Imou Cell 2 Quick Start Guide

1. Download the Imou Life App

Option 1: Search "Imoulife" App from the App Store or Google Play.

Option 2: Scan the QR code to install the Imou Life App.

System Requirements:

• For iOS, the system version should be 9.0 or above.
• For Android, the system version should be 5.0 or above.

2. Create an ImouLife account

1. Click "Sign Up".
2. Select your region.
3. Enter your email address and set a password.
4. Enter the verification code sent via email from Imou.

Note: Email verification codes may be blocked by spam filters. Please check your trash box if you do not receive it.

3. Add the camera to your Imou account

Option 1: Scan the QR code located on the back of the camera.

Option 2: Add the camera manually by inputting the serial number.

Warm Notes:

• Place your smartphone and camera within 30 cm of the router.
• Keep your smartphone 10-15 cm from the camera when scanning the QR code.

The camera label typically includes the model number (e.g., IPC-848LP), power requirements (e.g., 5V 2A), and a QR code for setup.

4. Remove the cover and insert the battery

1. Twist to remove the cover from the bottom of the camera.
2. Ensure the arrow on the battery faces up. Insert the battery into the correct slot; you should hear a click sound.

5. Power on the camera

1. Press the reset button for 2-3 seconds until the LED turns green.
2. Wait for the LED to flash green, then tap "Next".
3. Align the cover to the entrance.
4. Push and twist the cover into the lock position.

If the light is not flashing green, consult the troubleshooting section or contact support.

6. Connect to the device DAP hotspot

1. Connect your mobile phone to the device's DAP hotspot.
2. Once connected, select your home Wi-Fi network on the next screen.

Troubleshooting DAP hotspot connection: If you cannot connect, go to your mobile phone's WLAN settings and manually connect to the device's DAP hotspot. The password is an 8-digit safety code found on the back of the camera. After connecting, return to the app.

Note: The DAP hotspot does not provide internet access; it is solely for device configuration.

Available Wi-Fi networks will be listed, including options like "IMOU-TEST 110414", "TEST-110414_Wi-Fi5", and others.

7. Connect to Imou cloud server

1. Enter your home Wi-Fi password correctly and tap "Next". The camera will automatically connect to the Imou cloud server.
2. The device will show as connecting to the cloud and then adding to your account.
3. Once the device is added successfully, you can name your device (e.g., "Cell 2-F713").
4. Configure settings such as location (Front Door, Backyard, Garage, Kitchen, Living Room, Basement), Time Zone, and DST.

For security, it is recommended to change the device's default password.

Thank You

If you encounter connection failures, please reach out to service.vip@imoulife.com.