Geberit Delta Installation Manual

Overview

This document provides comprehensive installation instructions for Geberit Delta actuator plates. The manual is presented with titles in multiple languages: "MONTAGEANLEITUNG" (German), "INSTRUCTIONS DE MONTAGE" (French), and "ISTRUZIONI PER IL MONTAGGIO" (Italian), alongside the primary English title "INSTALLATION MANUAL".

The "KNOW HOW INSTALLED" emblem is featured, symbolizing professional installation expertise, depicted as a figure wearing a hard hat and holding tools.

The cover page illustrates various flush plate designs, including models with distinct rectangular and round button configurations.

Installation Procedure

Step 1: Mounting Bracket Installation

Secure the mounting bracket to the wall surface using screws. A PH 2 (Phillips head size 2) screwdriver is required for this step.

[Diagram: A wall mounting bracket is shown being attached to a wall using screws, with a PH 2 screwdriver indicated.]

Step 2: Frame Assembly and Wall Attachment

Assemble the metal frame and attach it to the previously installed wall bracket. This involves using screws and bolts, following a specific numbered sequence and directional arrows for proper assembly.

[Diagram: A metal frame is depicted being assembled and then attached to the wall bracket using screws and bolts, with numbered steps and arrows.]

Step 3: Cistern Unit Placement

Position the main cistern housing unit into the assembled frame and ensure it is securely fastened.

[Diagram: The main cistern housing unit is shown being placed and secured within the assembled frame.]

Step 4: Component Insertion

Insert a critical component, likely a water inlet or outlet valve mechanism, into its designated slot within the unit and lock it into place.

[Diagram: A specific component is shown being inserted and locked into the unit.]

Step 5: Water Supply Hose Connection

Connect the flexible water supply hose to the appropriate fitting. An indicator suggests a 30-second duration or flow rate check.

[Diagram: A flexible water supply hose is connected to a fitting, with a timer icon indicating '30 s'.]

Step 6: Mechanism Connection

Connect two distinct components, identified by the numbers 1 and 2, by tightening them as indicated by rotational arrows.

[Diagram: Components labeled 1 and 2 are shown being connected with rotational tightening indicated by arrows.]

Step 7: Flush Plate Attachment and Verification

Attach the flush plate to the front of the installed unit. A green checkmark symbol (✔️) signifies correct installation, while a red cross symbol (❌) indicates an incorrect installation. Water droplets are depicted, suggesting a water connection test.

[Diagram: A flush plate is being attached to the unit. A checkmark (✔️) indicates correct installation, and a cross (❌) indicates incorrect. Water droplets are shown.]

Step 8: Detailed Wall Mounting Adjustments

This step provides a detailed view of the wall mounting bracket assembly, illustrating how it is securely attached to the wall with screws and adjusted for depth, indicated by 'T'.

[Diagram: A close-up view of the wall mounting bracket assembly, showing screw attachment and depth adjustment 'T'.]

Section 2: Alternative Frame Assembly

This section outlines an alternative method for assembling the mounting frame.

Step 2.1: Frame Component Assembly

Assemble the various components of the frame. Directional arrows are used to guide the movement and placement of parts.

[Diagram: Frame components are shown being assembled, with directional arrows indicating the sequence of movement.]

Step 2.2: Lever Mechanism Attachment

Attach a lever mechanism to the assembled frame. This involves connecting parts labeled 1 and 2, with rotational arrows indicating the tightening process.

[Diagram: A lever mechanism is attached to the frame, connecting parts 1 and 2 with rotational tightening.]

Step 2.3: Frame Wall Mounting

Mount the fully assembled frame to the wall using screws. A PH 2 screwdriver is required for this operation.

[Diagram: The assembled frame is shown being mounted to the wall using screws, requiring a PH 2 screwdriver.]

Section 4: Actuator Plate Model Variations

This section illustrates different Geberit Delta actuator plate models and the process of attaching them:

• Delta50 square: Shown with screw attachment and an eye icon, suggesting visual inspection.
• Delta25 square: Shown with screw attachment and an eye icon for visual inspection.
• Delta25 round: Shown with screw attachment and an eye icon for visual inspection.
• Delta20 square: Shown with screw attachment and an eye icon for visual inspection.
• Delta20 round: Shown with screw attachment and an eye icon for visual inspection.
• Delta01 round: Shown with screw attachment and an eye icon for visual inspection.
• DeltaZero: Shown with screw attachment and an eye icon for visual inspection.

[Diagrams: Various Delta actuator plates (Delta50, Delta25, Delta20, Delta01, DeltaZero) are depicted being attached with screws and visually inspected.]

Section 5: Component Attachment to Frame

Attach a specific component to the frame using a mechanism involving parts labeled 1 and 2. Rotational arrows indicate the tightening procedure.

[Diagram: A component is attached to the frame via a mechanism with parts 1 and 2, showing rotational tightening.]

Section 6: Final Flush Plate Installation

Install the flush plate onto the main unit. The process is broken down into steps labeled 1, 2, and 3, with arrows indicating the sequence of actions.

[Diagram: The flush plate is shown being attached to the main unit, following a sequence of steps 1, 2, and 3.]

Section 7: Final Verification

Perform a final verification of the installation, indicated by a checkmark symbol (✔️). Water droplets are shown, suggesting a water connection test or confirmation.

[Diagram: A final check is performed, marked by a checkmark (✔️), with water droplets indicating a water-related test.]