Camden Door Controls is the industry leading manufacturer of door activation and locking products.
Installation Guide for CAMDEN DOOR CONTOLS models including: CM-40, CM-41, CM-60, CM-40 Series All Active Push Plate, CM-40 Series, All Active Push Plate, Active Push Plate, Push Plate, Plate
Entrex: Resources - Canada
Entrex: Installation Manuals - Canada
Print Materials - Camden Door Controls
File Info : application/pdf, 5 Pages, 792.87KB
DocumentDocumentDoor Activation Devices CM-40, CM-41 & CM-60 Series Push Plate INSTALLATION INSTRUCTIONS THIS PACKAGE INCLUDES: (1) "All Active" Push Plate (1) Parts kit CM-40 CM-41 CM-60 1. GENERAL DESCRIPTION 3. APPLICATION Camden Door Controls CM-40 (4 1/2'' round faceplate), CM-41 (4 Camden all-active switches are designed for areas where an 1/2'' round faceplate with 4 1/2'' square back plate) and easy-to-activate, high visibility switch is desired. Ideal for high-traffic CM-60 Series (6'' round faceplate) `all active' push plate switches areas, hospitals, wheelchair access, seniors' residences, etc. They can are heavy-duty, weather resistant and ADA compliant door activation be surface or flush mounted. switches. The CM-40 and CM-41 switches mount to standard 2 x 4 electrical boxes. The faceplates are stainless steel or solid brass, Camden all-active switches are designed to control electric strikes, and the assembly is designed for easy installation in single-gang electromagnetic locks, and automatic doors. They may also be used electrical boxes, or with included adapter plate double-gang and for shunting, bypassing alarms, request to exit, timed functions, and 4x4 boxes. The switches are UL/CSA approved, and rated 15 amps @ many other applications. 30 VDC. The push switches are offered with different graphics, and in various architectural finishes. Watertight configurations are also The switches are made for high frequency usage, in both indoor and available. outdoor environments. Camden switches are versatile, and can be 2. SPECIFICATIONS supplied in various configurations and finishes, to suit any commercial, industrial, or institutional application. Voltage Contact Type 12/24V DC SPDT FORM `C Faceplate Switch Type Momentary Contact Rating 15A @ 30 VDC Temp. Range -40°F to 140°F (-40°C to 60°C) Std. Finish CM-40, CM-41 & CM-60: US32/630 CM-40 SERIES: 4 ½'' DIA x 1 ''D (114mm x 34mm) Dimensions CM-41 SERIES: 4 ½`' H x 4 ½ '' W x 1 ''D (114mm x 114mm x 34mm) CM-60 SERIES: 6`' DIA x 1 3/8`' D (152mm x 34mm) Switch Connecting Wires Page 1 of 5 CM-40, CM-41 & CM-60 Series Push Plate INSTALLATION INSTRUCTIONS 4. DIMENSIONS Ø4 1 2 '' (114mm) 412'' (114mm) 38'' (9mm) 4 21'' (114mm) 138 '' (34mm) Ø412'' (114mm) Ø6'' (152mm) 3 1 4 '' (83mm) CM-41 Series CM-40 Series CM-60 Series CM-60 Series Back View 5. INSTALLATION AND WIRING Mounting Options: · The CM-40, CM-41 and CM-60 can be installed using either flush or surface mounting methods. Selecting a Surface Mount Enclosure: · Refer to the "Parts and Information" section (Page 5) to choose a suitable Enclosure. Installation Process: · Use two #6-32 x 1 1/4" screws for mounting. · Insert the screws into the designated mounting holes, but do not fully tighten them at this stage. Attaching the Switch: · Align the switch so that the screw heads slide into the slots on the back of the switch. Wall #6-32 x 1/1/4'' Hex Screw · Once the switch is in position, proceed to secure it in place. Securing the Switch: · Insert the hex key into the holes on the faceplate to access and tighten the screws. Surface Mount Enclosure #6-32 x 1-1/4'' Hex Screw Wall #6-32 x 1-1/4'' Hex Screw Surface Mount Wall Wall Enclosure #6-32 x 1-1/4'' Hex Screw CM-40 Flush Mount Adapter Plate #6-32 x 1/2'' Pan Head Phillips Screw #6-32 x 1-1/4'' Hex Screw Wall CM-40/60 Surface Mount CM-41 Flush Mount CM-41 Surface Mount Page 2 of 5 CM-60 Flush Mount Note: To flush mount the CM-60, first secure the adapter plate using four #6-32 x 1/2" pan head Phillips screws. WIRING 1T