These limits are designed to provide reasonable protection against harmful interference when this equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with Vari-Lite system, service, and safety guidelines, may cause harmful interference to radio communications. As tested under this standard:
FCC 47CFR 15B clA*CEI Issued:2009/10/01 Title 47 CFR Part 15 Subpart B Unintentional Radiators Class A Operation of this equipment in a residential area is likely to cause harmful interference, in which case the user will be required to correct the interference at his/her own expense.
EU DECLARATION OF CONFORMITY
We, Vari-Lite LLC., 10911 Petal Street, Dallas, Texas 75238, declare under our responsibility for the products contained herein are in conformity with the essential requirements of the following European Directives and harmonized standards:
Low Voltage Director (LVD), 2006/95/EC EN 60589-2-17:1984+A1:1987+A2:1990 used in conjunction with 60598-1:2008/A11:2009
Electromagnetic Compatibility Directive (EMC), 2004//108/EC EN 55022:2010, EN55024:2010

W W W.VAR I - L I T E . C O M

FRESNEL TCW/TWW

User Manual

HOW TO OBTAIN WARRANTY SERVICE
A copy of the Limited Warranty card was included in the shipping package for this product. To obtain warranty service, please contact customer service at 1-214-647-7880, or entertainment.service@ signify.com and request a Return Material Authorization (RMA) for warranty service. You will need to provide the model and serial number of the item being returned, a description of the problem or failure and the name of the registered user or organization. If available, you should have your sales invoice to establish the date of sale as the beginning of the warranty period. Once you obtain the RMA, pack the unit in a secure shipping container or in its original packing box. Be sure to clearly indicate the RMA number on all packing lists, correspondence, and shipping labels. If available, please include a copy of your invoice (as proof of purchase) in the shipping container.
With the RMA number written legibly on or near the shipping address label, return the unit, freight prepaid, to:
Vari-Lite LLC Attention: Warranty Service (RMA# ________) 10911 Petal Street Dallas, Texas 75238 USA
As stated in the warranty, it is required that the shipment be insured and FOB our service center.
IMPORTANT! When returning products to Vari-Lite for repairs (warranty or out-of-warranty) from a country other than the USA, "Vari-Lite LLC", must appear in the address block as the Importer of Record (IOR) on all shipping documentation, Commercial Invoices, etc. This must be done in order to clear customs in a timely manner and prevent returns.

W W W.VAR I - L I T E . C O M

CRI exceeding >94 CRI across the range. The LED Fresnel is also available in full color (RGBALC) and tunable warm white (2700K to
FRESNEL T4C50W0K/) TveWrsioWns. The Fresnel uses a manually operated zoom
system located on either side near the front of the luminaire, providing a smooth zoom range of 10° to 55°. The locking default
1 D ES C R I P T I O N standard size accessory rails located at the front of the fixture allows for further beam shaping using the optional 8 leaf barndoor or thirdparty accessories. To ensure these high-powered LED fixtures are suitable for use in the quietists of applications, the Vari-Lite Fresnel
F E AT U RuEtilizSes SmartFan Control technology with Standard, Studio, and Whisper modes.

User Manual

· High output midsized LED theatrical luminaires - modern fixtures with quality you can trust.
· Tunable white with >94 CRI - adjust color temperature without compromising output or quality of light.
· Standard-size accessory rails to support optional 8 leaf barn door or third - party accessories- multiple, easily-accessible options to get the perfect look.

· Adjustable frequency to exceed camera frame rates - camerafriendly fixtures for IMAG, event recordings, or TV and film applications.
· Quiet operation with variable fan control (Standard, Studio, and Whisper) - perfect for use in quiet environments.
For detailed product information, please refer to the Product Guide at https://www.vari-lite.com/global/products/fresnel-tcw

COMPONENTS
The document provides installation and operation instructions for the following products: · Fresnel TCW or Fresnel TWW
Read all instructions before installing or using this product. Retain this manual for future reference. Additional product information and descriptions may be found on the product specification sheet.
INCLUDED ITEMS
Each Fresnel luminaire includes the following items: · Fresnel TCW or LED Fresnel TWW · TrueOne compatible power connector
FRESNEL_TCW
· Quick Start Guide
INCLUDED ITEMS

FRESNEL TCW/TWW

POWER CONNECTOR

QUICK START GUIDE (this document)

W W W.VAR I - L I T E . C O M

FRESNEL TCW/TWW

User Manual

2 INSTALLATION
MOUNTING
The unit should be mounted via its screw holes on the bracket. Always ensure that the unit is firmly fixed to avoid vibration and slipping while operating. Always ensure that the structure to which you are attaching the unit is secure and is able to support a weight of 10 times of the unit's weight. Always use a safety cable that can hold up to 12 times the weight of the unit when installing the fixture. The luminaire must be mounted by professionals.

