Owner's Manual for MSI models including: MS-6309 LE2 ATX Mainboard, MS-6309, LE2 ATX Mainboard, ATX Mainboard, Mainboard

• Google Docs
• Google Drive
• Download [pdf]
• Download Optimized
• Document:
  • Text

File Info : application/pdf, 17 Pages, 234.50KB

Introduction

Chapter 1. Introduction



The MS-6309 LE2 ATX mainboard is a high-performance computer mainboard based on VIA® VT82C694X chipset. The MS-6309 LE2 is designed for the Intel® CeleronTM or Coppermine(FC-PGA) processor for inexpensive business/personal desktop markets.
The Apollo Pro133A (VT82C694X) is a Socket-370 system logic north bridge with the addition of 133 MHz capability for both the CPU and SDRAM interfaces. Apollo Pro133A may be used to implement both desktop and notebook personal computer systems from 66MHz to 133MHz based on Socket-370. The primary features of the Apollo Pro133A-North Bridge are: Socket-370 CPU (Front Side Bus) Interface (66 / 100 / 133MHz), DRAM Memory Interface (66 / 100 / 133MHz), AGP Bus Interface (66MHz), PCI Bus Interface (33MHz), Mobile Power Management.
The VT82C686B PSIPC (PCI Super-I/O Integrated Peripheral Controller) is a high integration, high performance, power-efficient, and high compatibility device that supports Intel and non-Intel based processor to PCI bus bridge functionality to make a complete Microsoft PC99-compliant PCI/ISA system.
This chapter includes the following topics:

Mainboard Specification

1-2

Mainboard Layout

1-4

Mainboard Connectors

1-5

1-1

Chapter 1
Mainboard Specification
CPU ! Support Socket 370 for Intel® Pentium® III (FC-PGA)/Celeron (FC-PGA)
processor. ! Support 500MHZ, 553MHz, 600MHz,...1.1GHz.
Chipset ! VIA® 694X chipset. (510 BGA)
- Support 66/100/133MHz FSB - AGP 4x/2x and PCI plus Advanced ECC Memory Controller - Support PC100/133 SDRAM, VCM technology ! VIA® VT82C686B chipset. (352 BGA) - Advanced Power Management Features - Integrated Super I/O (FDC, LPT, COM 1/2, and IR) - DirectSound AC97 Audio - Dual bus Master IDE Ultra DMA33/66/100 - ACPI
Clock Generator ! 66.6MHz, 100MHz and133MHz clocks are supported.
Main Memory ! Support six memory banks using three 168-pin unbuffered DIMM. ! Support a maximum memory size of 1.5GB (32M x 8). ! Support ECC (1-bit Error Code Correct) function. ! Support 3.3v SDRAM DIMM.
Slots ! One AGP (Accelerated Graphics Port) slot.
- AGP specification compliant - AGP 66MHz 3.3v/1.5v for 2x/4x device support ! One AMR (Audio Modem Riser) slot. ! Five 32-bit Master PCI Bus slots and one 16-bit ISA bus slots. ! Supports 3.3v/5v PCI bus Interface.
On-Board IDE ! An IDE controller on the VIA® VT82C686B Chipset provides IDE HDD/
1-2

Introduction
CD-ROM with PIO, Bus Master and Ultra DMA 33/66/100 operation modes. ! Can connect up to four IDE devices. On-Board Peripherals ! On-Board Peripherals include:
- 1 floppy port supports 2 FDD with 360K, 720K, 1.2M, 1.44M and 2.88Mbytes.
- 2 serial ports (COMA + COMB) - 1 parallel port supports SPP/EPP/ECP mode - 4 USB ports Audio ! Chip Integrated (Software Audio) -AC97 Compliant BIOS ! The mainboard BIOS provides Plug & Play BIOS which detects the peripheral devices and expansion cards of the board automatically. ! The mainboard provides a Desktop Management Interface(DMI) function which records your mainboard specifications. Dimension ! ATX Form Factor : 30.5cm (L) x 19.2cm (W) x 4 layers PCB Mounting ! 6 mounting holes.
1-3

