Installation Guide for icp models including: PCIE-Q470 Full-size PICMG 1.3 CPU Card, PCIE-Q470, Full-size PICMG 1.3 CPU Card, CPU Card, Card
PCIE-Q470-R10 | Industrial Computer and Components from ICP IEI
IEI Resource Download - IEI
File Info : application/pdf, 19 Pages, 692.51KB
DocumentDocumentFull-size PICMG 1.3 CPU Card Supports 10th/11th Gen. LGA1200 Intel® CoreTM i9/i7/i5/i3, Pentium® and Celeron® Processors, Intel® Q470, DDR4, HDMI, Dual Intel® 2.5GbE, USB 3.2, SATA 6Gb/s, M.2, iAudio and RoHS PCIE-Q470 Quick Installation Guide Version 1.0 March 1, 2022 Package List PCIE-Q470 package includes the following items: 1 x PCIE-Q470 single board computer 1 x SATA cable 1 x Mini jumper pack 1 x QIG ©2022 Copyright by IEI Integration Corp. All rights reserved. Specifications CPU: 10th/11th Generation LGA1200 Intel® CoreTM i9/i7/i5/i3, Pentium® and Celeron® processors Chipset: Intel® Q470 Memory: Four 288-pin 2933 MHz dual-channel DDR4 DIMM slots supporting up to 128 GB memory BIOS: AMI UEFI BIOS Graphics Engine: 10th Generation CML-S: up to Intel® UHD Graphics 630, Intel® HD 9th Generation Display Engine based on 16 low power execution units supporting DX2015, OpenGL 5.X and OpenCL2.x, ES 2.0 11th Generation RKL-SXe: 12th Generation Graphics Architecture, Intel® UHD Graphics 750, supporting 12-bit end-to-end, AV1, VP9, HEVC 12b, HDR10, FP16 Display Output: 1 x HDMI 1.4 (up to 4096 x 2160 @ 30 Hz) Ethernet: LAN1: Intel® I225V 2.5GbE controller (colay with I225-LM) LAN2: Intel® I225V 2.5GbE controller (colay with I225-LM) External I/O Interface: 2 x USB 3.2 Gen 1 (5Gb/s) (Type-A) 1 x USB 3.2 Gen 2 (10Gb/s) (Type-C) Internal I/O Interface: 4 x SATA 6Gb/s (RAID 0/1/5/10 supported) 6 x USB 2.0 (2x4 pin, p=2.54) 2 x USB 3.2 Gen 1 (5Gb/s) (2x10 pin, p=2.0) 1 x USB 3.2 Gen 1 (Type-A, 180°) 2 x RS-232 (2x5 pin, p=2.0) 2 2 x RS-422/485 (1x4 pin, p=2.0) Audio: 1 x IAUDIO connector supporting IEI AC-KIT-888S audio module (2x5 pin, p=2.0) Front Panel: 1 x Front panel (2x7 pin, p=2.54; power LED, HDD LED, power button, reset button, speaker) LAN LED: 2 x LAN LED (1x2 pin, p=2.54) Expansions: 1 x PCIe x16 signal via golden finger (supporting x16, or x8 + x8, or x4 + x4 + x8) 4 x PCIe x1 signal from PCH via golden finger (supporting one x4, or four x1) 4 x PCI signal via golden finger 1 x M.2 2230 A Key (PCIe x2 & USB 2.0) 1 x M.2 3042/3052 B Key w/ SIM holder (PCIe Gen3 x2) 1 x M.2 2280/2242 M Key on solder side (PCIe x4) Digital I/O: 1 x 12-bit digital I/O (2x7 pin, p=2.0) SMBus: 1 x SMBus (1x4 pin, p=1.25) I2C: 1 x