Clamp

Hanging Bracket

NOTE: Truss hooks shown are sold separately. Truss and pipe by others.

W W W.VAR I - L I T E . C O M

FRESNEL TCW/TWW

User Manual

3MENU OPERATION
CONTROL PANEL
Press the MENU button to select any functions, until the required function is shown in the display. Select the desired function by pressing ENTER, which will cause the display to blink. Use the UP and DOWN button to change the mode. Once the required mode has been selected, press the ENTER button to accept the selection. Press MENU to return to the previous menu or let the unit idle for one minute to exit menu mode automatically.

1 2
9 78

53 64

1 LCD DISPLAY. Shows the menu and selected function buttons.
2 BUTTONS. Menu. To select programming functions. Down. To go backward in the selected functions. Up. To go forward in the selected functions. Enter. To confirm the selected functions.
3 DMX IN. 5-pin XLR cable to link DMX console.
4 DMX OUT. 5-pin XLR cable to the next unit.
5 POWER IN. Connects to power supply.
6 POWER OUT. Connects to next fixture.
7 DIM. 0-100%
8 CCT. 4000K to 6500K (TCW) or 2700K to 4500K (TWW)
9 ZOOM. Manual zoom knob.

W W W.VAR I - L I T E . C O M

FRESNEL TCW/TWW

User Manual

LEVEL 1 address Configure
DMX Fixture

LEVEL 2

LEVEL 3

LEVEL 4

LEVEL 5

LEVEL 6

001~506(16 Bit), 001-508(8 Bit), 001-511(2 Channel)

leD Hours

XXXXXX h

reset leD Hour

are you sure?

square Curve

Dimming Curve

s Curve

linear Curve

Dim snap

On (Fast) Off (slow)

standard

leD

Output Mode

studio Whisper

Fan Mode

On auto

1200Hz

2500Hz

leD Frequency

5000Hz 10000Hz

20000Hz

25000Hz

30 sec

Disp Timeout

5 Min 10 Min

reset

Yes/no

address

001~506(16 Bit), 001-508(8 Bit), 001-511(2 Channel)

16 Bit

DMX Mode

8 Bit

2 Channel

Hold

DMX Fail

Blackout

Go to Preset

Ch 1 - Intensity XXX (Value)

Data

Ch 2 -Intensity Fine XXX (Value)

...all functions

UID

UID electronic format

status

(no errors..or displays a list of errors)

reboot Fixture

are you sure?

Version

VXXX

Fixture Hours

XXXXXX h

Crossload (software) send

Fan Check

X rpm

service

Diagnostics

Board Check

(no errors..or displays a list of errors)

sensor Check X °C

DEFAULT 001 Default
Default Default
Default Default
Default
001 Default Default

W W W.VAR I - L I T E . C O M

FRESNEL TCW/TWW

User Manual

LEVEL 1

LEVEL 2

Playback

Manual Preset

LEVEL 3 Power Up Preset Intensity Priority
Power Up? load Preset
edit settings

edit Programs

store

Clear

Dial Mode

enables the manual control knobs

Clear all
Knob 1 Intensity
0 - 100%
Double press at anytime to activate Dial Mode

LEVEL 4 01 - 20 0 - 255 Preset DMX Off On 01 - 20 Intensity Cool or Warm nautural
01 - 20

LEVEL 5
0 - 255 0 - 255 0 - 255 are you sure?

01 - 20

are you sure?

Yes are you sure?
no Knob 2 CCT 4000K - 6500K (TCW) 2700K - 4500K (TWW)

LEVEL 6
Yes no Yes no

DEFAULT
255 Default
Default

W W W.VAR I - L I T E . C O M

FRESNEL TCW/TWW
MENU SYSTEM

User Manual

DISPLAY AND MENU SYSTEM OPERATION
The Display Menu system consists of several categories. Use the Menu Button to access the menu. Then use the Up/Down arrow to navigate. When you reach the desired item, touch the Enter Button. To go backwards, touch the Menu Button. To navigate and access menu settings/selections: Step 1. Make sure unit is powered and turned on. Step 2. Touch [MENU] to access menu categories. Step 3. Use two Arrow () buttons to navigate through the various options and settings. Step 4. Once menu item is reached, touch [ENTER] to access the menu item parameters. Step 5. Make changes to parameters as desired. Step 6. Press [ENTER] button to accept changes.
ADDRESS
ADDRESS
Sets the starting DMX address for the fixture. Can also be set via RDM.