Chapter 1
Mainboard Layout

ATX Power Supply .,,

Top : mouse Bottom: keyboard
USB Ports

C P U FA N

SOCKET 370

DIMM 3 DIMM 2 DIMM 1

Top : Parallel Port
Bottom: COM A COM B

Top : Game port
Bottom: Line-Out Line-In Mic

JCD JAUX JPH

Codec

B AT T +
ISA Slot

VIA VT82C694X

R GND L
JCD

AGP Slot

R GND L
JAUX

1,- 1,-

AMR Slot PCI Slot 1

USB2

Mono_Out GND Phone_In
JPH

PCI Slot 2
PCI Slot 3
PCI Slot 4 JWOL1
PCI Slot 5

VT82C 686B

JBAT1

JMDM1

BIOS

S Y S FA N JFP1

MS-6309 LE2 ATX Mainboard

1 2 3
JBAT1

=
Keep Data

Clear Data

Re se t Switc h
15 Spe a ke r 14
Buzze r

Po we r Switc h +
Po we r LED
Po we rLED + HDD

JFP1

1-4

Mainboard Connectors

1 3
2

LPT 1

4

COM A

COM B

5

Introduction

1 Mouse Connector

Pin6 NC

Pin5 Mo use C lo c k

Pin4 VC C

Pin3 G ND

Pin2 NC

Pin1 Mo use DATA

2 Keyboard Connector

Pin6 NC

Pin5 KBD C lo c k

Pin4 VC C

Pin3 G ND

Pin2 NC

Pin1 KBD DATA

3 USB Ports

 !"

USB Port 1 USB Port 2

PIN SIGNAL 1 VCC 2 -Data 3 +Data 4 GND

4 Joystick/MIDI
5 Audio Ports
Line Line MIC Out In

1-5

AMI® BIOS Setup

Chapter 2. AMI® ABMIOI®SBSIeOtuSpSetup

The mainboard uses AMI® BIOS ROM that provides a Setup utility for users to modify the basic system configuration. The information is stored in a battery-backed CMOS RAM so it retains the Setup information when the power is turned off.

This chapter provides you with the overview of the BIOS Setup program. It contains the following topics:

Entering Setup

2-2

Standard CMOS Setup

2-4

BIOS Features Setup

2-5

Chipset Features Setup

2-6

Power Management Setup

2-7

PNP/PCI Configuration

2-8

Integrated Peripherals

2-9

Hardware Monitor Setup

2-10

IDE HDD AUTO Detection

2-11

Supervisor/User Password

2-12

2-1

Chapter 2
Entering Setup
Enter the AMI® setup Programs Main Menu as follows: 1. Turn on or reboot the system. The following screen appears with
a series of diagnostic check.
AMIBIOS (C) 1999 American Megatrends Inc. A6309 VXXX XXXXXX Hit <DEL> if you want to run setup
(C) American Megatrends Inc. 61-XXXX-001169-00111111-071592-i82440FX-H
2. When the Hit <DEL> message appears, press <DEL> key to enter the BIOS setup screen.
3. After pressing <DEL> key, the BIOS setup screen will appear.
Note: If you dont want to modify CMOS original setting, then dont press any key during the system boot.
2-2

AMI® BIOS Setup

AMIBIOS SIMPLE SETUP UTILITIES - VERSION 1.20 (C) 1998 American Megatrends, Inc. All Rights Reserved

Standard CMOS Setup BIOS Features Setup Chipset Features Setup Power Management Setup PNP/PCI Configuration Load BIOS Defaults Load Setup Defaults

Integrated Peripherals Hardware Monitor Setup Supervisor Password User Password IDE HDD Auto Detection Save and Exit Setup Exit Without Saving

Esc :Quit

    : Select Item (Shift)F2: Change Color F5: Old Values

F6 :Load BIOS Defaults

F7 :Load Setup Defaults

F10: Save & Exit

Standard CMOS Setup for changing time, date , hard disk, etc.
4. Use the <Up> and <Down> key to move the highlight scroll up or down.
5. Use the <ENTER> key to select the option. 6. To exit, press <ESC>. To save and exit, press <F10>.

