Datasheet for avalue Technology models including: AGE215, AGE215 Features Onboard Intel Elkhart Lake Processor System, Features Onboard Intel Elkhart Lake Processor System, Onboard Intel Elkhart Lake Processor System, Elkhart Lake Processor System, Lake Processor System, Processor System, System
AVALUE TECHNOLOGY INCORPORATION AGE215 System Features Onboard Intel Elkhart Lake Processor XBG-AGE215 XBGAGE215 age215
System Features Onboard Intel Elkhart Lake Processor
AGE215
User Manual
1
Title
System Features
AGE215
Onboard Intel® Elkhart Lake Processor / Intel Atom® x6211E Processor 1 x 260-pin DDR4 4GB M.2 64GB SSDWide Temp: - 40 to +85C
4 x USB 2 x COM, PORT RS232 2 x LAN PORT(RJ45) DC Power Input from 12~ 24v in 3mm glass with logo two color - black in frame and black 7C light for logo print 21.5" 1920 x 1080 ,P CAP Touch + LED Driving board 60W Power adapter & Power cord Wall mount Screws & nuts Individual box Window 10 IOT (64bit) (Avalue don't need install it in the system ) Support TPM 2.0
Customer 1. Stainless (hair-line surface treatment) keep appearance the original
size 2. Radar board include sensor function (Avalue don't need install it in the
system ) 3. RFID (Avalue don't need install it in the system )
Description Description Description Description
Intended Use of the Product (Please specify in detail as much as possible the application use for the end users that this product will be applied to if this is a Medical product) Non-medical models
Product Environmental Standards
The project member must make sure all the components that are adopted to this product complies with the environmental law and regulation of the EU in accordance with the "Product Environmental Protection Management Procedure (QQ2-019)" requirement. Non-medical models
Working Principles & Functionality of the Product (Please specify the working principles or functionality of this product in detail as much as possible if this is a Medical product) Non-medical models
Risk Management (Please specify the result of the Risk Management evaluation performed by the project initiator, ex. customer, in detail as much as possible if this is medical product) Non-medical models
2
Mother Board CPU
CPU Cooler (Type) Memory Power Supply Adapter System Fan Microphone Speaker Camera Wireless LAN Bluetooth Operating System
Expansion Card Other Component
Radar board
RFID
Floppy Disk Drive Hard Disk Drive Optical Disk Drive Solid State Drive Other Storage Device
LCD Panel LCD Control Board B/L Inverter/Converter Touch Screen Touch Controller Others
PS/2 KB & Mouse Serial Port
Specifications
ARC-EHL
Component
Onboard Intel® Elkhart Lake Processor Intel Atom® x6211E Processor By mechanical design Heatsink
1 x 260-pin DDR4 4GB
DC Power 12~ 24v in
60W, 12V power adaptor + power cord
N/A
N/A 1 Speaker
N/A
N/A
N/A
Window 10 IOT (64bit) (Avalue don't need install it in the system )
N/A
TPM 2.0 (NuvoTon_NPCT754AADYX / Infineon_SLB9670VQ2.0 co-lay) Default is NuvoTon by Option for customer request
Radar board include sensor function / I2C (Use SMBUS is pulled out to define as I2C) (Avalue don't need install it in the system) RFID (Avalue don't need install it in the system )
Storage
N/A
N/A
N/A
N/A
M.2 64GB SSD Wide Temp: - 40 to +85C
Panel 21.5" BOE LCD:E9689421502R N/A E968X000244R
21.5" Touch screen -3mm (Customized)
EETI By Touch screen is attached
1.21.5" LED Driving board 2.Bonding Panel: 21.5" BOE LCD:E9689421502R + Touch screen
External I/O N/A
1 x DB-9 COM1 (RS-232/422/485, selectable by BIOS & JUPMER, RS-485 supports Auto Flow, Pin-9 selected for Ring/+5V/+12V by Jumper) 1 x DB-9 COM2 (RS-232, Pin-9 selected for Ring/+5V/+12V by
3
Confirm
Jumper)
Parallel Port
N/A
USB Port
4 x USB3.2 Gen2x1 (10Gbp/s) (2 x Dual Deck, Type A)
1394 Port
N/A
PCMCIA Port
N/A
DIO Port
N/A
LAN Port
2 x Intel® I225-IT 2.5 Gigabit Ethernet (RJ45)I22C-IT#1
Blocked
Wireless LAN
N/A
Antenna
Switch
N/A
Indicator Light
HDD LED, Power LED (Green for Power, Yellow for HDD)
Expansion Slots
N/A
Others
ARC-EHL board Remove PenMount6000, LAN I225-1
(Not using this function)
Mechanical
Power Type
12V~24V wide voltage DC input
Power Connector
1 x DC-J 3P 90D(M) 2.5mm
Type
Dimension
537 x 390 x45mm
Weight
TBD
Color
Stainless (hair-line surface treatment)