CONFIGURE
LED
This menu allows for viewing the LED engine hours, setting the dimming curve, dim snap, output mode, fan mode, and LED frequency.
LED Hours Displays the current LED engine hours.
Reset LED Hours Allows the LED hours of the engine to be reset. Should only be done if the engine has been replaced
Dimming Curve Select from Linear, S-Curve and Square Law. Can also be set via the control channel and RDM.
Dim Snap Dim Snap On allows for fastest output changes between levels but reduces smoothness dimming the LED engine. Dim Snap Off ensures all fades between output levels remains smooth and flicker free but limits fast, instant snaps between levels. Can also be set via the control channel and RDM.
Output Mode Standard mode provides full LED output. Studio mode reduces fan speed to reduce the fan noise of the fixture. Whisper mode decrease the fan noise further. In both Studio mode and Whisper mode, the LED output will decrease accordingly. Can also be set via the control channel and RDM.
Fan Mode Fan On runs fans at continuous max speed based on Output Mode. Fan Auto will reduce/increase speed on demand based on LED operating temperature. The fan will not exceed the maximum permissible level based on Output Mode. Can also be set via the control channel and RDM. See Appendix B.

W W W.VAR I - L I T E . C O M

FRESNEL TCW/TWW
LED Frequency Choose the refresh rate of the LED engine (see Display Menu Tree for list).

User Manual

DISPLAY TIMEOUT
Sets how long the display remains illuminated after the last button touch. Choose from 30 seconds, 5 minutes, 10 minutes, or always on.

RESET
Resets all the factory defaults of the fixture. This includes setting the DMX Address to 001. Can also be done via RDM and via the control channel.
NOTE: Control channel will not change the current DMX address.
DMX
ADDRESS
Sets the starting DMX address of the fixture. Can also be set via RDM.
DMX MODE
16 Bit 16 Bit DMX control of Intensity and CCT, plus 8 Bit DMX control of Strobe, Fan and Luminaire Control.
8 Bit 8 Bit DMX control of Intensity, CCT, Strobe, Fan and Luminaire Control.
2 Channel 8 Bit DMX control of Intesnity and CCT.
DMX FAIL
DMX Hold If DMX is lost, fixture will maintain its present state until DMX is restored.
Blackout If DMX is lost, fixture will go to blackout until DMX is restored.
Goto Preset If DMX is lost, fixture will go to the preset (1 through 20).
DATA
Allows the current DMX value present on each of the luminaire's DMX channels to be viewed.

W W W.VAR I - L I T E . C O M

FRESNEL TCW/TWW

User Manual

FIXTURE

UID
Displays the UID as set in the luminaire.
S TAT U S
Shows list of error message from previous calibration. If none, it will say No Errors.
REBOOT FIXTURE
Restarts the entire operating system of the fixture. Can be performed via the control channel or RDM.
VERSION
Shows the current software version of the fixture. Version is listed in MM/DD/YY format. Can be viewed via RDM.
FIXTURE HOURS
Shows the accumulated hours the fixture has been powered on. Can be viewed via RDM.
CROSSLOAD (SOFTWARE)
Allows the current version of software installed in the fixture to be sent to other units via an attached DMX cable.
SERVICE - DIAGNOSTICS
Fan Check Shows the current fan speed in RPM.
Board Check Shows the current status of the control board.
Sensor Check Shows the current temp at the LED in °C.
MANUAL PRESET

P L AY B AC K
Power Up Preset Selects the preset (1 to 20) that will be played back after power up if enabled.
Intensity Selects the master intensity of a preset being played back (0 to 255).
Priority Choose Preset if you always want a preset to playback. Choose DMX if you only want a preset to playback if there is no DMX present.
Power Up? Choose Preset On if you want the fixture to playback the preset at power up. Choose Preset Off if you do not want a preset to play.

W W W.VAR I - L I T E . C O M

FRESNEL TCW/TWW

User Manual

EDIT PROGRAMS
Load Preset Select from preset 1 to 20 and touch [ENTER]. That preset will be played back.
Edit Settings Choose the function from the list you wish to edit and touch [ENTER]. Use the [UP]/[DOWN] buttons to set desired value. Touch [ENTER] to store. Then continue to adjust all function desired.
Store After setting all your functions, select which preset number you wish to store (1 to 20) and touch [ENTER]. Touch [ENTER] again to confirm when prompted.
Clear Select the preset (1 to 20) you wish to clear and touch [ENTER]. Touch [ENTER] again to confirm when prompted.
Clear All Presets When prompted, touch [ENTER] to confirm and all presets (1 to 20) will be erased.

