Instruction Manual for PHILIPS models including: DDNG-KNX, KNX Network Gateway, DDNG-KNX KNX Network Gateway

PDF Ddng-knx

Instructions d'installation Installationsanweisungen Instrucciones de instalación Istruzioni per l'installazione Installatie-instructies インストール手順 安装指示. Devices must be installed by a...

Philips Dynalite DH2X24 Din Rail Encloser

Integration Devices – Smart Led Lighting Controls

PDF preview unavailable. Download the PDF instead.

DDNG485-KNX-Installation-Insstruction
DDNG-KNX
KNX Network Gateway

Installation Instructions
Instructions d'installation Installationsanweisungen Instrucciones de instalación Istruzioni per l'installazione Installatie-instructies  

Devices must be installed by a qualified electrician in accordance with all national and local electrical and construction codes and regulations.
Les appareils doivent être installés par un électricien diplômé conformément à tous les codes et réglementations électriques et de construction nationaux et locaux.
Die Geräte sind von einem qualifizierten Elektriker in Übereinstimmung mit allen geltenden Vorschriften zu installieren.

Los dispositivos deben ser instalados por un electricista calificado y cumpliendo todas las normas y regulaciones, tanto nacionales como locales, sobre instalaciones eléctricas y obras.
I dispositivi devono essere installati da un elettricista qualificato in conformità con le norme locali e nazionali vigenti in materia di costruzioni edilizie e installazione di impianti elettrici.
De apparaten moeten worden aangebracht door een gekwalificeerde elektricien en in overeenstemming met alle nationale en plaatselijke elektriciteits- en bouwvoorschriften.

   / 
.

59 mm (2.32 in)

95 mm (3.74 in)

1 IEC Pollution Degree II

RJ12

105 mm (4.13 in) 75 mm (2.95 in)
45 mm (2 in)

1 ¡ ¢ £¤ 1¡ ¥¦ ¡ ¢ £0§¡ ¥¦

90%

45 mm (2 in)

2

SHLD

GND

RS-485

µP

DyNet D +

D -

+12 V

AUX/UL924

12 V

15 mA

IEC Overvoltage Category III

4
SERVICE LED SW

SERVICE SW LED

KNX
-+

3

DYNET

SERVICE

SHLD GND D + D - +12 V AUX/ LED SW UL924

+ KNX/EIB - Port
21-30 V <10 mA
5

GND AUX/UL924

<20 m

RS-485 DyNet

0.3-2.5 mm2 22-12 AWG

0.4 Nm 3.5 Lb-in

SHLD GND D+ D+12 V AUX/ UL924

SERVICE SW LED

KNX
-+

 2 A KNX

KNX 6

KNX

RS-485 DyNet

This is a class A product. In a domestic environment this product may cause radio interference, in which case the user may be required to take adequate measures.

© 2021 Signify Holding. All rights reserved. Specifications are subject to change without notice. No representation or warranty as to the accuracy or completeness of the information included herein is given and any liability for any action in reliance thereon is disclaimed. Philips and the Philips Shield Emblem are registered trademarks of Koninklijke Philips N.V. All other trademarks are owned by Signify Holding or their respective owners.

www.lighting.philips.com/dynalite
AZZ 423 0721 R15


PDFium PDFium