Fanless
Yes
OS Support
Window 10 IOT (64bit)
(Avalue don't need install it in the system )
Software Specification
Description
N/A
Reliability
Dust and Rain Test TBC
Vibration Test
Random Vibration Operation
1. PSD: 0.00454G²/Hz , 1.5 Grms
2. operation mode
3. Test Frequency : 5-500Hz
4. Test Axis : X,Y and Z axis
5. 30 minutes per each axis
6. IEC 60068-2-64 Test:Fh
7. Storage : CF or SSD
Random vibration test (Non-operation)
1 Test Acceleration : 2G
2 Test frequency : 5~500 Hz
3 Sweep1 Oct/ per one minute. (logarithmic)
4 Test Axis : X,Y and Z axis
5 Test time :10 min. each axis
6 System condition : Non-Operating mode
7. Reference IEC 60068-2-6 Testing procedures
Mechanical Shock 10Grms, IEC 60068-2-27, Half Sine, 11ms
4
Test Package Drop Test
Operating Temperature Operating Humidity Storage Temperature Other Test Package vibration test
Bump Test
Verification Standards
CE 2014/30/EU EMC EN55032+55035 2017/745/ EU CE EN60601-1-2 Others
Verification Standards
FCC part 15B Federal Communication Commission ICES-003 (Canada EMI requirement) UKCA (United Kingdom EMI requirement) VCCI (Japan EMI
Package drop test
1 One corner , three edges, six faces
2 ISTA 2A, IEC-60068-2-32 Test:Ed
0°C ~ 40°C
0%~90% relative humidity, non-condensing
-20°C ~ 60°C
N/A
1. PSD:0.026G2/Hz, 2.16 Grms
2. Non-operation mode
3. Test Frequency: 5-500Hz
4. Test Axis: X,Y and Z axis
5. 30 min. per each axis
6. IEC 60068-2-64 Test: Fh
1. Wave form: Half Sine wave
2. Acceleration Rate: 10 g for operation mode
3. Duration Time: 11ms
4. No. of Shock: Z axis 300 times
5. Test Axis: Z axis
6. Operation mode
7. Reference IEC 60068-2-29 Testing procedures Test Eb:
Bump Test
EMC Certification (EMI+EMS)
PCB
Options
CE/FCC Logo Remarks: For projects that only do pre-scan test and Avalue does not assist in applying for certificates, CE/FCC Logo cannot be printed on PCB
Class A Class B CE N/A
() EU (ITE) () EU (Medical)
EMI Certification
Options
PCB
CE/FCC Logo Remarks: For projects that only do pre-scan test and Avalue does not assist in applying for certificates, CE/FCC Logo cannot be printed on PCB
Class A () Class B US region (ITE)
,Based on FCC Canada Region
Without WiFi
() UK Region (ITE)
() Japan Region
5
requirement)) Others
Verification Standards
EN 300 330 WIFI (for FCC ID) FCC part 15C Others
Verification Standards
2014/35/EU LVD EN 62368-1 Low Voltage Directive
(EU)2017/745 MDR EN 60601-1
UL() UL/cUL-62368-1 UL() UL/cUL-60601-1 Others
(Only members can submit
application)
N/A
RF () Certification
PCB
Options
CE/FCC Logo Remarks: For projects that only do pre-scan test and Avalue does not assist in applying for certificates, CE/FCC Logo cannot be printed on PCB
CE
EU
FCC N/A
US region
Safety Certification
Options
PCB
CE/FCC Logo Remarks: For projects that only do pre-scan test and Avalue does not assist in applying for certificates, CE/FCC Logo cannot be printed on PCB
CE
() EU, Safety (ITE)
EN 62368-1
CE
UL UL N/A
()
EU (Medical) Safety Risk assessment report required
ITE
Medical, risk assessment report required
6
Class B: (Section 15.105) (, ) FEDERAL COMMUNICATIONS COMMISSION INTERFERENCE STATEMENT This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -Reorient or relocate the receiving antenna. -Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -Consult the dealer or an experienced radio/ TV technician for help. (Section 15.21) CAUTION: Any changes or modifications not expressly approved by the grantee of this device could void the user's authority to operate the equipment.
( Section 15.19)(a)(3)
1. (EUT 8*10cm ) , 2. DoC,
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
RF Exposure RF exposure warning This equipment must be installed and operated in accordance with provided instructions and the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provide with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.
7
Board Block Diagram 8
Operation Manual Step1: 1.The lower right adapter on the back of the machine powers the Panel PC via the power cord. 2.The USB of the intermediate RFID is inserted into the USB port.
9
Step2: The Panel PC boots successfully.
Step3: Power off: Click the bottom left corner of the screen to select Power Off
10
適用於 Microsoft 365 的 Microsoft Word