Corsair 2000D Airflow ITX Tower Case

Case Specifications

*GPU dependent

Diagram Description: Front and rear views of the PC case with dimensions labeled: 200mm width, 450mm height, 271mm depth. The rear view shows internal components like motherboard mounting points, PSU bay, and expansion slots.

Accessory Kit Contents

• 12x Fan screws (short) [?]
• 8x MBD / HDD screws [?]
• 8x SSD screws [?]
• 1x Motherboard standoffs [⚙️]
• 5x Cable ties [?]

Case Features

The case features several key components:

• A: Mesh Panels - These are the front, top, and side panels, designed for airflow.
• B: Side Fan Bracket - A bracket for mounting fans on the side.
• C: Rear Dust Filter - A removable filter located at the rear of the case.
• D: 1x AF120S Fan - An included 120mm slim fan.
• E: 1x Removable SSD Trays - Trays for mounting SSDs.
• F: Removable PSU Shroud - A shroud for the power supply unit, which can be removed.

Diagram Description: An exploded view of the case showing the placement of mesh panels (A), side fan bracket (B), rear dust filter (C), an included fan (D), removable SSD trays (E), and the removable PSU shroud (F).

Installation Guide

Front, Top & Side Panels Are Removable

Diagram Description: Illustrations show that the front, top, and side panels of the Corsair 2000D Airflow case can be detached from the main chassis for easier access during building.

Removing Side Panels

Diagram Description: Step-by-step visuals demonstrate the process of detaching the side panels from the case chassis.

Removing & Installing Fan / Rad Bracket

Diagram Description: The diagrams illustrate the three main steps (#1, #2, #3) involved in removing and then installing the fan or radiator mounting bracket within the case.

Installing Motherboard (ITX Only)

Diagram Description: A visual guide shows the installation of a Mini-ITX motherboard into the case, indicating the location of the I/O Area.

Removing PSU Shroud (SFX & SFX-L Only)

Diagram Description: The diagrams illustrate the process of removing the PSU shroud, specifically for users installing SFX and SFX-L form factor power supplies.

Optional Removal of PSU Shroud (SFX & SFX-L Only)

Diagram Description: Further visuals depict the optional removal of the PSU shroud, showing the case with and without the shroud.

Installing PSU (SFX & SFX-L Only)

Diagram Description: Step-by-step illustrations guide the user through the process of installing a power supply unit (PSU) of SFX or SFX-L size into the case.

Installing SSD

Diagram Description: Diagrams show the method for installing SSDs into the designated mounting locations within the PC case.

Installing Top Fan

Diagram Description: Visuals demonstrate how to install a fan into the top mounting position of the case.

Cable Routing Out of the Back

Diagram Description: An illustration shows how to route cables efficiently out of the rear of the case for clean cable management.

Front I/O Connections

The front panel of the case provides the following connections:

• USB 3.1 Type-C
• USB 3.0
• HD AUDIO
• POWER SW (Power Switch)
• POWER LED - (Power LED Negative)
• RESET SW (Reset Switch)
• POWER LED + (Power LED Positive)

Diagram Description: A diagram displays the various front panel connectors, including USB Type-C, USB 3.0, HD Audio, and headers for power and reset switches and LEDs.

FAQ

1. Does the polarity matter with the I/O panel's power and reset header?
   No, only the LED headers.
2. Who should I contact if I received my case damaged or one of the fans is no longer working?
   Please go to support.corsair.com and request an RMA so that Corsair can replace the damaged part(s).
3. Where can I mount a fan?

   Fan mount locations

   Location	Compatibility
   Front	3x 120mm
   Top	1x 120mm slim fan
   Rear	2x 120mm (GPU dependent)
   Side	3x 120mm / 2x 140mm

To learn more about this case, visit the product page at corsair.com.