I2C (1x4 pin, p=1.25) Fan Connector: 1 x CPU fan connector (1x4 pin) 1 x System fan connector (1x4 pin) Chassis Intrusion: 1 x Chassis intrusion connector (1x2 pin, p=2.54) TPM: Intel® PTT (TPM 2.0) 3 Power Supply: ATX/AT power supply Support AT/ATX mode ErP/EuP compliant Power Consumption: 3.3V@1.04A, 5V@8.61A, 12V@12.33A (Intel® CoreTM i9-11900K CPU with 4 GB 3200 MHz DDR4 memory) Watchdog Timer: Software programmable support 1255 sec. system reset Operation Temperature: 0°C 60°C Storage Temperature: -30°C 70°C Operation Humidity: 5% 95%, non-condensing Dimensions: 338 mm x 126 mm Weight: GW:1000 g / NW:500 g Safety: CE/FCC compliant All the drivers and utility for the PCIEQ470 are available on IEI Resource Download Center. Type PCIE-Q470 and press Enter to find all the relevant software, utilities, and documentation. To install software from the downloaded ISO file, mount the file as a virtual drive to view its content. IEI Resource Download Center https://download.ieiworld.com 4 Ordering Information PCIE-Q470-R10: Full-size PICMG 1.3 CPU card supports 10th/11th Gen. LGA1200 Intel® CoreTM i9/i7/i5/i3, Pentium® and Celeron® processors, Intel® Q470, DDR4 DIMM, HDMI, dual Intel® 2.5GbE, USB 3.2 Gen 2, SATA 6Gb/s, M.2, iAudio and RoHS CB-USB02-RS: Dual port USB cable with bracket, 300mm, p=2.54 32102-000100-200-RS: SATA power cable, MOLEX 8981-4M to SATA15P, 150mm 32205-002700-200-RS: RS-232/422/485 cable, 200mm, p=2.0 AC-KIT-888S-R10: Realtek ALC888S 7.1 Channel HD Audio peripheral board, RoHS CF-1150SA-R10 Special cooler kit for LGA1150, high-performance compatible, 95W CF-1150SB-R11 Special cooler kit for LGA1150, high-performance compatible, 65W CF-1150SC-R20 Special cooler kit for LGA1150, 1U chassis compatible, 65W CF-1150SE-R11 Special cooler kit for LGA1150, high-performance compatible, 95W 5 Jumpers Setting and Connectors LABEL J_ATX_AT1 SW_BIOS1_1 J_CMOS1 J_FLASH1 CPU12V1 J_AUDIO1 BAT1 CHASSIS1 CHA_DIMM0, CHA_DIMM1 CHB_DIMM0, CHB_DIMM1 DIO1 DBG_SPI1 CPU_FAN1, SYS_FAN1 JSPI1 JEC1 F_PANEL1 I2C1 LED_LAN1 LED_LAN2 M2_A1 M2_B1 M2_M1 PWR_SW1 COM1, COM2 COM3, COM4 S_ATA3, S_ATA4, S_ATA5, S_ATA6 SMB1 SIM1 JUSB3, JUSB4, JUSB5 FUNCTION AT/ATX power mode setting BIOS selection switch Clear CMOS jumper Flash descriptor security override jumper ATX CPU 12V power connector Audio connector RTC battery connector Chassis intrusion connector DDR4 DIMM slots Digital I/O connector EC debug connector Fan connectors Flash SPI ROM connector Flash EC ROM connector Front panel connector I2C connector LAN1 link LED connector