WARNING: Clearing the presets CANNOT be undone!

DIAL MODE
Allows the use of the manual knobs below the display. Can be selected via the UI by touching [ENTER] at DIAL MODE. May also be selected at any time by double clicking the first knob. Use the first knob to adjust the intensity from 0 to 100%. Use the second knob to adjust the CCT from 4000K to 6500K on the TCW and from 2700K to 4500K on the TWW.
NOTE: Dial Mode will overide the current DMX values. Exiting Dial Mode will return the fixture to DMX control.

DIMMER

ENTER

CCT 4000K

UP DOWN

W W W.VAR I - L I T E . C O M

FRESNEL TCW/TWW

User Manual

4DMX MAPPING

The fixture can be operated by DMX controller. The following tables assumes a DMX start address of 1. When a different starting address is used, this address becomes channel 1 function and other functions follow in sequence.

TABLE 1.16 BIT

DMX CHANNEL

PARAMETER

DEFAULTS RANGE DMX

DESCRIPTION

Intensity (High)

0 - 65535 16-bit Intensity (Dimmer) Control

Intensity (low)

0 - 100% Outut

0 - 255

Control of strobe

0 - 9

no strobe Function - shutter open

10 - 99

strobe s>>>>>F

strobe

100 - 109 no strobe Function - shutter open

110 - 179

lighting strobe s>>>>>F

180 - 189 no strobe Function - shutter open

190 - 255 random strobe s>>>>>F

0 - 255

Dynamic control of fan speed vs leD output

0 - 4

automatic fan/output adjustment

Fan Control

linear control fo fan speed and leD output* 0
DMX 5 = Highest Constant Fan speed 5 - 255
DMX 255 = lowest Constant Fan speed

* standard mode only

0 - 255

Control Channel used for fixture settings

set discrete value of desired effect, wait >3 seconds,

then set value to 0 (idle)

**Function does not require 3 second rule to activate function

0 - 5

Idle (Default must be 0)

6 - 10

Full luminaire re-Cal - also wakes from shutdown

11 - 15

Fixture shutdown

16 - 20

reserved

21 - 25

Display - Menu On

26 - 30

Display - Menu OFF

31 - 40

reserved

41 - 45

Dimming Curve linear**

46 - 50

Dimming Curve s-Curve**

Control Channel

51 - 55

Dimming Curve square law (Default)**

56 - 60

reserved

61 - 65

Dimmer snap On**

66 - 70

Dimmer snap Off (Default)**

71 - 110

reserved

111 - 115

standard Mode (Default)

116 - 120

studio Mode - reduced output with lower fan

121 - 125

Whisper Mode - reduced output with lower fan

126 - 135

reserved

136 - 140 Fan On (Default)

141 - 145

Fan auto

146 - 170 reserved

171 - 175

reset defaults

176 - 255 reserved

CCT High

CCT low

Tunable leD array 0 - 100%

0 - 65535 0 = 4000K (TCW) or 2700K (TWW)

255 = 6500K (TCW) or 4500K (TWW)

W W W.VAR I - L I T E . C O M

FRESNEL TCW/TWW

User Manual

TABLE 2.8 BIT

DMX CHANNEL

PARAMETER

Intensity

strobe

Fan Control

Control Channel

CCT

DEFAULTS 0 0 0
0
0

RANGE DMX

DESCRIPTION

0 - 255
0 - 255 0 - 9
10 - 99 100 - 109 110 - 179 180 - 189 190 - 255 0 - 255
0 - 4
5 - 255
0 - 255
0 - 5 6 - 10 11 - 15 16 - 20 21 - 25 26 - 30 31 - 40 41 - 45 46 - 50 51 - 55 56 - 60 61 - 65 66 - 70 71 - 110 111 - 115 116 - 120 121 - 125 126 - 135 136 - 140 141 - 145 146 - 170 171 - 175 176 - 255
0 - 255

