WhalesBot User Manual

Table of Contents

• 1. Main Controller
• 2. Sensors
• 3. Actuators
• 4. Sample Project
• 5. Frequently Asked Questions

More projects available at www.whalesbot.ai

Main Controller

Functions:

• 1. Actuator port
• 2. Actuator port
• 3. Sensor port
• 4. Charging port

Basic Operations:

• 1. Connect the sensor
• 2. Connect the actuator
• 3. Trigger sensor

How to Charge:

Charging: Indicator light turns red.

Charging Completed: Indicator light turns green.

Sensors

Touch Sensor

[Press to trigger]

[Release to stop]

Infrared Sensor

Triggered when an object is detected within range.

Not triggered when no object is detected.

Actuators

Forward and Reverse Smart Motors

When the toggle switch is in the left position, the motor turns anti-clockwise.

When the toggle switch is in the right position, the motor turns clockwise.

Sample Project

Step 1: Assemble the base with two small white blocks and one small red block.

Step 2: Add three blue blocks to the base.

Step 3: Attach two blue blocks and two white blocks to the structure.

Step 4: Connect the controller, infrared sensor, and a robotic arm component.

Step 5: Assemble the main structure with a white block and two small red blocks.

Step 6: Add two white blocks, four blue blocks, and one small red block to the structure.

Step 7: Attach two yellow wheels, two white blocks, and one small red block.

Step 8: The completed robot. When the coding blocks are connected to the robot, its tail moves when you place your hand on top.

Frequently Asked Questions

Charging Operation

1. The controller uses a 3.7V/430mAh lithium battery, which is fixed inside the product and cannot be disassembled.
2. The lithium battery of this product must be charged under the supervision of an adult. It should be charged according to the method or equipment provided by the company. It is forbidden to charge without supervision.
3. Once the power is low, please charge it in time and follow the charging operation.
4. Please avoid using controllers, actuators, sensors, and other components in a humid environment to prevent liquid from flowing in, causing a short circuit of the battery power supply or power terminals short circuit.
5. When the product is not in use, please fully charge it and place it for storage. It needs to be charged at least once every three months.
6. Please use the recommended adapter (5V/1A) to charge this product.
7. When the lithium battery cannot be charged or deformed or overheated during charging, immediately disconnect the power supply and contact the after-sales service department of WhalesBot Company to deal with it. It is strictly forbidden to disassemble without permission.
8. Caution: Do not expose the battery to open flames or dispose of it in a fire.

Warning and Maintenance

Warning

• Regularly check whether the wires, plugs, casings, or other parts are damaged. If any damage is found, stop using the product immediately until it is repaired.
• Children should use this product under the supervision of an adult.
• Do not disassemble, repair, or modify this product by yourself, to avoid product failure and personal injury.
• Do not place it in water, fire, humidity, or high-temperature environment to avoid product failure or safety accidents.
• Do not use it in an environment beyond the product's operating temperature range (0-40°C).

Maintenance

• If not in use for a long time, please store it in a dry and cool environment.
• When cleaning it, please turn off the product and wipe it with a dry cloth or disinfect it with less than 75% alcohol.

Our Goal

Become the No.1 educational robotics brand worldwide.