FÖRBÄTTRA Decorative Plinth
This document provides assembly instructions for the IKEA FÖRBÄTTRA decorative plinth.
Parts and Tools
Components:
- 8x Component 110126
- 36x Screw 109535
- 4x Bracket 101827
- 4x Bracket 123026
- 4x Bracket 118411
- 4x Bracket 139205
- 2x Bracket 139206
Tools Required (indicated in diagrams):
- Screwdriver
- Saw
- Mitre box
Page 2 shows the required tools and components. It also illustrates correct and incorrect methods for cutting materials, and a general indication of assembly or seeking assistance.
Page 3 lists additional components.
Page 8 contains a multilingual note stating: "NOTE! Silicone is not included."
Assembly Steps
Step 1: Preparing Plinth Sections
Pages 4 & 5: Diagrams show joining plinth pieces at 90-degree angles. Measurements like "X cm + 25 mm (X/X\" + 1")" and "X cm (X/X")" are indicated, suggesting placement relative to cabinet edges.
Page 6: Diagrams illustrate cutting angles of 67.5°, 45°, and 90°, indicating how plinth pieces may need to be angled for corners or specific configurations.
Page 9: Shows joining two plinth sections using tape and preparing for bracket attachment, with a measurement of "30 mm (1 3/16")" indicated.
Step 2: Attaching Brackets to Plinth
Page 7: Illustrates attaching L-shaped brackets (118411) to plinth pieces using screws (109535).
Page 10: Shows attaching bracket 101827 to a plinth piece using two screws (109535).
Page 11: Shows attaching bracket 101827 to another plinth piece using two screws (109535).
Step 3: Attaching Brackets to Cabinets
Page 12: Shows attaching brackets 139205 (4x) to the base of kitchen cabinets using screws (109535). A measurement of "40 mm (1 9/16")" is indicated.
Step 4: Assembling and Installing Plinth
Page 13: Shows attaching components 123026 (4x) and 110126 to the plinth assembly. Step 7 shows the assembled plinth being slid into place against the cabinets, indicated by arrows.
Page 14: Step 8 shows pushing the plinth into place against the cabinet base. Step 9 shows securing the plinth, possibly with tape initially, then attaching a bracket.
Page 15: Step 10 shows attaching brackets (likely 139206, 2x) to the plinth using screws (109535). Another bracket is attached to the cabinet base, with a measurement of "80 mm (3 2/16")" indicated.
Page 16: Steps 11 and 12 show joining and sliding plinth sections together.
Page 17: Step 13 shows attaching brackets to the plinth assembly using dowels/connectors (4x). A separate diagram shows attaching a side panel to a cabinet using screws, which may be part of the overall kitchen unit assembly.
Page 18: Step 14 shows the assembled plinth being slid into place against the base of multiple cabinets.
Page 19: Step 15 shows attaching brackets (2x) to the plinth using screws (109535) and attaching another bracket (4x) to the plinth using screws (109535).
Page 20: Shows attaching a side panel to the cabinet structure using screws, likely completing the cabinet unit.