8 bit Intensity (Dimmer) Control 0 - 100% Output Control of strobe no strobe Function - shutter open strobe s>>>>>F no strobe Function - shutter open lighting strobe s>>>>>F no strobe Function - shutter open random strobe s>>>>>F Dynamic control of fan speed vs leD output automatic fan/output adjustment linear control fo fan speed and leD output* DMX 5 = Highest Constant Fan speed DMX 255 = lowest Constant Fan speed * standard mode only Control Channel used for fixture settings set discrete value of desired effect, wait >3 seconds, then set value to 0 (idle) **Function does not require 3 second rule to activate function Idle (Default must be 0) Full luminaire re-Cal - also wakes from shutdown Fixture shutdown reserved Display - Menu On Display - Menu OFF reserved Dimming Curve linear** Dimming Curve s-Curve** Dimming Curve square law (Default)** reserved Dim snap On** Dim snap Off (Default)** reserved standard Mode (Default) studio Mode - reduced output with lower fan Whisper Mode - reduced output with lower fan reserved Fan On (Default) Fan auto reserved reset defaults reserved Tunable leD array 0 - 100% 0 = 4000K (TCW) or 2700K (TWW) 255 = 6500K (TCW) or 4500K (TWW)

W W W.VAR I - L I T E . C O M

FRESNEL TCW/TWW

User Manual

TABLE 3.2 CHANNEL

DMX CHANNEL

PARAMETER

Intensity

CCT

DEFAULTS 0
0

RANGE DMX

DESCRIPTION

0 - 255 0 - 255 5 - 255

8 bit Intensity (Dimmer) Control 0 - 100% Output Tunable leD array 0 - 100% 0 = 4000K (TCW) or 2700K (TWW) 255 = 6500K (TCW or 4500K (TWW) linear control fo fan speed and leD output* DMX 5 = Highest Constant Fan speed DMX 255 = lowest Constant Fan speed * standard mode only

W W W.VAR I - L I T E . C O M

FRESNEL TCW/TWW

User Manual

TABLE 4.CONTROL CHANNEL

DMX RANGE

ITEMS

DESCRIPTION

POWER CYCLE RULES

Control channel used for fixture settings

0 - 255

Control Channel

set discrete value of desired effect, wait >3 seconds, then set value to 0 (idle)

n/a

**Function does not require 3 second rule to activate function

0 - 5 Idle (Default)

Default value used to active functions. should default to 0

n/a

6 - 10

Full luminaire reCal

recalibrates all functions in the luminaire. also used to wake from shutdown

n/a

11 - 15

Fixture shutdown

shuts down all fixture output and turns off all fans. Fixture can be re-actived by a power cycle or via the reCal command

Will restart normally

16 - 20 reserved

21 - 25

Display - Menu On

switches UI display on remotely - Display will time out as set in UI

n/a

26 - 30

Display - Menu Off

switched UI display off remotely if on.

n/a

31 - 40 reserved

41 - 45

Dimming Curve linear**

selects linear Dimming Curve

Holds setting on power cycle

46 - 50

Dimming Curve s-Curve**

selects s-law Dimming Curve

Holds setting on power cycle

51 - 55

Dimming Curve square law (Default)**

selects square law Dimming Curve

Holds setting on power cycle

56 - 60 reserved

61 - 65

Dimmer snap On**

allows for fastest output changes between levels but reduces smoothness of dimming and color

Holds setting on power cycle

66 - 70

Dimmer snap Off ensure fades between levels remain smooth and flicker free

(Default)**

but limits instand snaps

Holds setting on power cycle

71 - 110 reserved

111 - 115

standard Mode (Default)

standard mode - Full leD output + full continuous fan at max speed (loudest setting). Fan remains at constant speed (unless in fan auto mode). nC40

Holds setting on power cycle

116 - 120 studio Mode

studio mode - Fan speed reduced to reduce dB levels 10% of full speed and leD output approximatly 80% of standard. Fan remains constant speed (unless in fan auto mode). nC35

Holds setting on power cycle

121 - 125 Whisper Mode

Whisper Mode - Fan speed reduced to reduce dB levels 30% of full speed and leD output approximatly 60% of standard. Fan remains constand speed (unless in fan auto mode). nC25

Holds setting on power cycle

126 - 135 reserved

136 - 140 Fan On (Default) Fan runs at continuous speed for selected output mode

Holds setting on power cycle

141 - 145 Fan auto

Fans will increase/decrease speed based on leD operation

Holds stting on power cycle

146 - 170 reserved

171 - 175 reset default

resets all paramters to factory default with the exception of DMX address and fixture DMX Mode

n/a

176 - 255 reserved

FUNCTION SELECTION VIA UI
n/a
n/a Yes Yes, press Menu twice to wake
Button press turns display on n/a
Yes Yes Yes
Yes Yes
Yes
Yes
Yes
Yes Yes
Yes, but will reset DMX address and
DMX Mode

