Instruction Manual for TARGETTI models including: CCTLED TUBE Ceiling Suspensions and Wall, CCTLED TUBE, Ceiling Suspensions and Wall, Suspensions and Wall, Wall
May 15, 2022 — Belongs to the CCTLED range with different installation solutions: ceiling, suspension, wall and track. It also comes in the same power.
File Info : application/pdf, 16 Pages, 652.27KB
DocumentDocumentCeiling, Suspensions and Wall CCTLED TUBE GENERAL INFO Ceiling-mounted, pendant, wall-mounted or trackmounted luminaire for high output LED sources. Ø180mm LED Chip on board From 2269lm to 3755lm 3000K 4000K Ra80 - Ra90 PRODUCT EFFICACY Up to 123lm/W OPTICS SMART TECH FEEL POWER SUPPLY Electronic DALI Casambi controil system available using a dedicated accessory (only for DALI version products) MATERIAL Painted aluminium body. Painted polycarbonate decorative squared ring. Black painted die-cast aluminium internal frame and heat sink ON DEMAND Easy Custom Colour Ra97 2700K-3500K CCTLED TUBE Belongs to the CCTLED range with different installation solutions: ceiling, suspension, wall and track. It also comes in the same power supply and optics in order to use the same fixture in an entire project. The same uniform quality effect with different installation solutions. SMART, TECH, FEEL optics for a variety of environments, from retail, to hospitality, up to office spaces (SMART UGR<22, TECH UGR<19, FEEL UGR>19 - EN 12464-1). Indoor 512 CCTLED TUBE LED / 18W / FACETTED / VWFL Smart Facetted 250 Ø 180 Ø 140 2 IP20 ENEC Kg Certificate Driver Colour 3000K 4000K 2 ENEC EL. 1T3162 1T3163 2 ENEC DALI 1T3182 1T3183 LED / 25W / FACETTED / VWFL 2 IP20 ENEC Kg Certificate Driver Colour 3000K 4000K 2 ENEC EL. 1T3174 1T3175 2 ENEC DALI 1T3194 1T3195 LED / 18W / MATT / VWFL Smart Matt 250 Ø 180 Ø 140 2 IP20 ENEC Kg Certificate Driver Colour 3000K 4000K 2 ENEC EL. 1T3164 1T3165 2 ENEC EL. 1T4455 2 ENEC DALI 1T3184 1T3185 2 ENEC DALI 1T4457 LED / 25W / MATT / VWFL 2 IP20 ENEC Kg Certificate Driver Colour 3000K 4000K 2 ENEC EL. 1T3176 1T3177 2 ENEC EL. 1T4456 2 ENEC DALI 1T3196 1T3197 2 ENEC DALI 1T4458 Note Ra90: to order this version it is necessary to add the suffix "90" at the end of the standard code (Ra80). 513 Ceiling, Suspensions and Wall CCTLED TUBE Related codes Mounting System Eurostandard Plus track kit. Driver EL. DALI EL. Colour Code 1T0130 1T0130DA 1T4465 Ceiling mounting kit. Driver EL. DALI EL. DALI Colour Code 1T0123 1T0123DA 1T4466 1T4467 Suspension kit. L 1000 1000 6000 6000 Driver EL. DALI EL. DALI Colour Code 1T0124 1T0124DA 1T4469 1T4470 Double suspension kit. L 2000 2000 6000 6000 Driver EL. DALI EL. DALI Colour Code 1T3245 1T3246 1T4472 1T4473 Eurostandard Plus track suspension kit. Driver EL. Colour Code 1T7402 Eurostandard Plus track suspension kit. Driver DALI Colour Code 1T3242DA Wall mounting kit. Driver EL. DALI EL. DALI Colour Code 1T3449 1T3450 1T4475 1T4476 Wall mounting kit for double emission. Driver EL. DALI EL. DALI Colour Code 1T3452 1T3453 1T4478 1T4479 Indoor 514 CCTLED TUBE Accessories Decorative Ring Round ring. 180 Ø Colour Code 180 1T3248 180 Ø 180 Square ring with micro prismatic diffusive screen. Colour Code 1T3249 180 Ø 180 Square ring with external silk screen printed screen. Colour Code 1T3250 Adapter Ø100 H32 Ø H Driver Colour Code 100 32 EL. 100 32 EL. 100 32 EL. 1T2221 1T2220 1T2219 Base for ceiling installation of projectors with an adapter for electrified track. Ø118 H38 Ø H Driver Colour Code 118 38 DALI 118 38 DALI 118 38 DALI 9000/BPU-D-W 9000/BPU-D-B 9000/BPU-D-G Base for ceiling installation of projectors with an adapter for electrified track. Ø130 H60 Cutout hole Ø H Driver Ø105/125 130 60 EL. Ø105/125 130 60 EL. Ø105/125 130 60 EL. Adapter for recessed installation of the base. 1T2223 - To be completed with 1T2221. 1T2222 - To be completed with 1T2220. 