2-3

Chapter 2
Standard CMOS Setup
1. Press <ENTER> on Standard CMOS Setup of the main menu screen .

AMIBIOS SETUP - STANDARD CMOS SETUP (C)1999 American Megatrends,Inc.All Rights Reserved

Date (mm/dd/yyyy): Time (hh/mm/ss):

Fri Oct 29, 1999 17:09:25

Type Pri Master :Auto Pri Slave :Auto Sec Master :Auto Sec Slave :Auto

Size

Cyln

Head

WPcom Sec

LBA Mode ON ON ON ON

Blk Mode ON ON ON ON

PIO Mode AUTO AUTO AUTO AUTO

32Bit Mode ON ON ON ON

Floppy Drive A: Floppy Drive B:

1.44 MB 3 1/2 Not Installed

Boot Sector Virus Protection Disabled

Available Options: Disabled Enabled

Base Memory : 0 Kb Other Memory : 384 Kb Extended Memory : 0 Mb Total Memory : 1 Mb
ESC:Exit :Select Item PU/PD/+/-:Modify (Shift)F2:Color

2. Use <Up> and <Down> to choose the item and <PgUp> and <PgDn> keys to modify the highlighted item.
3. After you have finished with the Standard CMOS Setup, press <ESC> to go back to the main menu.

2-4

BIOS Features Setup

AMI® BIOS Setup

1. Press <ENTER> on BIOS Features Setup of the main menu screen.

AMIBIOS SETUP - BIOS FEATURES SETUP (C) 1999 American Megatrends, Inc. All Rights Reserved

Quick Boot 1st Boot Device 2nd Boot Device 3rd Boot Device Initial Display Mode S.M.A.R.T. For Hard Disk Boot Num-Lock Floppy Drive Swap Floppy Drive Seek Password Check Boot to OS/2 > 64M CPU Serial Number L2 Cache Cache Bus ECC System BIOS Cacheable C000, 32k Shadow C800, 16K Shadow CC00, 16K Shadow D000, 16K Shadow D400, 16K Shadow

:Enabled :Floppy :IDE-0

D800, 16K Shadow DC00, 16K Shadow

:Disabled :Disabled

:CDROM

:BIOS

:Disabled

:On

:Disabled

:Disabled

:Setup

:No

:Enabled

:Write Back

:Disabled

:Enabled :Disabled :Disabled :Disabled

ESC:Exit

 :Select Item

F1 :Help

PU/PD/+/-:Modify

F5 :Old Values (Shift)F2:Color

F6 :Load BIOS Defaults

:Disabled F7 :Load Setup Defauls :Disabled

2. Use <Up> and <Down> to choose the item and <PgUp> and <PgDn> keys to modify the highlighted item.
3. After you have finished with the BIOS Features Setup, press <ESC> to go back to the main menu.

2-5

Chapter 2
Chipset Features Setup

1. Press <ENTER> on Chipset Features Setup of the main menu screen.

AMIBIOS SETUP - CHIPSET FEATURES SETUP (C) 1999 American Megatrends, Inc. All Rights Reserved

Set SDRAM Timing by SPD DRAM Frequency SDRAM CAS# Latency DRAM Integrity Mode CPU In Order Queue Memory Hole AGP Mode AGP Comp. Driving Manual AGP Comp. Driving AGP Aperture Size
USB Controller USB KB/Mouse Legacy USB 60/64 Port Emulation

:Disabled :100Mhz :3 :Disabled :4-Level :Disabled :Auto :Auto :CB :64MB

:USB Port 0&1 :Disabled :Disabled

ESC:Exit

:Select Item

F1 :Help

PU/PD/+/-:Modify

F5 :Old Values (Shift)F2:Color

F6 :Load BIOS Defaults

F7 :Load Setup Defauls

2. Use <Up> and <Down> to choose the item and <PgUp> and <PgDn> keys to modify the highlighted item.
3. After you have finished with the Chipset Features Setup, press <ESC> to go back to the main menu.