W W W.VAR I - L I T E . C O M

FRESNEL TCW/TWW

User Manual

DMX512 CONNECTION
· At last unit, the DMX cable has to be terminated with a terminator. Solder a 120 1/4W resistor between pin 2(DMX-) and pin 3(DMX+) into a 5-pin XLR-plug and plug it in the DMX-output of the last unit.
· Connect the unit together in a `daisy chain` by XLR plug from the output of the unit to the input of the next unit. The cable cannot branched or split to a `Y` cable. DMX 512 is a very high-speed signal. Inadequate or damaged cables, soldered joints or corroded connectors can easily distort the signal and shut down the system.
· The DMX output and input connectors are pass-through to maintain the DMX circuit, when one of the units' power is disconnected.
· Each lighting unit needs to have an address set to receive the data sent by the controller. The address number is between 0-511 (usually 0 & 1 are equal to 1).
· The end of the DMX 512 system should be terminated to reduce signal errors.
· 5 pin XLR: Pin 1: GND, Pin 2: Negative signal (-), Pin 3: Positive signal (+), Pin 4/Pin 5: Not used.

W W W.VAR I - L I T E . C O M

FRESNEL TCW/TWW

User Manual

5RDM PARAMETER IDs

Remote Device Management (RDM) is a protocol enhancement to USITT DMX512 that allows bi-directional communication between a lighting or system controller and attached RDM compliant devices over a standard DMX line. This protocol will allow configuration, status monitoring, and management of these devices in such a way that does not disturb the normal operation of standard DMX512 devices that do not recognize the RDM protocol.

Model ID 0x0119 0x011a

Leko LED Outdoor, RDM PRODUCT PARAMETER IDS

Manufacturer

Vendor ID

Model Description

Vari-Lite

0x564C

Fresnel TCW

Vari-Lite

0x564C

Fresnel TWW

Product Category 0x0101 0x0101

The table on the following pages outlines and describes all the RDM parameters IDs associated with the.

