Mooka Air Purifier

Points for Attention

Before using, please read this user manual carefully and keep it for future reference.

WARNING:

1. To avoid electric shock and fire, do not allow water, liquid or any flammable detergent to get into or to clean the product.
2. Do not spray insecticide, perfume or other flammable spray around the products.
3. Before connecting the power supply, please check whether the voltage of the product is consistent with the local power supply voltage.
4. This product can not replace normal ventilation, daily dust collection or oil pumping when cooking.
5. Ensure the product is used in condition of a stable and horizontal level.
6. Leave at least 30cm of space on the back and sides of the product, and at least 50cm of space above the product when using.
7. Ensure both the filter and its cover are properly installed before using.
8. Do not insert finger or other things into the air outlet/inlet to prevent physical damage or trouble.

Product Overview

Components:

• Air Outlet
• Control Panel
• Body
• Air Inlet
• Filter
• Base

Control Panel

The control panel features the following indicators and buttons:

• Power Button [Power Icon]: Touch to turn on/off the machine. The buzzer will ring once. When turned on, the power indicator and low-grade wind speed indicator light up green.
• Timer Button [Clock Icon]: In working condition, press to set the timer for 2H, 4H, or 8H. The corresponding indicator will light up. Press again to work continuously without a timer. The timer indicator turns off. When the timer is up, the fan stops and all lights turn off. This button cannot be operated when the machine is shut down.
• Wind Speed Button [Fan Icon]: In working condition, press to adjust the wind speed among Low, Middle, and High grades. The corresponding indicator will light up. This button cannot be operated when the machine is shut down.
• Reminder of Replacing Filter [Grid Icon]: When the air purifier reaches 2200 hours of operation, this indicator flashes red, signaling the need to replace the filter. After replacing the filter, press and hold the power button [Power Icon] for about 7 seconds to reset the alarm. Users do not need to reset when using the machine for the first time after installing the filter.

Notice: The machine will record the working modes when turned off without unplugging the power socket.

Specifications

Installation Filter

Unplug the power socket of the machine before replacing or installing the filter.

Steps:

1. Invert the machine and rotate the base along the direction marked "OPEN".
2. Take out the filter from the machine.
3. Remove the packaging of the filter.
4. Install the filter into the machine.
5. Install the base, rotate and tighten the base along the direction marked "CLOSE".

Filter Maintenance:

• Please remove the packaging of the filter before using for the first time.
• Ensure the machine is unplugged before removing or installing the filter.
• When the power indicator keeps flashing in red, the filter should be replaced.
• Please wipe the dust on the filter regularly; do not wash or use it repeatedly.
• Please use the filter specially designed for this product.

Function Instruction

When connected to the power socket, the buzzer will ring for 1 second.

Button Operation

Power Button

1. Touch the power button to turn on the machine. The buzzer will ring once, and the power indicator and the low-grade wind speed indicator light turn green.
2. Touch the button again to turn off the machine. The buzzer will ring once, and all lights turn off.

Timer Button

1. In the condition of working, press the timer button to set among the circulation of 2H, 4H, and 8H timer with buzzer rings, and the corresponding indicator will be on.
2. Press again, the timer indicator turns off, and the machine will work continuously without a timer.
3. In the status of timing, the machine begins to count down. When the time is up, the fan will stop working, and all lights will be off.

Wind Speed Button

1. In the condition of working, press the wind speed button. The buzzer will ring for one time.
2. Press again to adjust the wind speed among Low, Middle, and High grades with buzzer rings, and the corresponding indicator will be on.

Reminder of Replacing Filter

When the accumulated operation of the air purifier reaches 2200 hours, the indicator flashes red; the new filter is required to be replaced. After replacing the new filter, press and hold the power button [Power Icon] for about 7 seconds to reset the alarm.

Maintenance

Note

• Ensure the machine is unplugged before maintenance.
• Do not immerse the machine into water or any liquid.
• Do not use abrasive, corrosive, or flammable cleansers (such as bleach or alcohol) to clean any part of the unit.
• Do not use a vacuum cleaner to clean the filter or wash it directly.
• Please sterilize the filter under sunlight regularly.

Cleaning & Storage

1. Ensure the machine is power-off and unplugged.
2. Use a soft cloth with neutral cleanser to clean away any dust or debris from the surface of the unit and air inlet/outlet.
3. After the machine completely dries out, put it in its bag and place it in a cool and well-ventilated place.
4. If you do not use it for a long time, after the previous steps, please turn on the machine for a few minutes from time to time to ensure a good performance.

Notice: Please do not drop any water into the machine when cleaning the air outlet.

FAQ

Notice: If the above FAQ cannot solve your problems and need maintenance, please contact the supplier or after-sales service center. Please do not disassemble the machine to maintain it by yourself.

Warranty

Dear customer, thank you for your purchase. Our customer service team is standing by to assist you if you have any questions or concerns.

Every product purchased from Mooka comes with a 1-year warranty.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.