Index of /
Home | DrayTek
Index of /UK/PSTI
MyVigor - DrayTekHome | DrayTek
User Guide for DrayTek models including: G2542x, VigorSwitch G2542x L2plus Managed Switch, VigorSwitch G2542x, L2plus Managed Switch, Managed Switch, Switch
9 apr 2025 — Hereby, DrayTek Corporation declares that the equipment type VigorSwitch is in compliance with The Electromagnetic. Compatibility Regulations 2016 (SI 2016 No.
File Info : application/pdf, 14 Pages, 1.97MB
DocumentDocumentVigorSwitch G2542x L2+ Managed Switch
Quick Start Guide
Version: 1.0 Firmware Version: V3.9.7 (For future update, please visit DrayTek web site)
Date: April 9, 2025
vi
Intellectual Property Rights (IPR) Information
Copyrights Trademarks
© All rights reserved. This publication contains information that is protected by copyright. No part may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language without written permission from the copyright holders. The following trademarks are used in this document: Microsoft is a registered trademark of Microsoft Corp. Windows 8, 10, 11 and Explorer are trademarks of Microsoft Corp. Apple and Mac OS are registered trademarks of Apple Inc. Other products may be trademarks or registered trademarks of their
respective manufacturers.
Safety Instructions and Approval
Safety Instructions
Warranty
Read the installation guide thoroughly before you set up the switch. The switch is a complicated electronic unit that may be repaired only be
authorized and qualified personnel. Do not try to open or repair the switch yourself. Do not place the switch in a damp or humid place, e.g. a bathroom. The switch should be used in a sheltered area, within a temperature range of +0 to +45 Celsius. Do not expose the switch to direct sunlight or other heat sources. The housing and electronic components may be damaged by direct sunlight or heat sources. Do not deploy the cable for LAN connection outdoor to prevent electronic shock hazards. Do not power off the device when saving configurations or firmware upgrades. It may damage the data in a flash. Please disconnect the Internet connection on the device before powering it off when a TR-069/ ACS server manages the device. Keep the package out of reach of children. When you want to dispose of the switch, please follow local regulations on conservation of the environment. We warrant to the original end user (purchaser) that the switch will be free from any defects in workmanship or materials for a period of two (2) years from the date of purchase from the dealer. Please keep your purchase receipt in a safe place as it serves as proof of date of purchase. During the warranty period, and upon proof of purchase, should the product have indications of failure due to faulty workmanship and/or materials, we will, at our discretion, repair or replace the defective products or components, without charge for either parts or labor, to whatever extent we deem necessary tore-store the product to proper operating condition. Any replacement will consist of a new or re-manufactured functionally equivalent product of equal value, and will be offered solely at our discretion. This warranty will not apply if the product is modified, misused, tampered with, damaged by an act of God, or subjected to abnormal working conditions. The warranty does not cover the bundled or licensed software of other vendors. Defects which do not significantly affect the usability of the product will not be covered by the warranty. We reserve the right to revise the manual and online documentation and to make changes from time to time in the contents hereof without obligation to notify any person of such revision or changes.
vii
EU Declaration of Conformity
Hereby, DrayTek Corporation declares that the equipment type VigorSwitch is in compliance with EU EMC Directive 2014/30/EU, Low Voltage Directive 2014/35/EU and RoHS 2011/65/EU.
The full text of the EU Declaration of Conformity is available at the following internet address:
https://fw.draytek.com.tw/VigorSwitch%20G2542x/Document/CE/
Product name: Model number: Manufacturer: Address:
48*GbE+ 6*10G SFP Switch VigorSwitch G2542x DrayTek Corp. No.26, Fushing Rd., Hukou, Hsinchu Industrial Park, Hsinchu 303, Taiwan
Declaration of Conformity
Hereby, DrayTek Corporation declares that the equipment type VigorSwitch is in compliance with The Electromagnetic Compatibility Regulations 2016 (SI 2016 No.1091), The Electrical Equipment (Safety) Regulations 2016 (SI 2016 No.1101), and The Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment Regulations 2012 (SI 2012 No. 3032).
The full text of the UKCA Declaration of Conformity is available at the following internet address:
https://fw.draytek.com.tw/VigorSwitch%20G2542x/Document/CE/
Product name: Model number: Manufacturer: Address:
48*GbE+ 6*10G SFP Switch VigorSwitch G2542x DrayTek Corp. No.26, Fushing Rd., Hukou, Hsinchu Industrial Park, Hsinchu 303, Taiwan
Regulatory Information
Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver
is connected. Consult the dealer or an experienced radio/TV technician for help. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device may accept any interference received, including interference that may cause undesired operation. Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
viii
More update, please visit www.draytek.com.
USA Local Representative
Company name Address ZIP Code Contact Person
ABP International Inc.
13988 Diplomat Drive Suite 180 Dallas TX 75234
75234
E-mail henry@abptech.com
Mr. Henry N Castillo Tel. (972)831-1600 140
UK PSTI STATEMENT OF COMPLIANCE
We, DrayTek Corp., office at No.26, Fushing Rd., Hukou, Hsinchu Industrial Park, Hsinchu 303, Taiwan, declare under our sole responsibility that the product The full text of the PSTI Declaration of Conformity is available at the following internet address: https://fw.draytek.com.tw/UK/PSTI/ Product name: L2+Management Switch
Model number: VigorSwitch G2542x
Manufacturer: DrayTek Corp.
