SYMFONISK Wireless Charger Shelf

Assembly Instructions

Important Note: As wall materials vary, screws for fixing to the wall are not included. For advice on suitable screw systems, contact your local specialized dealer.

Step 1: Prepare the Bracket

The image shows a person using a spirit level to ensure a surface is horizontal before mounting.

Step 2: Assemble Components

The image depicts two scenarios: one where a person is unsure how to assemble parts, indicated by a question mark and a hammer, and another where the person is successfully assembling the parts and then consulting instructions from IKEA.

Parts Included:

4x Screws (Part numbers: 10081398, 10081379)
1x Allen Key (Part number: 100006)

Step 3: Connect Power Cable

The image shows the power cable being connected to the bracket. Close-up views illustrate how to secure the cable.

Step 4: Mount the Shelf

The image shows the main bracket being mounted to the wall using screws. A close-up shows how to insert the screws. The wireless charging unit is then shown being slid into place on the bracket. Another close-up shows the power connection for the wireless charging unit.

Step 5: Secure the Wireless Charging Unit

The image shows the wireless charging unit being secured to the bracket using screws and the provided Allen key. The part numbers for the screws and Allen key are visible.

Step 6: Charging Devices

Wireless Charging:

Place the device to be charged on top of the plus sign (+) on the charger. The device must be placed directly over the plus sign (+) for optimal charging.
If the battery is completely discharged, it may take a few minutes before charging begins.

USB Charging:

Insert the USB cable into the free slot and connect the other end to the device you want to charge.
Use only a recommended USB cable for your device and replace faulty cables immediately.

Wireless Charging LED Indicator:

Power on: LED lights up for 3 seconds.
Charging: LED is on.
Charging completed: LED is off.
Error: LED flashes.

The image shows a device being placed on the wireless charging pad and a phone being charged via USB. It also shows a warning against charging incompatible devices.

Step 7: Final Connections

The image shows a phone connected via USB cable to the SYMFONISK shelf. The maximum recommended USB cable length is 3 meters (10 feet).

Technical Specifications

AC Input: 100-240V AC, 50/60Hz, 1.0A

USB-C Output: 5.0V DC/3.0A 15.0W, 9.0V DC/2.0A 18.0W, 12.0V DC/1.5A 18.0W, 15.0V DC/1.2A 18.0W

Qi Wireless Charging:

Operating frequency: 110 - 148 kHz
Output power: 0 dBµA /m at 10m

General:

Model: SYMFONISK charging shelf
Type: E2122
Indoor use only
Maximum load on shelf: 3 kg

Charger Features

Charges 1 wireless and 1 USB-connected device simultaneously.
USB-C outlet compatible with Power Delivery 3.0 standard (quick-charging).
Wirelessly charges Qi-certified devices.
Certified according to specification Qi 1.2.4 BPP.
Temperature and power monitor for safety.
LED status indicator for wireless charging.

Good to Know

Devices may get warm during charging. This is normal and they will cool down after being fully charged.
Charging time varies based on device battery capacity, charge level, battery age, and ambient temperature.
Charger operating temperature: 0°C to 40°C (32°F to 104°F).
USB cable length and quality affect charging speed and performance.
Unplug the charger before cleaning and when not in use.
Clean the charger with a moist cloth. Never submerge the charger in water.

Safety Warnings

The wall socket must be located near the equipment and easily accessible.
Only use in dry locations.
Children should be supervised to ensure they do not play with the product.
Do not expose devices to wet, moist, or excessively dusty environments as this can cause damage.
If the device is damaged, it should be disposed of.
Never use a damaged or faulty USB cable for charging, as this can damage the product and connected devices.
Only wirelessly charge Qi-certified devices.

Product Servicing

Do not attempt to repair this product yourself. Opening or removing parts may expose you to dangerous voltage points or other risks.

RF Exposure Information

According to RF exposure regulations, under normal operations, the end user shall refrain from being closer than 20 cm from the device.

Regulatory Compliance

This device complies with Part 15 of the FCC Rules. It contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada's licence-exempt RSS standard(s). Operation is subject to two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

WARNING: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment causes harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by reorienting or relocating the receiving antenna, increasing the separation between the equipment and receiver, connecting the equipment into an outlet on a circuit different from that to which the receiver is connected, or consulting a dealer or an experienced radio/TV technician.

Disposal Information

The crossed-out wheeled bin symbol indicates that the product should be disposed of separately from household waste. It should be handed in for recycling in accordance with local environmental regulations. By separating marked products, you help reduce the volume of waste sent to incinerators or land-fill and minimize negative impact on human health and the environment. For more information, please contact your IKEA store.

Manufacturer Information

Manufacturer: IKEA of Sweden AB

Address: Box 702, SE-343 81 Älmhult, SWEDEN

The 'Qi' symbol is a trademark of the Wireless Power Consortium.

	NYMÅNE Wireless Charger - IKEA Product Manual Comprehensive guide for the IKEA NYMÅNE wireless charger, covering features, setup instructions, technical specifications, safety warnings, and disposal information.
	NYMÅNE Wireless Charging Guide Instructions and technical specifications for the IKEA NYMÅNE wireless charger, including safety information and charging guidelines.
	IKEA SJÖSS 45W USB-C Charger: Features, Specifications, and Usage Guide Detailed information about the IKEA SJÖSS 45W USB-C charger, including product features, technical specifications, usage instructions, safety warnings, and compatibility with PD 3.0, QC 4+, and PPS technologies.
	SJÖSS 30W USB Charger - Fast Charging and Safety Features Discover the IKEA SJÖSS 30W USB charger. This guide details its fast charging capabilities (PD 3.0, QC 4+, PPS), compatibility with phones, tablets, and laptops, built-in safety features, and usage instructions. Learn about its technical specifications and proper care.
	IKEA LIVBOJ Wireless Charger - User Manual and Specifications User manual and technical specifications for the IKEA LIVBOJ wireless charger (Model E1815). Learn about its features, usage, safety warnings, and technical data for Qi-compatible charging. Includes multilingual support.
	IKEA LIVBOJ Wireless Charger User Guide and Instructions Comprehensive guide for the IKEA LIVBOJ wireless charger, detailing features, setup, usage, safety warnings, and technical specifications for optimal performance.
	IKEA LIVBOJ Wireless Charger: User Guide, Features, and Safety Detailed instructions and specifications for the IKEA LIVBOJ wireless charger. Learn about its features, how to use it, LED indicators, safety precautions, technical data, and proper disposal.
	IKEA NYMÅNE Wireless Charger User Guide User guide for the IKEA NYMÅNE wireless charger, detailing features, usage instructions, safety warnings, and technical specifications for Qi-compatible devices.