Nilfisk Core 130 Powercontrol Quick Start Guide
Manufacturer: Nilfisk
Product: Core 130 Powercontrol High Pressure Washer
Document Reference: 128336337 (10.2020)
Kornmarksvej 1, DK-2605 Broendby, Denmark | Tel.: (+45) 4323 8100
Important Information
⚠️ Caution: Read the instructions before using the machine.
Section A: Parts Identification [package contents]
The package includes the following components:
- Nilfisk Core 130 Powercontrol main unit (x1)
- Handle assembly parts (x1 each)
- Wheels (x2)
- Hose connector (x1)
- High-pressure hose (x1)
- Spray gun (x1)
- Spray lances (x2)
- Nozzles (various types, x1 each)
- Detergent bottle (x1)
- Screws (x6)
- Other small accessories (x1 each)
Section A: Assembly Instructions
Follow these steps to assemble the pressure washer:
- Steps 1-4: Attach the main handle to the unit using the provided screws.
- Step 5: Remove protective caps from the unit. Dispose of them in a trash receptacle ?️.
- Step 6: Connect the high-pressure hose to the machine's water outlet. Ensure a secure connection (✔️). Avoid forcing if misaligned (❌).
- Step 7: Connect the spray lance to the spray gun. Ensure a secure connection (✔️). Avoid forcing if misaligned (❌).
- Step 8: Attach the handle bracket.
- Steps 9-10: Securely attach the main handle assembly to the unit using screws.
- Step 11: Connect the spray gun to the appropriate lance. The connection should click into place and lock ?.
- Steps 12-13: Attach the detergent bottle to its designated holder on the unit.
- Steps 14-15: Store the high-pressure hose neatly on the unit's integrated hose holder.
Connecting Water Supply
Ensure the water tap is turned off before connecting.
- Section B, Step 4: Connect the high-pressure hose to the machine's water inlet.
- Section B, Step 5: Connect the spray gun to the high-pressure hose. The connection should click and lock ?. To unlock, press the release mechanism.
- Section B, Step 6: Attach the desired nozzle to the spray lance.
- Section C, Step 1: Connect the water supply hose to a water tap. The water source should be clean, with a minimum inlet size of 1/2 inch, and water temperature not exceeding 20°C. The hose should be placed within 0.5m of the water source. Ensure the connector is compatible (✔️) and not incompatible (❌).
- Section C, Steps 2-3: Connect the water supply hose to the machine's water inlet.
- Section D, Step 2.3: Connect the water supply hose to the tap.
- Section E, Step 1: Connect the water supply hose to the tap (1.1) and then to the pressure washer (1.2).
- Section F, Step 3: Connect the water supply hose to the tap (3.1) and then to the machine.
Connecting Power and Initial Operation
- Section B, Step 7: Connect the unit to a power source.
- Section C, Step 4.2: Plug the power cord into a suitable electrical outlet.
- Section D, Step 2.2: Connect the power plug to the electrical outlet.
- Section E, Step 5.2: Connect the power plug to the electrical outlet.
- Section F, Step 1.2: Plug the power cord into a suitable electrical outlet.
- Section C, Step 5: Test the water flow and power. Run the machine for a maximum of 2 minutes to flush the system.
- Section C, Step 6: Connect the spray gun to the high-pressure hose and the power. Adjust the power control dial as needed.
- Section D, Step 2.1: Adjust the power control dial.
- Section E, Step 2.1: Operate the spray gun and adjust the power control.
- Section E, Step 4.2: Adjust the power setting using the dial.
- Section F, Step 1.1: Adjust the power control.
Using the Pressure Washer
- Section C, Step 7: Operate the pressure washer. Hold the spray gun firmly. Point the spray away from people and animals. Do not operate without water.
- Section C, Step 12: Nozzle Selection:
- Gentle Nozzle: Recommended Power 1-3
- Rough Nozzle: Recommended Power 3
- Patio Cleaner: Recommended Power 2-3
- Soft Brush: Recommended Power 3
- Section C, Step 13: Use the Power Control dial to adjust the pressure.
- Section C, Step 14: Operation safety: ⚠️ Warning. Do not operate with damaged cords or plugs. Do not operate in the rain. Do not point the spray at electrical equipment or the unit itself.
- Section E, Step 4.3: Adjust the power setting. The water spray indicates correct operation.
- Section F, Step 2: Use detergent for cleaning by attaching the detergent bottle.
Storage and Maintenance
- Section E, Step 7: Store the hose neatly on the unit.
- Section E, Step 8: ⚠️ Warning: Do not operate or store the unit in freezing temperatures (❄️). Protect from frost.
- Section F, Step 4: Disconnect the hose from the tap and dispose of it properly.