Kassa Installation Manual

1 Mark Mounting Positions

Mark the positions of the two screw holes on the wall where you want to install the mirror according to the dimensions provided in the sketch below. (Thai: กำหนดตำแหน่งที่จะเจาะรูบนกำแพงในบริเวณที่ต้องการติดตั้ง)

Diagram shows a wall with horizontal and vertical lines indicating measurement points, with 'X mm' noted as a dimension.

2 Drill Holes

Drill holes at the previously marked positions. Ensure the diameter and depth of the holes are the same as that of the screws provided. (Thai: เจาะรูที่กำแพงตามจุดที่กำหนดไว้ โดยขนาดของรูให้เทียบกับสกรูที่ให้ไปในชุด)

Diagram illustrates drilling into a wall, with a screw and wall plug shown for scale, and horizontal/vertical lines marked with 'X mm'.

3 Insert Wall Plugs

Insert the wall plugs into the drilled holes. (Thai: เสียบพุกเข้าไปในรูที่เจาะไว้)

Diagram shows wall plugs being inserted into drilled holes in a wall, with horizontal/vertical lines marked with 'X mm'.

4 Install Screws

Spin the bent-head screws into the drilling holes on the wall in a clockwise direction. Use a Phillips head screwdriver. (Thai: ขันสกรูตามเข็มนาฬิกา โดยใช้หัวสกรูแบบปากแฉก)

Diagram depicts a bent-head screw being screwed into a wall plug using a screwdriver, with horizontal/vertical lines marked with 'X mm'.

5 Mount the Mirror Cabinet

Place the mirror cabinet on the wall, aligning it with the installed screws. (Thai: วางสินค้าตามจุดที่ติดตั้งไว้แล้ว)

Diagram illustrates the mirror cabinet being positioned and mounted onto the wall using the screws.

Installation Tools (Not Provided)

The following tools are required for installation but are not included:

• ? Electric Drill(สว่านไฟฟ้า)
• ? Level(ไม้บรรทัดระดับน้ำ)
• ? Hammer(ค้อน)
• ✏️ Pencil(ดินสอ)
• ? Tape Measure (2m)(ตลับเมตร)