LAN2 link LED connector M.2 A-key slot M.2 B-key slot M.2 M-key slot (on solder side) On-board power switch RS-232 serial port connectors RS-422/485 serial port connectors SATA 6Gb/s connectors SMBus connector SIM card slot Internal USB 2.0 connectors 6 USB1 JUSB3-1 LAN1, LAN2 HDMI1 CN1, CN2 CON1 Internal USB 3.2 Gen 1 connector (Type-A) Internal USB 3.2 Gen 1 connector External 2.5GbE RJ-45 connectors External HDMI connector External USB 3.2 Gen 1 connectors External USB 3.2 Gen 2 connector J_ATX_AT1: AT/ATX Power Mode Setting PIN NO. DESCRIPTION Short 1 - 2 ATX Power Mode (default) Short 2 - 3 AT Power Mode SW_BIOS1_1: BIOS Selection Switch PIN NO. DESCRIPTION Short A - B BIOS1: four PCIe x1 slots (default) Short B - C BIOS2: one PCIe x4 slot J_CMOS1: Clear CMOS Jumper Status NC Press DESCRIPTION Keep CMOS Setup (Normal Operation) Clear CMOS Setup J_FLASH1: Flash Descriptor Security Override Jumper PIN NO. DESCRIPTION Short 1-2 Disabled (default) Short 2-3 Enabled 7 USB Power SW: USB Power Setting USB Power SW DESCRIPTION +5V DUAL Power is provided in S3/S4 sleep state (default) +5V Power is not provided in S3/S4 sleep state Use the USB Power SW BIOS options to configure whether to provide power to the corresponding USB connector(s) when the system is in S3/S4 sleep state. This option is valid only when the above Power Saving Function (ERP) BIOS option is disabled. CPU12V1: ATX CPU 12V Power Connector PIN NO. DESCRIPTION PIN NO. 1 GND 5 2 GND 6 3 GND 7 4 GND 8 DESCRIPTION +12V +12V +12V +12V J_AUDIO1 : Internal Audio Connector for IEI Audio Module PIN NO. DESCRIPTION PIN NO. DESCRIPTION 1 HDA_SYNC 2 HDA_BIT_CLK 3 HDA_SDOUT 4 HDA_SPKR 5 HDA_SDIN 6 HDA_RST# 7 HDA_VCC 8 HDA_GND 9 HDA_+12V 10 HDA_GND BAT1: RTC Battery Connector PIN NO. DESCRIPTION 1 VBATT PIN NO. 2 DESCRIPTION GND 8 CHASSIS1: Chassis Intrusion Connector PIN NO. DESCRIPTION PIN NO. 1 +3.3VSB 2 DESCRIPTION CHASSIS_OPEN DIO1 : Digital Input/Output Connector PIN NO. DESCRIPTION PIN NO. 1 GND 2 3 Output 5 4 5 Output 3 6 7 Output 1 8 9 Input 5 10 11 Input 3 12 13 Input 1 14 DESCRIPTION VCC Output 4 Output 2 Output 0 Input 4 Input 2 Input 0 DBG_SPI1: EC Debug Connector PIN NO. DESCRIPTION 1 NC 2 EDICS 3 EDIDO PIN NO. 4 5 6 DESCRIPTION EDICLK EDIDI GND CPU_FAN1, SYS_FAN: CPU/System Fan Connector PIN NO. DESCRIPTION PIN NO. DESCRIPTION 1 GND 3 FANIO 2 +12V 4 PWM JSPI1: Flash SPI ROM Connector PIN NO. DESCRIPTION 1 +V3.3M_SPI_CON 2 SPI_CS 3 SPI_SO_SW PIN NO. 4 5 6 DESCRIPTION SPI_CLK_SW SPI_SI_SW GND 9 JEC1: Flash EC ROM Connector PIN NO. DESCRIPTION 