2-6

Power Management Setup

AMI® BIOS Setup

1. Press <ENTER> on Power Management Setup of the main menu screen.

AMIBIOS SETUP - POWER MANAGEMENT SETUP (C) 1999 American Megatrends, Inc. All Rights Reserved

Compliance With O/S ACPI Standby State Power Management/APM Green PC LED Status Video Power Down Mode Hard Disk Power Down Mode Standby Time Out (Minute) Suspend Time Out (Minute) Throttle Slow Clock Ratio Display Activity IRQ3 IRQ4 IRQ5 IRQ7 IRQ9 IRQ10 IRQ11 IRQ13 IRQ14 IRQ15

:Yes :S1/POS :Enabled :Dual Color :Suspend :Stand-by :Disabled :Disabled :50%-56.25% :Ignore :Monitor :Monitor :Ignore :Monitor :Ignore :Ignore :Ignore :Ignore :Monitor :Ignore

System Thermal Thermal Slow Clock Ratio Power Button Function Restore on AC/Power Loss Resume On Ring/LAN Resume On PME# Resume On RTC Alarm RTC Alarm Date RTC Alarm Hour RTC Alarm Minute RTC Alarm Second

:Ignore :50%-56.25% :On/Off :Last State :Enabled :Disabled :Disabled :15 :12 :30 :30

ESC:Exit

 :Select Item

F1 :Help

PU/PD/+/-:Modify

F5 :Old Values (Shift)F2:Color

F6 :Load BIOS Defaults

F7 :Load Setup Defauls

2. Use <Up> and <Down> to choose the item and <PgUp> and <PgDn> keys to modify the highlighted item.
3. After you have finished with the Power Management Setup, press <ESC> to go back to the main menu.

2-7

Chapter 2
PNP/PCI Configuration

1. Press <ENTER> on PNP/PCI Configuration of the main menu screen.

AMIBIOS SETUP - PNP/PCI CONFIGURATION (C) 1999 American Megatrends, Inc. All Rights Reserved

PnP Aware O/S Clear NVRAM PCI Latency Timer Primary Graphics Adapter PCI VGA Palette Snoop DMA Channel 0 DMA Channel 1 DMA Channel 3 DMA Channel 5 DMA Channel 6 DMA Channel 7 IRQ3 IRQ4 IRQ5 IRQ7 IRQ9 IRQ10 IRQ11 IRQ14 IRQ15

:No

:No

:64

:PCI

:Disabled

:PnP

:PnP

:PnP

:PnP

:PnP

:PnP

:PCI/PnP

:PCI/PnP

:PCI/PnP

:PCI/PnP :PCI/PnP :PCI/PnP :PCI/PnP

ESC:Exit

:Select Item

F1 :Help

PU/PD/+/-:Modify

F5 :Old Values (Shift)F2:Color

F6 :Load BIOS Defaults

:PCI/PnP F7 :Load Setup Defauls

:PCI/PnP

2. Use <Up> and <Down> to choose the item and <PgUp> and <PgDn> keys to modify the highlighted item.
3. After you have finished with the PNP/PCI Configuration, press <ESC> to go back to the main menu.

2-8

Integrated Peripherals

AMI® BIOS Setup

1. Press <ENTER> on Integrated Peripherals of the main menu screen.

AMIBIOS SETUP - INTEGRATED PERIPHERALS (C) 1999 American Megatrends, Inc. All Rights Reserved

Onboard IDE Onboard FDC Onboard Serial Port 1 Onboard Serial Port 2
Serial Port 2 Mode Duplex Mode
Onboard Parallel Port Parallel Port Mode EPP Version Parallel Port DMA Parallel Port IRQ
Onboard AC'97 Audio Onboard MC'97 Modem Codec Variable Rate OnBoard Legacy Audio Sound Blaster