W W W.VAR I - L I T E . C O M

FRESNEL TCW/TWW

User Manual

GET

SET

ALLOWED ALLOWED

RDM PARAMETER IDS

VALUE

COMMENT

ESTA STANDARD

REQUIRED /

DMX / UI DESCIPTION

Category - network Management

DIsC_UnIQUe_BranCH

0x0001

DIsC_MUTe

0x0002

DIsC_Un_MUTe

0x0003

PrOXIeD_DeVICes

0x0010

PrOXIeD_DeVICes_COUnT 0x0011

COMMs_sTaTUs

0x0015

Category - status Collection

QUeUeD_MessaGe

0x0020

sTaTUs_MessaGes

0x0030

sTaTUs_ID_DesCrIPTIOn 0x0031

Clear_sTaTUs_ID

0x0032

sUB_DeVICe_sTaTUs_

0x0033

rePOrT_THresHOlD

Category - rDM Information

sUPPOrTeD_ParaMeTers 0x0050

ParaMeTer_DesCrIPTIOn 0x0051

Category - Product Information

DeVICe_InFO

0x0060

PrODUCT_DeTaIl_ID_lIsT 0x0070

DeVICe_MODel_

0x0080

DesCrIPTIOn

ManUFaCTUrer_laBel 0x0081

DeVICe_laBel

0x0082

FaCTOrY_DeFaUlTs

0x0090

lanGUaGe_CaPaBIlITIes 0x00a0

lanGUaGe

0x00B0

sOFTWare_VersIOn_

0x00C0

laBel

BOOT_sOFTWare_

0x00C1

VersIOn_ID

BOOT_sOFTWare_

0x00C2

VersIOn_laBel

Category - DMX512 setup

DMX_PersOnalITY

0x00e0

DMX_PersOnalITY_ DesCrIPTIOn

0x00e1

DMX_sTarT_aDDress

0x00F0

slOT_InFO

0x0120

slOT_DesCrIPTIOn

0x0121

DeFaUlT_slOT_ValUe

0x0122

Category sensors 0x02xx Use

sensOr_DeFInITIOn

0x0200

sensOr_ValUe

0x0201

Fan speed and

reCOrD_sensOrs

0x0202

Category - Dimmer settings 0x03xx - FUTUre Use

Dimmer Curve

0x0343

X X X

status

X X

reset Defaults

Version

DMX Mode

address

Diagnostics

W W W.VAR I - L I T E . C O M

FRESNEL TCW/TWW

User Manual

GET

SET

ALLOWED ALLOWED

RDM PARAMETER IDS

VALUE

COMMENT

ESTA STANDARD

REQUIRED /

DMX / UI DESCIPTION

Dimmer Curve Description 0x0344

Modulation Frequency

0x0347

Modulation Frequency Description

0x0348

Category - Power / lamp settings 0x04xx

DeVICe_HOUrs

0x0400

laMP_HOUrs

0x0401

laMP_sTrIKes

0x0402

laMP_sTaTe

0x0403

laMP_On_MODe

0x0404

DeVICe_POWer_CYCles 0x0405

Category - Display settings 0x05xx

DIsPlaY_InVerT

0x0500

DIsPlaY_leVel

0x0501

Category - Configuration 0x06xx

Pan_InVerT

0x0600

TIlT_InVerT

0x0601

Pan_TIlT_sWaP

0x0602

real_TIMe_ClOCK

0x0603

Category - Control 0x10xx

IDenTIFY_DeVICe

0x1000

reseT_DeVICe

0x1001

POWer_sTaTe

0x1010

all Test,

PerFOrM_selFTesT

0x1020 Pan/Tilt,

encoder

selF_TesT_DesCrIPTIOn 0x1021

CaPTUre PreseT

0x1030

see e120_2010a

PreseT PlaYBaCK

0x1031

Table a-7 defines

esTa reserved Future rDM

0x7Fe00x7FFF

Manufacturer-specific PIDs

0x80000xFFDF

Value range

depends

Output Power Mode

0x8a97 on options

(standard,

studio, etc)

Pan/Tilt Feedback (On/Off) 0x8aD3

Display On Time

0x8aa0

Value range depends on options

Value range

leD Dimmer Curve

0x8aa1 depends on

options

Pan Tilt Movement (On/Off) 0x8aa2

Head Motor Movement (On/ Off )

0x8aa3

X X X

Fixture Hours

X X

leD Output Mode X

Display On

Time

leD Dimming Curve

W W W.VAR I - L I T E . C O M

FRESNEL TCW/TWW

User Manual

GET

SET

ALLOWED ALLOWED

RDM PARAMETER IDS

VALUE

COMMENT

ESTA STANDARD

REQUIRED /

DMX / UI DESCIPTION

Value range

auto shutdown Mode

0x8aa4 depends on

options

leD Hours

0x8aa5

Dim snap (On/Off)

0x8aa6

Color snap (On/Off)

0x8aa7

auto Fan Mode (On/Off)

0x8aa8

Gamma shift

0x8aa9

Value range depends on options

Tungsten Dimming (On/ Off )

0x8aaa

CTB Correction (On/Off)

0x8aaB

leD refresh rate

0x8aaC

Value range depends on options

side Hang (On/Off)

0x8aaD

Focus Track (On/Off)

0x8aae

Control signel select DMX only/artneT (On/Off)

0x8aaF

different

recalibrate Fixture (level)

0x8aB0

levels (all, position,

color, etc)

DMX Fail (Hold, Blackout, GOTO Preset)

0x8aB1

artnet Universe

0x8aB2

artnet net

0x8aB3

artnet sub-net

0x8aB4

artnet ethernet IP

0x8aB5

artnet ethernet sub-net Mask

0x8aB6

Manual PreseT Playback Power Up Preset

0x8aB7

Manual PreseT Playback Preset Intensity

0x8aB8

Manual PreseT Playback Priority

0x8aB9

Manual PreseT Playback Power Up?

0x8aBa

leD Color Calibration (On/ Off )

0x8aBB

leD Fan Mode
leD refresh rate
DMX Fail

leD Color

Calibration

W W W.VAR I - L I T E . C O M

FRESNEL TCW/TWW

User Manual

Appendix A
CARE AND MAINTENANCE

TROUBLeSHOOTinG
The following are a few common problems that may occur during operation. Luminaire does not work; light and fan do not turn on.
· Check power connection and main fuse. · Measure the mains voltage on the main connector. Not responding to DMX controller. · If DMX LED is not illuminated, verify that the DMX cables are properly connected. · If the DMX LED is illuminated and there is no response, verify DMX address settings and the DMX
polarity. · If you experience intermittent DMX signal problems, check the pins on the connectors or on the PCB. · Test with a di erent DMX controller. · Check if the DMX cables run near or alongside high voltage cables that may cause interference to the
DMX interface circuit.

