VEVOR Room Dividers
Instruction Manual
TOUGH TOOLS, HALF PRICE
For Technical Support and E-Warranty Certificate, visit: www.vevor.com/support
Product Overview
Models: LX803-1BL, LX803-1GR, LX803-1BG
This manual provides instructions for assembling and using VEVOR Room Dividers. Please read all instructions carefully before operation.
Contact Us: For product questions or technical support, please contact: CustomerService@vevor.com
Disclaimer: VEVOR reserves the right to interpret this user manual. Product appearance is subject to the item received. VEVOR will not provide further notice for technology or software updates.
Product Parameters
| Model | LX803-1BL, LX803-1GR, LX803-1BG |
|---|---|
| Screen Number | 3 |
| Fabric Material | Polyester, 180g/m² |
| Product Size | 2260*515*1850mm |
| Net Weight (N.W) | 6.8kg |
Safety Precautions
WARNING: Read this material before using this product. Failure to do so can result in serious injury. SAVE THIS MANUAL.
Assembly Precautions
- Assemble according to these instructions. Incorrect assembly can be a hazard.
- Wear safety goggles and heavy-duty work gloves during assembly.
- Do not assemble when tired or under the influence of alcohol, drugs, or medication.
- Weight capacity and product capabilities apply only to a properly and completely assembled product.
- Keep the assembly area clean and well-lit.
- Keep bystanders out of the assembly area.
- Assemble on a flat, level, hard, and smooth surface capable of safely supporting the product.
Use Precautions (To Prevent Serious Injury and Death from Tipping)
- This product is not a toy. Do not allow children to play with or approach this item.
- Use as intended only. Do not sit or stand on the product.
- Inspect before every use. Do not use if parts are loose or damaged.
- Use on flat, level, and hard surfaces only.
- Do not exceed the listed weight capacity. Tighten all knobs securely before applying load. Be aware of dynamic loading, as sudden load movement may briefly create an excess load, causing product failure.
Parts List
- A1: Pole section (4PCS)
- A1-1: Pole section (2PCS)
- A2: Pole section (6PCS)
- B: Horizontal support bar (6PCS)
- C: Base support (6PCS)
- D: Connector piece for joining panels (6PCS)
- E: Screw/Bolt for securing panels (6PCS)
- F: Screw/Bolt for frame assembly (12PCS)
- G: Screw/Bolt for frame assembly (12PCS)
- H: Fabric panel (3PCS)
- I: Small connector/cap for base (6PCS)
- J: Small connector/cap for base (6PCS)
- K: Assembly Tool (1PC)
Assembly Steps
(TIPS: Before use, it is recommended to iron curtains to reduce creases)
STEP 1
Assemble the vertical pole sections. Combine pole sections A1, A1-1, and A2 to form the main vertical supports.
[Diagram shows pole sections A1, A1-1, A2 being joined together.]
STEP 2
Attach a horizontal support bar (B) to a vertical pole section (A). Use screws F (x2) and G (x2) to secure the connection. A close-up view shows screws F and G being inserted through holes in B and into A.
[Diagram shows a vertical pole A, a horizontal bar B, and screws F and G being used for attachment. A magnified view shows the screw insertion.]
STEP 3
Slide a fabric panel (H) onto the assembled frame structure (A and B). The arrow indicates the direction of sliding.
[Diagram shows a vertical pole A and horizontal bar B forming a frame, with fabric panel H being slid onto it.]
STEP 4
Attach another horizontal support bar (B) to the other side of the vertical pole section (A). Secure with screws F (x2) and G (x2). A close-up view shows the screw insertion.
[Diagram shows the frame with fabric panel H, and another horizontal bar B being attached to the vertical pole A using screws F and G.]
STEP 5
Connect multiple assembled panel units. Use connector pieces (D) to join the vertical poles of adjacent panels. Attach base supports (C) to the bottom of the vertical poles. Use screws (E x6) and small connectors/caps (I x6, J x6) to secure the bases. Tool K is used for tightening.
[Diagram shows three assembled panel units connected by D pieces. Base supports C are attached to the bottom of the poles, secured by E, I, and J. A close-up shows these connections.]
COMPLETION
The room divider is now fully assembled and ready for use.
[Diagram shows the completed three-panel room divider standing upright.]
Company Information
Importers:
- WAITCHX, Address: 250 bis boulevard Saint-Germain 75007 Paris
- FREE MOOD LTD, Address: 2 Holywell Lane, London, England, EC2A 3ET
Representatives:
- EC REP: EUREP GmbH, Address: Unterlettenweg 1a, 85051 Ingolstadt, Germany
- UK REP: EUREP UK LTD, Address: UNIT 2264, 100 OCK STREET, ABINGDON, OXFORDSHIRE ENGLAND OX14 5DH
Manufacturers: Linhai lixin leisure products co., ltd.
Address: Datian street, Linhai City, Zhejiang Province
Made in: China
Contact Us â Official VEVOR Support