1T2224 - To be completed with 1T2219. Colour Code 1T2223 1T2222 1T2224 Ø144 H67 Cutout hole Ø H Driver Ø125/130 144 Ø125/130 144 Ø125/130 144 67 DALI 67 DALI 67 DALI Adapter for recessed installation of the base. 9000/BRU-W - To be completed with 9000/BPU-D-W. 9000/BRU-B - To be completed with 9000/BPU-D-B. 9000/BRU-G - To be completed with 9000/BPU-D-G. Colour Code 9000/BRU-W 9000/BRU-B 9000/BRU-G 515 Ceiling, Suspensions and Wall CCTLED TUBE Control systems Code 1T5349 Wireless control unit for DALI fixtures. It generates a local DALI bus that can control individual fixtures. The module can be connected to an existing DALI network. The module is wireless controlled using a Casambi app for smartphones and tablets using Bluetooth 4.0 technology. The devices create a wireless mesh network that can control up to 128 fixtures. IP20. LxHxP=56.5x22.3x35.8mm. Code 1T5352 IP20 Extender for wireless control of DALI fixtures. It generates a local DALI bus with the capacity to drive up to 64 fixtures. Can control DALI fixtures in indoor applications via the Casambi application. It is also equipped with a relay that can control non-dimmable fixtures up to a maximum of 6A. LxHxP=129x30x42mm. Indoor 516 CCTLED TUBE LED / 15W / FACETTED / WFL Tech Secondary facetted 250 Ø 180 Ø 140 2 IP20 ENEC Kg Certificate Driver Colour 3000K 4000K 2 ENEC EL. 1T3166 1T3167 2 ENEC DALI 1T3186 1T3187 LED / 21W / FACETTED / WFL 2 IP20 ENEC Kg Certificate Driver Colour 3000K 4000K 2 ENEC EL. 1T3178 1T3179 2 ENEC DALI 1T3198 1T3199 Tech Secondary matt 250 Ø 180 Ø 140 LED / 15W / MATT / WFL 2 IP20 ENEC Kg Certificate Driver Colour 3000K 4000K 2 ENEC EL. 1T3168 1T3169 2 ENEC EL. 1T4459 2 ENEC DALI 1T3188 1T3189 2 ENEC DALI 1T4461 LED / 21W / MATT / WFL 2 IP20 ENEC Kg Certificate Driver Colour 3000K 4000K 2 ENEC EL. 1T3180 1T3181 2 ENEC EL. 1T4460 2 ENEC DALI 1T3200 1T3201 2 ENEC DALI 1T4462 Note Ra90: to order this version it is necessary to add the suffix "90" at the end of the standard code (Ra80). 517 Ceiling, Suspensions and Wall CCTLED TUBE Related codes Mounting System Eurostandard Plus track kit. Driver EL. DALI EL. Colour Code 1T0130 1T0130DA 1T4465 Ceiling mounting kit. Driver EL. DALI EL. DALI Colour Code 1T0123 1T0123DA 1T4466 1T4467 Suspension kit. L 1000 1000 6000 6000 Driver EL. DALI EL. DALI Colour Code 1T0124 1T0124DA 1T4469 1T4470 Double suspension kit. L 2000 2000 6000 6000 Driver EL. DALI EL. DALI Colour Code 1T3245 1T3246 1T4472 1T4473 Eurostandard Plus track suspension kit. Driver EL. Colour Code 1T7402 Eurostandard Plus track suspension kit. Driver DALI Colour Code 1T3242DA Wall mounting kit. Driver EL. DALI EL. DALI Colour Code 1T3449 1T3450 1T4475 1T4476 Wall mounting kit for double emission. Driver EL. DALI EL. DALI Colour Code 1T3452 1T3453 1T4478 1T4479 Indoor 518 CCTLED TUBE Accessories Decorative Ring Round ring. 180 Ø Colour Code 180 1T3248 180 Ø 180 Square ring with micro prismatic diffusive screen. Colour Code 1T3249 180 Ø 180 Square ring with external silk screen printed screen. Colour Code 1T3250 Adapter Ø100 H32 Ø H Driver Colour Code 100 32 EL. 100 32 EL. 100 32 EL. 1T2221 1T2220 1T2219 Base for ceiling installation of projectors with an adapter for electrified track. XL ring. For the TECH version. 180 Ø Colour Code 180 1T3251 Ø118 H38 Ø H Driver Colour Code 118 38 DALI 118 38 DALI 118 38 DALI 9000/BPU-D-W 9000/BPU-D-B 9000/BPU-D-G Base for ceiling installation of projectors with an adapter for electrified track. Ø130 H60 Cutout hole Ø H Driver Ø105/125 130 60 EL. Ø105/125 130 60 EL. Ø105/125 130 60 EL. Adapter for recessed installation of the base. 1T2223 - To be completed with 1T2221. 1T2222 - To be completed with 1T2220. 