Address:
No.26, Fushing Rd., Hukou, Hsinchu Industrial Park, Hsinchu 303, Taiwan
is in conformity with the relevant UK Statutory Instruments: The Product Security and Telecommunications Infrastructure (Security Requirements for Relevant Connectable Products) Regulations 2023 ("Security Requirements").
Standard The Product Security and Telecommunications Infrastructure Regulations Support Period
Version 2023 Schedule 1 3 years after the EOS notification
Please note that this statement of compliance, including the Defined Support Period stated herein, is only applicable to products sold in the UK. This Statement of Compliance is retained by DrayTek for 10 years after date of issue.
Hsinchu (place)
9th April 2025 (date)
Alan Wen Chief Executive Officer, CEO
(Legal Signature)
ix
Be a Registered Owner
Web registration is preferred. You can register your Vigor switch via https://myvigor.draytek.com.
Firmware & Tools Updates
Due to the continuous evolution of DrayTek technology, all switches will be regularly upgraded. Please consult the DrayTek web site for more information on newest firmware, tools and documents. https://www.draytek.com
x
1. Package Content
VigorSwitch G2542x
Quick Start Guide
Rack Mount Kit (brackets) &
Console Cable
The type of the power cord depends on the country that the switch will be installed.
UK-type Power Cord
EU-type Power Cord
USA/Taiwan-type Power Cord
AU/NZ-type Power Cord
If any of these items is found missing or damaged, please contact your local supplier for replacement.
1
2. Panel Explanation
For G2542x
Port 1 to 48 (GbE RJ45)
LED Port 1 ~ 48 (GbE RJ45)
Port 49 ~ 54 (SFP+) Monitor
SYS PWR
Port 49 to 54 (SFP+)
Status
Explanation
On (Green) On (Amber) Blinking
Off On (Green) On (Blue) Blinking
Off On (Red)
Off
On (Green) Blinking (Green) Off On (Green) Off 0
1
2 to F r
Off
The device is connected with 1000Mbps. The device is connected with 10/100Mbps. The system is sending or receiving data through the port. The port is disconnected or the link is failed.
The device is connected with 1000Mbps. The device is connected with 10Gbps. The system is sending or receiving data through the port. The port is disconnected or the link is failed. An alert for system failure due to overheating or wrong voltage. The device is in normal condition and running normally. The switch finishes system booting and the system is ready. The switch is powered on and starts system booting. The power is off or the system is not ready / malfunctioning. The device is powered on and running normally. The device is not ready or is failed. The switch is in the master mode of stacking. The switch is in slave mode or provided the highest priority. It serves more than 2 stacking members as the "Secondary Master". The switch is in the slave mode of stacking. The switch does not join the stacking members or joins but over the number of members. The device is in stand alone mode.
2
DC Power In Interface RST
On (Green)
DC+12V (Vin1) - The power supply with +12VDC is good.
Off
The device is not ready or is failed.
Description Factory reset button.
Stacking scan button. Press the Scan button to auto-scan the join stacking members.
Port 1 ~ 48 (2.5GbE RJ45) Port 49 ~ 54 (SFP+)
Port 1 to Port 48 can be used for Ethernet connection. Port 49 to Port 54 are used for 10G/1000M fiber connection.
Interface Console
Description Power inlet for AC input (100~240V/AC, 50/60Hz).
DC power in for power failover (System power). +12VDC/5A (Vin) Used to perform telnet command control.
3
3. Hardware Installation
Before starting to configure the switch, you have to connect your devices correctly.
3.1 Network Connection
Able to connect Non-PoE devices Use the Ethernet cable(s) to connect None-PoE devices to the Vigor switch. All device ports are in the same local area network. Here, we take VigorSwitch G2542x as an example.
4
3.2 Rack-Mounted Installation
The switch can be installed easily by using rack mount kit. 1. Attach the brackets to the chassis of a 19-inch rack. The second bracket
attaches the other side of the chassis as above procedure. 2. After the bracket installation, the VigorSwitch's chassis can be installed in a
rack by using four screws for each side of the rack.
5
4. Software Configuration
In this section, we take VigorSwitch G2542x as an example.
Before using the switch, perform the following steps: 1. Set up a physical path between the configured the switch and a PC by a
qualified UTP Cat. 5e cable with RJ-45 connector. If a PC directly connects to the switch, you have to setup the same subnet mask for PC and the switch. Default values of the managed switch are listed as follows:
IP Address Subnet Mask DHCP Client Username Password
192.168.1.224 255.255.255.0 Enabled (On) admin admin
2. After configuring correct IP address on your PC, open your web browser and access switch's IP address.
3. Please enter "admin/admin" as the Username/Password and click Login.
6
4. Next, a page will appear to guide you change the login password. You MUST change the login password before accessing the web user interface. Please click OK.
5. Set a new password with the highest level of strength for network security.
6. Click OK. Vigor system will guide you to login with the new password again. Enter the new Username/Password and click Login.
7
7. Later, the home page of VigorSwitch will be shown on the screen.
8
Customer Service
If the switch cannot work correctly after trying many efforts, please contact your dealer for further help right away. For any questions, please feel free to send e-mail to support@draytek.com.
GPL Notice
This DrayTek product uses software partially or completely licensed under the terms of the GNU GENERAL PUBLIC LICENSE. The author of the software does not provide any warranty. A Limited Warranty is offered on DrayTek products. This Limited Warranty does not cover any software applications or programs. To download source codes please visit: http://gplsource.draytek.com GNU GENERAL PUBLIC LICENSE: https://gnu.org/licenses/gpl-2.0 Version 2, June 1991 For any question, please feel free to contact DrayTek technical support at support@draytek.com for further information.
9