:Both

:Auto

:Auto

:Auto

:Normal

:N/A

:Auto

:ECP

:N/A

:Auto

:Auto

:Enabled

:Disabled

:Enabled

:Enabled ESC:Exit :Disabled F1 :Help

:Select Item PU/PD/+/-:Modify

F5 :Old Values (Shift)F2:Color

F6 :Load BIOS Defaults

F7 :Load Setup Defauls

2. Use <up> and <down> to choose the item and <PgUp> and <PgDn> keys to modify the highlighted item.
3. After you have finished with the Integrated Peripherals, press <ESC> to go back to the main menu.

2-9

Chapter 2
Hardware Monitor Setup
1. Press <ENTER> on Hardware Monitor Setup of the main menu screen.

AMIBIOS SETUP - Hardware Monitor Setup (C) 1999 American Megatrends, Inc. All Rights Reserved

ClkGen Spread Spectrum CPU Host/PCI Clock (MHz) CPU Ratio Selection CPU Vcore Selection
-= System Monitor =Current CPU Temperature Current System Temperature Current CPU Fan Speed Current Chassis Fan Speed
Vcore +2.500V +3.300V +5.000V +12.000V

:Enabled :Auto :3.0X :Auto

:45oC/113oF

:32oC/89oF

:5200 RPM

:0 RPM

:2.112V

:2.575V

:3.373V

:4.946V

:11.986V

ESC:Exit

:Select Item

F1 :Help

PU/PD/+/-:Modify

F5 :Old Values (Shift)F2:Color

F6 :Load BIOS Defaults

F7 :Load Setup Defauls

2. Use <up> and <down> to choose the item and <PgUp> and <PgDn> keys to modify the highlighted item.
3. After you have finished with the Peripheral Setup, press <ESC> to go back to the main menu.

2-10

IDE HDD AUTO Detection

AMI® BIOS Setup

You can use this utility to automatically detect the characteristics of most hard drives.

AMIBIOS SETUP - STANDARD CMOS SETUP (C)1999 American Megatrends,Inc.All Rights Reserved

Date (mm/dd/yyyy): Time (hh/mm/ss):

Fri Oct 29, 1999 17:09:25

Type Pri Master :Auto Pri Slave :Auto Sec Master :Auto Sec Slave :Auto

Size

Cyln

Head

WPcom Sec

LBA Mode ON ON ON ON

Blk Mode ON ON ON ON

PIO Mode AUTO AUTO AUTO AUTO

32Bit Mode ON ON ON ON

Floppy Drive A: Floppy Drive B:

1.44 MB 3 1/2 Not Installed

Boot Sector Virus Protection Disabled

Available Options: Disabled Enabled

Base Memory : 0 Kb Other Memory : 384 Kb Extended Memory : 0 Mb Total Memory : 1 Mb
ESC:Exit :Select Item PU/PD/+/-:Modify (Shift)F2:Color

2-11

Chapter 2
Supervisor/User Password
This Main Menu item lets you configure the system so that a password is required each time the system boots or an attempt is made to enter the Setup program. Supervisor Password allows you to change all CMOS settings but the User Password setting doesnt have this function. The way to set up the passwords for both Supervisor and User are as follow:
1. Choose Supervisor/User Password in the Main Menu and press <Enter>. The following message appears:
Enter New Supervisor/User Password:
2. The first time you run this option, enter your password up to 6 characters only and press <Enter>. The screen will not display the entered characters. For no password, just press <Enter>.
3. After you enter the password, the following message appears prompting you to confirm the password:
Retype New Supervisor/User Password:
4. Enter exactly the same password you just typed in to confirm the password and press <Enter>.
5. Move the cursor to Save and Exit Setup to save the password.
6. If you need to delete the password you entered before, choose the Supervisor/User Password and press <Enter>. It will delete the password that you had before.
7. Move the cursor to Save and Exit Setup to save the option you did. Otherwise, the old password will still be there when you turn on your machine next time.
2-12