Instruction Manual for VISUAL COMFORT models including: TOB 1002, Bryant Floor Lamp

TOB1002 AI

Bryant Floor Lamp - Item # TOB1002 - Circa Lighting

Carefully remove all parts from the box. 2. Insert the harp (C) into the harp saddle (D). 3. Insert bulb (not included) into the socket.

Installation Guide

Bryant Floor Lamp

Install Sheet

Visual Comfort TOB1002AS-L Thomas O'Brien Bryant 44 inch 150.00 watt Antique Silver Floor Lamp Portable Light

• Google Docs
• Google Drive
• Download [pdf]
• Download Optimized



File Info : application/pdf, 1 Pages, 191.18KB

Document Document

ASSEMBLY INSTRUCTIONS
Bulb not included

A B (Packaged separately)
C D
E

G F

Bryant Floor Lamp Item # TOB 1002
NOTICE: This light fixture should be installed in accordance with all applicable, local installation codes, and by a person familiar with the construction and operation of it, as well as the hazards involved. Inspect item and contents carefully. If any damage or defect is found, do not install. Retain all packaging material until installation is complete and approved.
TOOLS REQUIRED (NOT INCLUDED): Scissors
1. Carefully remove all parts from the box. Place on a clean, soft surface. 2. Install harp (C) by squeezing together and inserting into top of
saddle (D). 3. Remove finial (A) from harp (C). 4. Remove shade (B) from packaging and install to harp (C) using
finial (A). NOTE: If shade has additional packaging, carefully cut off from interior of shade to avoid damages. 5. Install light bulb into the socket. 6. To adjust fixture height loosen adjustment knob (E), pull up or down to desired position then tighten. NOTE: Help guide cord in or out of base for easier adjusting. 7. Remove protective cover (G) from plug (F). 8. Plug into electrical outlet and test fixture.
Care Instructions: Clean only with a soft dry cloth or feather duster. Do not use abrasive or chemical agents.