1 FSCE# 3 FMISO 5 EC_DET_FLASH 7 GND PIN NO. 2 4 6 8 DESCRIPTION VCC NC FSCK FMOSI F_PANEL1: Front Panel Connector PIN DESCRIPTION PIN 1 PWR_LED+ 2 PWR LED 3 NC 4 5 PWR_LED- 6 PWR 7 BTN 9 PWR_BTN+ 8 PWR_BTN- 10 HDD 11 HDD_LED+ 12 LED 13 HDD_LED- 14 DESCRIPTION BEEP_PWR NC NC PC_BEEP NC Reset+ Reset- SPKR RESET I2C1: I2C Connector PIN NO. DESCRIPTION 1 GND 2 I2C_DATA PIN NO. 3 4 DESCRIPTION I2C_CLK +5V LED_LAN1: LAN1 Link LED Connector PIN DESCRIPTION PIN 1 +3.3V 2 DESCRIPTION LAN1_LED_LNK#_ACT LED_LAN2: LAN2 Link LED Connector PIN DESCRIPTION PIN 1 +3.3V 2 DESCRIPTION LAN2_LED_LNK#_ACT 10 COM1, COM2: RS-232 Serial Port Connectors PIN NO. DESCRIPTION PIN NO. 1 DCD 2 3 RXD 4 5 TXD 6 7 DTR 8 9 GND 10 DESCRIPTION DSR RTS CTS RI GND COM3, COM4: RS-422/428 Serial Port Connectors PIN NO. DESCRIPTION PIN NO. DESCRIPTION 1 RXD422- 3 TXD422+/TXD485+ 2 RXD422+ 4 TXD422-/TXD485- S_ATA3, S_ATA4, S_ATA5, S_ATA6: SATA 6Gb/s Connectors PIN NO. 1 DESCRIPTION GND PIN NO. 5 DESCRIPTION SATA_RX- 2 SATA_TX+ 6 SATA RX+ 3 SATA_TX- 7 GND 4 GND 8 N/C SMB1: SMBus Connector PIN NO. DESCRIPTION 1 GND 2 SMB_DATA PIN NO. 3 4 DESCRIPTION SMB_CLK +5V 11 JUSB3, JUSB4, JUSB5: Internal USB 2.0 Connectors PIN NO. DESCRIPTION PIN NO. DESCRIPTION 1 VCC 2 GND 3 USB_DATA- 4 USB_DATA+ 5 USB_DATA+ 6 USB_DATA- 7 GND 8 VCC USB1: Internal USB 3.2 Gen 1 Connector (Type-A) PIN NO. DESCRIPTION PIN NO. DESCRIPTION 1 VCC 6 USB3_RX+ 2 USB_DATA- 7 3 USB_DATA+ 8 4 GND 9 GND USB3_TXUSB3_TX+ 5 USB3_RX- JUSB3-1: Internal USB 3.2 Gen 1 Connector PIN NO. DESCRIPTION PIN NO. 1 VCC 11 2 USB_RX- 12 3 USB_RX+ 13 4 GND 14 5 USB3_TX- 15 6 USB3_TX+ 16 7 GND 17 8 USB3_DATA- 18 9 USB3_DATA+ 19 10 NC DESCRIPTION USB_DATA+ USB_ DATA- GND USB3_TX+ USB3_ TX- GND USB3_RX+ USB3_RX- VCC M2_A1: M.2 A-key Slot PIN NO. DESCRIPTION 1 GND 3 USB+ 5 USB- PIN NO. 2 4 6 12 DESCRIPTION +3.3V +3.3V NC 7 GND 8 9 Module Key 10 11 Module Key 12 13 Module Key 14 15 Module Key 16 17 NC 18 19 NC 20 21 NC 22 23 GND 24 25 NC 26 27 NC 28 29 GND 30 31 NC 32 33 GND 34 35 PCIE_TXP1 36 37 PCIE_TXN1 38 39 GND 40 41 PCIE_RXP1 42 43 PCIE_RXN1 44 45 GND 46 47 PCIE_CLKP0 48 49 PCIE_CLKN0 50 51 GND 52 53 CLKREQ0# 54 55 PCIE_WAKE 56 57 GND 58 59 PCIE_TXP2 60 61 PCIE_TXN2 62 63 GND 64 65 PCIE_RXP2 66 67 PCIE_RXN2 68 69 GND 70 71 PCIE_CLKP1 72 73 PCIE_CLKN1 74 75 GND 13 Module Key Module Key Module Key Module Key NC GND NC NC GND NC NC GND NC NC GND NC NC NC NC NC NC NC PLT_RST Pull up +3.3V Pull up +3.3V M2_DAT M2_CLK NC NC M2_RST CLKREQ0# PCIE_WAKE +3.3V +3.3V M2_M1: M.2 M-key Slot PIN NO. DESCRIPTION 