Included Items
Illustration showing the contents of the package.
- Spot Light Unit (x1)
- LED Driver (x1)
- Power Cable (x1)
- Screws (x2)
Mounting Instructions
Surface Mounting
Step 1: Mark the desired location. Drill a 10mm hole. Attach mounting bracket (A) with screws (B).
Step 2: Secure the spot light to the surface using the mounting bracket.
Step 3: Connect the power cable to the spot light.
Step 4: Illustrates the LED driver unit.
Step 5: Plug the LED driver into a standard wall socket.
Recess Mounting
Step 1: Mark the desired location. Drill a 60mm hole.
Step 2: Attach the mounting bracket.
Step 3: Insert the spot light into the prepared recess.
Illustration showing the 'Quick Connect' system for connecting cables.
Technical Specifications
Diagram showing the spot light's dimensions: Height 12.00mm, Outer Diameter 68.00mm, Inner Diameter 38.00mm.
| Specification | Details |
|---|---|
| Product Wattage | 2W |
| IP Rating | IP20 (mounted), IP44 (Recessed) |
| Input Voltage | 24V |
| Colour Temperature | 4000K |
This product contains a light source of energy efficiency grade E. The light source in this product will be damaged if it is removed. However, it can be replaced.
Safety, Warnings, and Maintenance
General Warnings
- Read these instructions carefully before proceeding. Keep these instructions in a safe place for future reference.
- It is recommended to consult a qualified electrician. All electrical installation must be carried out in accordance with current IEE wiring regulations (BS7671).
- These products must not be modified in any way or installed in any other way than dictated in these instructions.
- Any modifications may render the product unsafe and will void the product's warranty.
- This product is for indoor use only.
- Keep out of moisture and use only in dry rooms.
Waste Electrical & Electronic Equipment (WEEE)
The symbol on the product and/or accompanying document, the crossed out wheelie bin ?️, indicates that this product may not be treated as household waste. Instead, it should be handed over to the applicable collection point for the recycling of electrical and electronic waste.
Maintenance
- Ensure that the power is disconnected prior to cleaning.
- Wipe over with a cloth periodically.
- Do not use harsh chemical solvents, this may dis-colour or damage the finish.
Note
- Please ensure you use an appropriate driver with an adequate max wattage.
- Do not overload the LED Driver.
Sensio Lighting