1T2224 - To be completed with 1T2219. Colour Code 1T2223 1T2222 1T2224 Ø144 H67 Cutout hole Ø H Driver Ø125/130 144 Ø125/130 144 Ø125/130 144 67 DALI 67 DALI 67 DALI Adapter for recessed installation of the base. 9000/BRU-W - To be completed with 9000/BPU-D-W. 9000/BRU-B - To be completed with 9000/BPU-D-B. 9000/BRU-G - To be completed with 9000/BPU-D-G. Colour Code 9000/BRU-W 9000/BRU-B 9000/BRU-G 519 Ceiling, Suspensions and Wall CCTLED TUBE Control systems Code 1T5349 Wireless control unit for DALI fixtures. It generates a local DALI bus that can control individual fixtures. The module can be connected to an existing DALI network. The module is wireless controlled using a Casambi app for smartphones and tablets using Bluetooth 4.0 technology. The devices create a wireless mesh network that can control up to 128 fixtures. IP20. LxHxP=56.5x22.3x35.8mm. Code 1T5352 IP20 Extender for wireless control of DALI fixtures. It generates a local DALI bus with the capacity to drive up to 64 fixtures. Can control DALI fixtures in indoor applications via the Casambi application. It is also equipped with a relay that can control non-dimmable fixtures up to a maximum of 6A. LxHxP=129x30x42mm. Indoor 520 CCTLED TUBE LED / 14W / FACETTED / VWFL Feel Facetted 250 Ø 180 Ø 140 2 IP20 ENEC Kg Certificate Driver Colour 3000K 4000K 2 ENEC EL. 1T3170 1T3171 2 ENEC DALI 1T3190 1T3191 Feel Matt 250 Ø 180 Ø 140 LED / 14W / MATT / WFL 2 IP20 ENEC Kg Certificate Driver Colour 3000K 4000K 2 ENEC EL. 1T3172 1T3173 2 ENEC EL. 1T4463 2 ENEC DALI 1T3192 1T3193 2 ENEC DALI 1T4464 Note Ra90: to order this version it is necessary to add the suffix "90" at the end of the standard code (Ra80). Related codes Mounting System Eurostandard Plus track kit. Driver EL. DALI EL. Colour Code 1T0130 1T0130DA 1T4465 Ceiling mounting kit. Driver EL. DALI EL. DALI Colour Code 1T0123 1T0123DA 1T4466 1T4467 521 Ceiling, Suspensions and Wall CCTLED TUBE Suspension kit. L 1000 1000 6000 6000 Driver EL. DALI EL. DALI Colour Code 1T0124 1T0124DA 1T4469 1T4470 Double suspension kit. L 2000 2000 6000 6000 Driver EL. DALI EL. DALI Colour Code 1T3245 1T3246 1T4472 1T4473 Eurostandard Plus track suspension kit. Driver EL. Colour Code 1T7402 Eurostandard Plus track suspension kit. Driver DALI Colour Code 1T3242DA Wall mounting kit. Accessories Decorative Ring Round ring. Driver EL. DALI EL. DALI Colour Code 1T3449 1T3450 1T4475 1T4476 180 Ø Colour Code 180 1T3248 Wall mounting kit for double emission. Driver EL. DALI EL. DALI Colour Code 1T3452 1T3453 1T4478 1T4479 180 Ø 180 Square ring with micro prismatic diffusive screen. Colour Code 1T3249 180 Ø 180 Square ring with external silk screen printed screen. Colour Code 1T3250 Indoor 522 CCTLED TUBE Adapter Ø100 H32 Ø H Driver Colour Code 100 32 EL. 100 32 EL. 100 32 EL. 1T2221 1T2220 1T2219 Base for ceiling installation of projectors with an adapter for electrified track. Ø118 H38 Ø H Driver Colour Code 118 38 DALI 118 38 DALI 118 38 DALI 9000/BPU-D-W 9000/BPU-D-B 9000/BPU-D-G Base for ceiling installation of projectors with an adapter for electrified track. Ø130 H60 Cutout hole Ø H Driver Ø105/125 130 60 EL. Ø105/125 130 60 EL. Ø105/125 130 60 EL. Adapter for recessed installation of the base. 1T2223 - To be completed with 1T2221. 1T2222 - To be completed with 1T2220. 1T2224 - To be completed with 1T2219. Colour Code 1T2223 1T2222 1T2224 Control systems Ø144 H67 Cutout hole Ø H Driver Ø125/130 144 Ø125/130 144 Ø125/130 144 67 DALI 67 DALI 67 DALI Adapter for recessed installation of the base. 9000/BRU-W - To be completed with 9000/BPU-D-W. 9000/BRU-B - To be completed with 9000/BPU-D-B. 9000/BRU-G - To be completed with 9000/BPU-D-G. Colour Code 9000/BRU-W 9000/BRU-B 9000/BRU-G Code 1T5349 Wireless control unit for DALI fixtures. It generates a local DALI bus that can control individual fixtures. The module can be connected to an existing DALI network. The module is wireless controlled using a Casambi app for smartphones and tablets using Bluetooth 4.0 technology. The devices create a wireless mesh network that can control up to 128 fixtures. IP20. LxHxP=56.5x22.3x35.8mm. Code 1T5352 IP20 Extender for wireless control of DALI fixtures. It generates a local DALI bus with the capacity to drive up to 64 fixtures. Can control DALI fixtures in indoor applications via the Casambi application. It is