CLeAninG
Cleaning the inside of the luminaire must be carried out periodically in order to optimize the light output.Cleaning frequency depends on the environment in which the fixture operates. Damp, smoky or particularly dusty surroundings can cause greater accumulation of dirt on the fixture's optics.
· Clean with a soft cloth using glass cleaning fluid. · Dry parts carefully. · Clean the external optics at least every 30 days.

W W W.VAR I - L I T E . C O M

FRESNEL TCW/TWW

User Manual

Appendix B

FAN SPEED AND CONTROL

AddendUM

FAn Speed And COnTROL
All Vari-Lite luminaires will be governed by the same fan speed vs. noise levels. vs. maximum power output rules as detailed below. The noise related to these levels will conform to the Noise Criteria levels, details of which are contained within this document.
There are three control parameters that can be selected separately or in conjunction (when permitted) to manage fan speed vs. noise levels vs. maximum power output.
NOTE: Not all fixtures have all modes or functions. Refer to DMX map and User Interface menu tree to see if your product has one or more of these functions.
Output Modes
These modes are selectable at the fixture's DMX control channel or via the fixture's user interface screen.
Boost mode - LED output boosted to >100% of standard output. Fan speeds increased to manage heat level of LED (may be limited to only run for XX hours). Fixture will not exceed NC45-NC55 sound levels in this mode.
Standard mode - Full LED output. Fan speed is set to cool LED appropriately but not exceed NC40 sound level in this mode.
Studio mode - Fan speed reduced to achieve 10% dB reduction from Standard mode and not exceed NC35 sound level. LED output is approximately 80% of Standard output to ensure LEDs operate at optimum temperature and output e ciency. Fan speed remains constant and does not ramp up or down.
Whisper mode - Fan speed reduced to achieve 30% dB reduction from Standard mode and not exceed NC25 sound level. LED output is approximately 60% of Standard output to ensure LEDs operate at optimum temperature and output e ciency. Fan speed remains constant and does not ramp up or down.
Silent mode - fans are turned o or turn very slowly to not contribute to fixture
noise. LED output is capped to ensure LEDs operate at optimum temperature
and output e ciency. Fans are either o or fan speed remains constant. Target
NC15 sound level in this mode.

SOUND PRESSURE LEVEL (dB)

70 NC 55

NC 55 60
NC 55
NC 55 50
NC 50
NC 45 40
NC 40

NC 35

NC 30

NC 25

NC 20

NC 15

0 63

125 250 500 1000 2000 4000 8000 FREQUENCY (HZ)

MOde Boost Mode Standard Mode Studio Mode
Whisper Mode Silent Mode

Led OUTpUT >100%
Full 100% 80%
60% TBC

FAn Speed
Boosted fan speed constant Full 100% constant
Appropriate speed to reduce dB levels >10% of full speed
Appropriate speed to reduce dB levels >30% of full speed Fan off

nOiSe CRiTeRiOn NC45 NC40 NC35
NC25 NC15

eQUiVALenT SOUnd LeVeL dBA (@3M) 50 45
40
35
25

nOiSe CRiTeRiOn

NC-15

NC-20

NC-25

NC-30

NC-35

NC-40

NC-45

NC-50

NC-55

NC-60

NC-65

NC-70

OCTAVe BAnd CenTeR FReQUenCY (HZ)

125

250

500

1000

2000

4000

8000

SOUnd pReSSURe LeVeLS (dB)

vls_adm_fan-tk-jan

W W W.VAR I - L I T E . C O M

FRESNEL TCW/TWW

User Manual

THIS PAGE INTENTIONALLY BLANK

W W W.VAR I - L I T E . C O M

TECHNICAL SUPPORT

GLOBAL 24HR TECHNICAL SUPPORT:
Call: +1 214 647 7880 entertainment.service@signify.com
NORTH AMERICA SUPPORT:
Call: 877-VARI-LITE (877-827-4583) entertainment.service@signify.com
EUROPEAN CUSTOMER SERVICE CENTER:
Call: +31 (0) 543 542 531 entertainment.europe@signify.com

©2024 Signify Holding. All rights reserved. All trademarks are owned by Signify Holding or their respective owners. The information provided herein is subject to change, without notice. Signify does not give any representation or warranty as to the accuracy or completeness of the information included herein and shall not be liable for any action in reliance thereon. The information presented in this document is not intended as any commercial o er and does not form part of any quotation or contract, unless otherwise agreed by Signify. Data subject to change.
FRESNEL TCW/TWW User Manual VERSION DATE: MARCH 19, 2024

References

Home | Vari-Lite

Adobe PDF Library 17.0 Adobe InDesign 19.3 (Windows)