1 GND 3 GND 5 PCIE_RXN3 7 PCIE_RXP3 9 GND 11 PCIE_TXN3 13 PCIE_TXP3 15 GND 17 PCIE_RXN2 19 PCIE_RXP2 21 GND 23 PCIE_TXN2 25 PCIE_TXP2 27 GND 29 PCIE_RXN1 31 PCIE_RXP1 33 GND 35 PCIE_TXN1 37 PCIE_TXP1 39 GND 41 PCIE_RXN0 43 PCIE_RXP0 45 GND 47 PCIE_TXN0 49 PCIE_TXP0 51 GND 53 REFCLKN 55 REFCLKP 57 GND 59 Module Key 61 Module Key 63 Module Key PIN NO. 2 4 6 8 10 12 14 16 18 20 22 24 26 28 30 32 34 36 38 40 42 44 46 48 50 52 54 56 58 60 62 64 14 DESCRIPTION +3.3V +3.3V N/C N/C DAS/DSS# +3.3V +3.3V +3.3V +3.3V N/C N/C N/C N/C N/C N/C N/C N/C N/C DEVSLP N/C N/C N/C N/C N/C PERST# CLKREQ# PEWAKE N/C N/C Module Key Module Key Module Key 65 Module Key 66 67 NC 68 69 PEDET 70 71 GND 72 73 GND 74 75 GND Module Key SUSCLK +3.3V +3.3V +3.3V M2_B1: M.2 B-key Slot PIN NO. DESCRIPTION 1 CONFIG_3 3 GND 5 GND 7 USB+ 9 USB- 11 GND 13 Module Key 15 Module Key 17 Module Key 19 Module Key 21 CONFIG_0 23 PCH_WAKE_N 25 NC 27 GND 29 PCIE_RXN1 31 PCIE_RXP1 33 GND 35 PCIE_TXN1 37 PCIE_TXP1 39 GND 41 PCIE_RXP0 43 PCIE_RXN0 45 GND 47 PCIE_TXN0 49 PCIE_TXP0 PIN NO. 2 4 6 8 10 12 14 16 18 20 22 24 26 28 30 32 34 36 38 40 42 44 46 48 50 15 DESCRIPTION +3.3V +3.3V NC NC NC Module Key Module Key Module Key Module Key NC NC NC NC NC SIM_RST SIM_CLK SIM_IO SIM_VCC NC NC NC NC NC NC M2_RST 51 GND 52 CLKREQ0# 53 PCIE_CLKN0 54 PCH_WAKE_N 55 PCIE_CLKP0 56 NC 57 GND 58 NC 59 NC 60 NC 61 NC 62 NC 63 NC 64 NC 65 NC 66 NC 67 M2_RST 68 NC 69 M2BCONF 70 +3.3V 71 GND 72 +3.3V 73 GND 74 +3.3V 75 GND SIM1: SIM Card Slot PIN NO. DESCRIPTION C1 SIM_VCC C2 SIM_RST C3 SIM_CLOCK PIN NO. C5 C6 C7 DESCRIPTION GND NC SIM_IO 16 LAN1, LAN2: External 2.5GbE RJ-45 Connectors PIN NO. DESCRIPTION PIN NO. DESCRIPTION 1 MDIA3- 5 2 MDIA3+ 6 3. MDIA2- 7 4. MDIA1- 8 MDIA1+ MDIA2+ MDIA0MDIA0+ HDMI1: External HDMI Connector PIN NO. DESCRIPTION 21 HDMI_DATA2 22 GND 23 HDMI_DATA2# 24 HDMI_DATA1 25 GND 26 HDMI_DATA1# 27 HDMI_DATA0 28 GND 29 HDMI_DATA0# 30 HDMI_CLK PIN NO. 31 32 33 34 35 36 37 38 39 DESCRIPTION GND HDMI_CLK# N/C N/C HDMI_SCL HDMI_SDA GND +5V HDMI_HPD CN1, CN2: External USB 3.2 Gen 1 Connectors (Type-A) PIN NO. DESCRIPTION PIN NO. DESCRIPTION 1 VCC 6 USB3_RX+ 2 USB_DATA- 7 GND 3 USB_DATA+ 8 USB3_TX- 4 GND 9 USB3_TX+ 5 USB3_RX- 17 CON1: External USB 3.2 Gen 2 Connector (Type-C) PIN NO. DESCRIPTION PIN NO. DESCRIPTION A1 GND B12 GND A2 TX1+ B11 RX1+ A3 TX1- B10 RX1- A4 VBUS B9 VBUS A5 CC1 B8 SBU2 A6 D+ B7 NC A7 D- B6 NC A8 SBU1 B5 VCONN A9 VBUS B4 VBUS A10 RX2- B3 TX2- A11 RX2+ B2 TX2+ A12 GND B1 GND 18 Board Layout: Jumper and Connector Locations (Unit: mm) 19