Switch is not pressed SPDT N.C. Not Used Disconnected N.O. CM-40, CM-41 & CM-60 Series Push Plate INSTALLATION INSTRUCTIONS Switch is pressed SPDT N.C. Not Used 1T Connected N.O. SWITCH STATE Not Pressed Pressed 6.PARTS INFORMATION Momentary: When the switch is pressed, the current pole will change to the opposite state until released WIRING LAYOUT COM Terminal Connected Connected NO Terminal Disconnected Connected NC Terminal Not Used Not Used Connection Status No Connection COM connected to NO 3 2 1B 1B 1A 1E 1A 1F 1C 1G PARTS KIT 60-34B031: CM-40 & CM-41 Series Parts Kit PARTS KIT 60-34B032: CM-60 Series Parts Kit Page 3 of 5 CM-40, CM-41 & CM-60 Series Push Plate INSTALLATION INSTRUCTIONS MODEL NUMBER CM-40 Series CM-41 Series CM-60 Series MODEL NUMBERS DESCRIPTION 4 1/2'' ROUND PUSH PLATE SWITCH 4 1/2" ROUND PUSH PLATE SWITCH WITH SQUARE BACK PLATE 6'' ROUND PLATE SWITCH PARTS KIT ITEM NUMBER PART NUMBER FOR CM-40 & CM-41 SERIES 60-34B031 1 FOR CM-60 SERIES 60-34B032 ITEM NUMBER 2 PART NUMBER CM-XX/1 CM-XX/2 CM-XX/A2 CM-XX/2AL CM-XX/2AR CM-XX/3 CM-XX/3F CM-XX/4 CM-XX/A4 CM-XX/4AL CM-XX/4AR CM-XX/4F CM-XX/8 CM-XX/8B CM-XX/8F CM-XX/8D ITEM NUMBER - * For CM-60 Only PART NUMBER 60-40C020 DESCRIPTION (A) SMALL HEX KEY 5/64" SHORT ARM (B) 6-32 X 1-1/4" S/S BUTT HEAD SOCKET CAP SCREW (C)GREY PLASTIC WIRE NUT C/W SPRING (D) SMALL HEX KEY 5/64" SHORT ARM (E) 6-32 X 1-1/4'' BUTT HEAD SOCKET CAP SCREW (F) 6-32 X 1/2" PAN ZINC PLATED PHILLIPS SCREW (G) GREY PLASTIC WIRE NUT C/W SPRING FACE PLATE GRAPHIC OPTIONS DESCRIPTION BLANK STAINLESS-STEEL FACEPLATE WHEELCHAIR LOGO IN BLUE IN BLUE FACEPLATE WITH MAN IN ACTION LOGO IN BLUE WHEELCHAIR LOGO WITH ARROW POINTING LEFT IN BLUE WHEELCHAIR LOGO WITH ARROW POINTING RIGHT IN BLUE `'PUSH TO OPEN'' GRAPHICS IN BLACK `'POUSSEZ POUR OUVRIR'' GRAPHICS IN BLACK WHEELCHAIR LOGO WITH `'PUSH TO OPEN'' LOGO IN BLUE MAN IN ACTION LOGO WITH `PUSH TO OPEN' LOGO IN BLUE WHEELCHAIR LOGO WITH `' PUSH TO OPEN AND ARROW POINTING TO THE LEFT'' LOGO IN BLUE WHEELCHAIR LOGO WITH `' PUSH TO OPEN AND ARROW POINTING TO THE RIGHT'' LOGO IN BLUE WHEELCHAIR LOGO WITH `'POUSSEZ POUR OUVRIR'' LOGO IN BLUE `'PUSH TO LOCK'' LOGO IN BLACK LOCK SYMBOL IN BLACK WITH `' PUSH TO LOCK'' LOGO IN BLACK `'POUSSEZ POUR VERROUILLER'' GRAPHICS IN BLACK `'PUSH TO LOCK DOOR'' GRAPHICS IN BLACK Adapter Plate* DESCRIPTION Adapter Plate for CM-60 Only Page 4 of 5 CM-40, CM-41 & CM-60 Series Push Plate INSTALLATION INSTRUCTIONS CM-xx/1 CM-xx/2 CM-xx/A2 CM-xx/2AL CM-xx/2AR CM-xx/3 CM-xx/3F CM-xx/4 CM-xx/A4 CM-xx/4AL CM-xx/4AR CM-xx/4F TO LOCK CM-xx/8 TO LOCK CM-xx/8B VERROUILLER CM-xx/8F TO LOCK DOOR CM-xx/8D ITEM NUMBER 3 PART NUMBER FOR CM-40 SERIES CM-47S CM-49 CM-59s FOR CM-41 SERIES CM-43CBL CM-48AL CM-44 CM-540b CM-67 CM-49C FOR CM-60 SERIES CM-69S CM-89s COMPATIBLE MOUNTING BOXES DESCRIPTION SURFACE, ROUND, STANDARD DEPTH, PROVISION FOR WIRELESS. BLACK POLYMER (ABS) FLAME AND IMPACT RESISTANT, 5" X 1-3/4"D Surface/Flush mount kit includes CM-49A, CM49B, CM-49C and CM-49G. 8-3/4" x 2 Surface, Round, Standard Depth. Heavy gauge stainless steel 7-3/4" x 1-1/8" Black polymer (ABS) Surface box, standard depth, provision for wireless, double wall Anodized aluminum surface box, shallow depth Surface Box, Shallow Depth, offset mount (on jamb). Stainless Steel 4-1/2" W x 4-1/2"H x 5/8"D. Surface Box, Shallow Depth. Flame and Impact resistant black polymer (ABS) 4-13/16" x 4-13/16" x 5/8'' Sleeve Cover for standard double gang surface box. Heavy gauge stainless steel Adapter plate for mounting on double gang or 4" Square box 4" x 1/16" Surface, Round Standard Depth, provision for wireless. black polymer (ABS) Flame and impact resistant, 6-1/2" x 1-3/4"D Surface, Round Standard Depth. Heavy gauge stainless steel 9-5/8" x 1-1/2" Opening New Doors to Call: 1.877.226.3369 / 905.366.3377 Innovation, Quality and Support! Visit: www.camdencontrols.com File: CM-40, CM-41 & CM-60 Series Push Plate Rev.: 21 June 2024 Part No.: 40-82B280 Page 5 of 5