Universal Gaming Steering Wheel and Pedals

Product Overview

Thank you for purchasing the Universal Gaming Steering Wheel and Pedals. This manual provides instructions for setup, features, programming, and safety precautions.

The steering wheel is compatible with PS4, XBOX ONE, PC, and PS3, and works with all racing games on these platforms. An official controller is required for PS4 and XBOX ONE use. It features 180-degree steering rotation, adjustable sensitivity, 6 programmable buttons, analog driving control, spring-loaded pedals, and a stable USB connection.

Features

• Compatibility: PS4, XBOX ONE, PC & PS3
• Game Compatibility: All racing games on supported platforms
• PS4/XBOX ONE Requirement: Official controller required
• PC Compatibility: X-Input and Direct Input
• Steering Rotation: 180 degrees
• Sensitivity Control: 3 positions
• Programmable Buttons: 6 buttons for custom configurations
• Driving Control: Fully analog
• Pedals: Spring-loaded acceleration and brake
• Connection: USB
• Pedal Cable: Secure connector design
• Stabilization: Strong suction cups

Installation

Setup on PS4

1. Ensure the PS4 is turned off.
2. Plug the steering wheel's USB cable into a console USB port.
3. Connect the pedals to the steering wheel.
4. Turn on the console.
5. Plug an official PS4 controller (turned off) into the USB port on the wheel using the provided cable.
6. Press the HOME button on the wheel; the red LED should be lit.
7. The steering wheel is now ready.

Setup on XBOX ONE

1. Ensure the XBOX ONE is turned off.
2. Plug the steering wheel's USB cable into a console USB port.
3. Connect the pedals to the steering wheel.
4. Turn on the console.
5. Plug an official XBOX ONE controller (turned off) into the USB port on the wheel using the provided cable.
6. Press the HOME button on the wheel; the red LED should be lit.
7. The steering wheel is now ready.

Setup on PC

1. Turn on the PC.
2. Connect the pedals to the steering wheel.
3. Connect the steering wheel's USB cable to a PC USB port. A Windows utility will automatically install the device.
4. Once installation is complete, LED 1 will remain on, indicating the wheel is ready.

Mode Switching (PC): The steering wheel defaults to X-Input. To switch to Direct Input mode, press and hold the Home/Mode button for 3 seconds. The LED will flash to confirm the change. This mode will be used by default. You can switch between modes anytime by holding the Home/Mode button for 3 seconds.

Setup on PS3

1. Ensure the PS3 is turned off.
2. Plug the steering wheel's USB cable into a console USB port.
3. Connect the pedals to the steering wheel.
4. Turn on the console.
5. Press the HOME button on the wheel to activate the connection.
6. The player indicator LED in the center of the wheel will stay lit.

Programming Function

You can customize button configurations for different games. Two methods are available:

1. In-Game Configuration: Access the Options/Controllers menu within the game to create and save custom configurations.
2. On-the-Go Programming: Program buttons directly on the steering wheel without accessing game menus. Note that these configurations are not saved after use.

Programmable Buttons: Left pedal, Right pedal, Left paddle shifter, Right paddle shifter, L3, R3.

Programming Procedure

1. Press and hold the OPTIONS and SHARE buttons simultaneously for 3 seconds. The LED will turn green.
2. Press one of the 6 programmable buttons to set a new function. The LED will flash green.
3. Press the button you want to assign to the programmable button. The LED will turn off, indicating the key is programmed.
4. Repeat for other buttons as needed.

Reset One Programmed Key

1. Press and hold the OPTIONS and SHARE buttons simultaneously for 3 seconds. The LED will turn green.
2. Press the programmed key you wish to reset. The LED will flash green.
3. Press the same key again. The LED will turn off, resetting the key to its default function.

Reset All Programmed Keys

1. Press and hold the OPTIONS and SHARE buttons simultaneously for 3 seconds. The LED will turn green.
2. Press and hold the OPTIONS and SHARE buttons again for 4 seconds. The LED will turn off, resetting all keys to their default functions.
3. Alternatively, unplugging the wheel will also reset all configurations.

Sensitivity Adjustment

Adjust steering sensitivity for different racing game environments. Press OPTIONS & SHARE simultaneously for 3 seconds until the LED turns green. Release the keys. Press SHARE again to reset the current sensitivity. Press SHARE multiple times to cycle through sensitivity options, indicated by LED flashes:

• Medium Sensitivity: LED flashes green regularly. Suitable for quick turns.
• High Sensitivity: LED flashes green quickly. Suitable for very quick turns and cornering.
• Low Sensitivity: LED flashes green slowly. Normal steering angle.

Precautions

• Use the product only for its intended purpose.
• Avoid use in humid conditions, near liquids, or where the product may be splashed. Store in a dry place after use.
• Do not attempt to disassemble or repair the product yourself.
• Avoid applying excessive pressure to the device.
• Discontinue use if you experience fatigue, discomfort, or pain in your hands or arms. Consult a doctor if symptoms persist.
• Take breaks every 30 minutes.
• Keep the product away from direct sunlight, excessive heat, fire, or extreme cold, as temperature extremes can damage the device.
• Supervise children when they use the product. Keep cords away from children. The product contains small parts that may be a choking hazard. Not intended for children under 3 years of age.

Contact and Customer Support

For more information about the Universal Gaming Steering Wheel and Pedals or other Numskull peripherals, please contact:

Email: hello@numskull.com

Tel: +44 1707 800881

Environmental Responsibility

Please do not dispose of electronic devices with household waste. Take them to a recycling collection center to protect the environment.

Australia & New Zealand Technical and Warranty Support

This product comes with guarantees that cannot be excluded under the Australian Consumer Law and New Zealand Consumer Guarantees Act. You are entitled to a replacement or refund for a major failure and compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if they fail to be of acceptable quality and the failure does not amount to a major failure.

The product includes a one-year (12 months) warranty from the date of purchase for Australia and New Zealand. Defects must appear within one year of purchase to claim warranty. All warranty claims must be facilitated through the retailer of purchase, in accordance with their returns policy.

Customers are responsible for any expenses incurred in returning the product to the retailer.

AUSTRALIA

Bluemouth Interactive
Level 2, 2 Darling Street
South Yarra VIC 3141
Phone: (03) 98672666
Email: Support@bluemouth.com.au
Visit: www.bluemouth.com.au

NEW ZEALAND

Fiveight Distribution Ltd
Unit B, 39 Westpoint Drive
Hobsonville, Auckland 0618, New Zealand
Phone: (64) 94791530
Email: info@fiveight.co.nz
Visit: http://www.fiveight.co.nz