also equipped with a relay that can control non-dimmable fixtures up to a maximum of 6A. LxHxP=129x30x42mm. 523 Ceiling, Suspensions and Wall Requisites and information All fixtures of the Targetti collection have been designed and produced to comply with European Standard EN60598-1 relative to the safety requisite of light fixtures. DIRECTIVES EUROPEAN COUNCIL All fixtures comply with the following directives: EMC Directive 2014/30/EU LV Directive 2014/35/EU RoHS Directive 2011/65/EU Unless specified otherwise all fixtures are supplied without lamps; all fixtures are sold separately; all measurements are expressed in millimeters; all fixtures at low voltage are supplied without transformer; For products in Class III performance is only guaranteed using the electronic power supplies and drivers indicated in the catalogue. Consorzio ecolight Targetti Sankey Spa is a member of the Ecolight consortium that was set up in 2004 (D.Lgs. 49/2014) to comply with the provisions of the European Directive that was adopted in Italy as the European Directive 2012/19/EU for WEEE on managing, recovering and treating waste electrical and electronic equipment, used batteries and accumulators in compliance with all applicable legislation. The colors of the products illustrated are reproduced as faithfully as possible compatibly with the technical limitations of the printed medium. The company reserves the right to make changes to the production without notice. Reproduction of this catalogue or any part of it is prohibited. The products illustrated in this catalogue are covered by one or more Italian or international patents. The company will take legal action against any imitators. TARGETTI SANKEY SpA Certificated ISO 9001 n° 9130. TAR1 The Enec mark, awarding of the ISO9001 certificate and the CE brand all guarantee that the activities carried out internally in the company are governed and controlled by procedures which assure constant level of quality. Accredited laboratory in accordance with ISO 17025. Light beam apertures from to 5° 10° 11° 25° 26° 40° 41° 50° 51° 70° 71° 120° beam Narrow Spot Spot Flood Medium Wide Flood Wide Flood Very Wide Flood Wall Washer Narrow Asymmetric Asymmetric NSP SP FL MWFL WFL VWFL WW N. ASYM ASYM Icons legend Class I luminaire in which the protection against electrical shock is guaranteed by the connections of the conductive elements accessible to a protective conductor (earth connection). Luminaire in which the connection to a protective conductor (earth connection) guarantees the immunity to radio noises. Class II luminaire (double insulation), protected against the accidental contact with parts under tension from the user. Particular symbols 0,5 Weight of the single fixture. Cable length. Walk-over. III Class III luminaire, suitable for connection to very low voltage circuits. IP- - Solid particle and liquid ingress protection degree. IP- - Protection degree - Recessed part . IP- - Protection degree - Exposed part. IK-- Impact protection degree. ENEC ENEC European Norms Electrical Certification. Driver-over safe. SAFE FLICKER DBS Fixtures that have parameters below the minimum visibility threshold PstLM=1 and SVM0.4 (IEC TR 61547-1 and IEC TR 63158). Dynamic Beam Shaper optical technology with remote management of the beam opening. LED with Ra__ where not present in the catalogue, available on request. Different colour temperatures available on request. Custom finish of your choice from the Targetti Colours range and RAL indicated in the colour chart can be downloaded on line from the download section. Treatment carried out on request. Supplied on request with an integrated or remote 110-277Vac power supply as indicated for the standard model. LED version with a different "Tunable White" tone available on request. Note Please contact us for on demand treatments and versions. The performances reported on the products refer to the use of the recommended drivers. May 2022 EN