Hikvision Turbo HD DVR V3.5.37 build180928 Release Note

Basic Information

Reason of Upgrade

Release new K series DVR models: DS-7104HUHI-K1, DS-7108HUHI-K1.

For PoC models, PoC power supply could been enabled or disabled.

For 71/72HQ and 71/72 HU/HT series, all analog channels could be disabled for more IP channels access.

Main Features

1. For PoC models, PoC power supply could been enabled or disabled. It's enabled as default. PoC camera can't be added to this channel when it's disabled.

   Camera Management Interface Description: The interface shows camera signal status, IP camera information, and PoC channel status. Users can enable or disable PoC power supply for each channel. The system indicates the number of connected PoC cameras and the maximum number that can be added.

2. For 71/72HQ and 71/72 HU/HT series, all analog channels could be disabled for more IP channels access. It will work when enable Enhanced IP Mode except HT series (Configuration->General->More settings->Enhanced IP Mode).

   • The number of IP channels that can be added to HU/HT is N as default (N represents the number of analog channels). If the analog channel is disabled, the number of IP channels will become N+N.
   • The number of IP channels that can be added to HQ is N/2 as default (N represents the number of analog channels). If the analog channel is disabled, the number of IP channels will become N/2+N.

   Note: When Enhanced IP Mode is enabled, the VCA of analog channels will be disabled, and 2k/4k output will also be disabled.

3. HQH-K model supports CVI 4MP signal access.
4. Hik-connect unbounding hint is newly added.

Hik-connect Unbounding Hint Description: The configuration interface for Hik-connect shows options for linking and unlinking the device. When the device is not linked and the unlink button is pressed, a message indicating "The device is unlinked" appears. Clicking the link button prompts for a password, showing "The device will unbind with the account." During unbinding, "Unbinding device…Please wait." is displayed. Successful unbinding shows "bound success," while a timeout shows "bound out time."

Modified Functions

1. Delete the video and player option when backup.
2. Hilook Hic-connect interface Modified: For standard firmware, the access type is changed to HiLookVision with the default address litedev.hilookview.com. For neutral firmware, the access type is changed to Guarding Vision with the default address litedev.guardingvision.com.

Related product list:

K Series Turbo HD DVR

• DS-7104HQHI-K1, DS-7108HQHI-K1, DS-7116HQHI-K1
• DS-7204HQHI-K1, DS-7208HQHI-K1, DS-7216HQHI-K1
• DS-7208HQHI-K2, DS-7216HQHI-K2
• DS-7204HQHI-K1/P, DS-7208HQHI-K2/P, DS-7216HQHI-K2/P
• DS-7204HUHI-K1, DS-7208HUHI-K1
• DS-7204HUHI-K2, DS-7208HUHI-K2, DS-7216HUHI-K2
• DS-7204HUHI-K1/P, DS-7208HUHI-K2/P, DS-7216HUHI-K2/P
• DS-7204HTHI-K1, DS-7204HTHI-K2, DS-7208HTHI-K2
• DS-7304HQHI-K4, DS-7308HQHI-K4, DS-7316HQHI-K4
• DS-8108HQHI-K8, DS-8116HQHI-K8
• DS-7304HUHI-K4, DS-7308HUHI-K4, DS-7316HUHI-K4
• DS-8108HUHI-K8, DS-8116HUHI-K8
• DS-9008HUHI-K8, DS-9016HUHI-K8
• DVR-204U-F1, DVR-208U-F1, DVR-216U-F2
• DS-6704HUHI-K, DS-6708HUHI-K, DS-6716HUHI-K
• DS-7104HUHI-K1, DS-7108HUHI-K1

HiLook:

• DVR-204Q-K1, DVR-208Q-K1, DVR-216Q-K1
• DVR-208Q-K2, DVR-216Q-K2
• DVR-204U-K1, DVR-208U-K1, DVR-216U-K2
• HWD-6104MH-G2, HWD-6108MH-G2, HWD-6116MH-G2
• HWD-6208MH-G2, HWD-6216MH-G2
• HWD-7104MH-G2, HWD-7108MH-G2, HWD-7216MH-G2

Customer Impact and Recommended Action

This new firmware upgrade is to improve product performance and will take effect automatically after upgrading from previous versions. Hikvision informs users of the above changes and apologizes for any possible inconvenience of use-habit changes caused by this action.

Contact Information

For questions or concerns, please contact the local technical support team.

Note:

• Hikvision reserves all rights to alter, modify and cancel this notice.
• Hikvision does not provide any guarantee for old models' stock.
• Hikvision is not liable for any typing or printing errors.
• For special model's change details, please contact the local technical support team.

Hikvision Digital Technology CO., Ltd.
No. 555 Qianmo Road, Binjiang District, Hangzhou 310052, China
Tel: +86-571-8807-5998
FAX: +86-571-8993-5635
Email: support@hikvision.com